linux-toradex.git/drivers/pinctrl, branch v4.9.66

pinctrl: sirf: atlas7: Add missing 'of_node_put()'

2017-11-30T08:39:12+00:00

[ Upstream commit 7af355e6715b325d8af29822f4c3dbecd7eeebec ]

Reference to 'sys2pci_np' should be dropped in all cases here, not only in
error handling path.

Signed-off-by: Christophe JAILLET 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: baytrail: Fix debugfs offset output

2017-11-15T14:53:13+00:00

[ Upstream commit 3655a1ca6bd8e7300f2bb196208d5139aa6b2eda ]

Apparently each GPIO pad's register are 16 bytes, so multiply the pad_map
by that. The same is done in byt_gpio_reg the only other place where
pad_map is used.

Signed-off-by: Alexander Stein 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl/amd: Fix build dependency on pinmux code

2017-10-18T07:35:39+00:00

commit 83b31c2a5fdd4fb3a4ec84c59a962e816d0bc9de upstream.

The commit 79d2c8bede2c93f943 ("pinctrl/amd: save pin registers over
suspend/resume") caused the following compilation errors:

drivers/pinctrl/pinctrl-amd.c: In function ‘amd_gpio_should_save’:
drivers/pinctrl/pinctrl-amd.c:741:8: error: ‘const struct pin_desc’ has no member named ‘mux_owner’
  if (pd->mux_owner || pd->gpio_owner ||
        ^
drivers/pinctrl/pinctrl-amd.c:741:25: error: ‘const struct pin_desc’ has no member named ‘gpio_owner’
  if (pd->mux_owner || pd->gpio_owner ||

We need to enable CONFIG_PINMUX for this driver as well.

Fixes: 79d2c8bede2c93f943 ("pinctrl/amd: save pin registers over suspend/resume")
Signed-off-by: Petr Mladek 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl/amd: save pin registers over suspend/resume

2017-09-27T12:39:19+00:00

commit 79d2c8bede2c93f9432d7da0bc2f76a195c90fc0 upstream.

The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is
unresponsive after suspend/resume. The following error appears during
resume:

  i2c_hid i2c-ELAN1300:00: failed to reset device.

The problem here is that i2c_hid does not notice the interrupt being
generated at this point, because the GPIO is no longer configured
for interrupts.

Fix this by saving pinctrl-amd pin registers during suspend and
restoring them at resume time.

Based on code from pinctrl-intel.

Signed-off-by: Daniel Drake 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry

2017-08-16T20:43:24+00:00

commit 34e61801a3b9df74b69f0e359d64a197a77dd6ac upstream.

GPIODV_18 entry was missing in the original driver push.

Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC")
Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: samsung: Remove bogus irq_[un]mask from resource management

2017-08-16T20:43:23+00:00

commit 3fa53ec2ed885b0aec3f0472e3b4a8a6f1cd748c upstream.

The irq chip callbacks irq_request/release_resources() have absolutely no
business with masking and unmasking the irq.

The core code unmasks the interrupt after complete setup and masks it
before invoking irq_release_resources().

The unmask is actually harmful as it happens before the interrupt is
completely initialized in __setup_irq().

Remove it.

Fixes: f6a8249f9e55 ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs")
Signed-off-by: Thomas Gleixner 
Cc: Krzysztof Kozlowski 
Cc: Sylwester Nawrocki 
Cc: Linus Walleij 
Cc: Kukjin Kim 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Acked-by: Tomasz Figa 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20

2017-08-16T20:43:23+00:00

commit 1bd303dc04c3f744474e77c153575087b657f7e1 upstream.

The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show().
Filling non-existing ports with '-1' turned out a bad idea.

Fixes: 336306ee1f2d ("pinctrl: uniphier: add UniPhier PH1-LD20 pinctrl driver")
Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11

2017-08-16T20:43:23+00:00

commit 9592bc256d50481dfcdba93890e576a728fb373c upstream.

The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show().
Filling non-existing ports with '-1' turned out a bad idea.

Fixes: 70f2f9c4cf25 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver")
Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: intel: merrifield: Correct UART pin lists

2017-08-16T20:43:23+00:00

commit 5d996132d921c391af5f267123eca1a6a3148ecd upstream.

UART pin lists consist GPIO numbers which is simply wrong.
Replace it by pin numbers.

Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Signed-off-by: Andy Shevchenko 
Acked-by: Mika Westerberg 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver

2017-08-16T20:43:22+00:00

commit d81ece747d8727bb8b1cfc9a20dbe62f09a4e35a upstream.

The PH16 pin has a function with mux id 0x5, which is the DET pin of the
"sim" (smart card reader) IP block.

This function is missing in old versions of A10/A20 SoCs' datasheets and
user manuals, so it's also missing in the old drivers. The newest A10
Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and
it's discovered during implementing R40 pinctrl driver.

Add it to the driver. As we now merged A20 pinctrl driver to the A10
one, we need to only fix the A10 driver now.

Fixes: f2821b1ca3a2 ("pinctrl: sunxi: Move Allwinner A10 pinctrl
driver to a driver of its own")

Signed-off-by: Icenowy Zheng 
Reviewed-by: Chen-Yu Tsai 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman