linux-toradex.git/drivers/pinctrl, branch v5.7-rc2 Linux kernel for Apalis and Colibri modules Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio 2020-04-04T17:27:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-04-04T17:27:00+00:00 828907ef25e0133f50c346ef5a3c79a707a9b100 Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO development for the v5.7 kernel cycle. Core and userspace API: - The userspace API KFIFOs have been imoproved with locks that do not block interrupts. This makes us better at getting events to userspace without blocking or disturbing new events arriving in the same time. This was reviewed by the KFIFO maintainer Stefani. This is a generic improvement which paves the road for similar improvements in other subsystems. - We provide a new ioctl() for monitoring changes in the line information, such as when multiple clients are taking lines and giving them back, possibly reconfiguring them in the process: we can now monitor that and not get stuck with stale static information. - An example tool 'gpio-watch' is provided to showcase this functionality. - Timestamps for events are switched to ktime_get_ns() which is monotonic. We previously had a 'realtime' stamp which could move forward and *backward* in time, which probably would just cause silent bugs and weird behaviour. In the long run we see two relevant timestamps: ktime_get_ns() or the timestamp sometimes provided by the GPIO hardware itself, if that exists. - Device Tree overlay support for GPIO hogs. On systems that load overlays, these overlays can now contain hogs, and will then be respected. - Handle pin control interaction with nonexisting pin ranges in the GPIO library core instead of in the individual drivers. New drivers: - New driver for the Mellanox BlueField 2 GPIO controller. Driver improvements: - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO library and use this flag in the MT7621 driver. - Texas Instruments OMAP CPU power management improvements, such as blocking of idle on pending GPIO interrupts" * tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits) Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()" pinctrl: Unconditionally assign .request()/.free() gpio: Unconditionally assign .request()/.free() gpio: export of_pinctrl_get to modules pinctrl: Define of_pinctrl_get() dummy for !PINCTRL gpio: Rename variable in core APIs gpio: Avoid using pin ranges with !PINCTRL gpiolib: Remove unused gpio_chip parameter from gpio_set_bias() gpiolib: Pass gpio_desc to gpio_set_config() gpiolib: Introduce gpiod_set_config() tools: gpio: Fix out-of-tree build regression gpio: gpiolib: fix a doc warning gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1 gpio: tegra186: Add support for pin ranges gpio: Support GPIO controllers without pin-ranges ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro gpio: brcmstb: support gpio-line-names property tools: gpio: Fix typo in gpio-utils tools: gpio-hammer: Apply scripts/Lindent and retain good changes gpiolib: gpio_name_to_desc: factor out !name check ... 
Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO development for the v5.7 kernel cycle.

  Core and userspace API:

   - The userspace API KFIFOs have been imoproved with locks that do not
     block interrupts. This makes us better at getting events to
     userspace without blocking or disturbing new events arriving in the
     same time. This was reviewed by the KFIFO maintainer Stefani. This
     is a generic improvement which paves the road for similar
     improvements in other subsystems.

   - We provide a new ioctl() for monitoring changes in the line
     information, such as when multiple clients are taking lines and
     giving them back, possibly reconfiguring them in the process: we
     can now monitor that and not get stuck with stale static
     information.

   - An example tool 'gpio-watch' is provided to showcase this
     functionality.

   - Timestamps for events are switched to ktime_get_ns() which is
     monotonic. We previously had a 'realtime' stamp which could move
     forward and *backward* in time, which probably would just cause
     silent bugs and weird behaviour. In the long run we see two
     relevant timestamps: ktime_get_ns() or the timestamp sometimes
     provided by the GPIO hardware itself, if that exists.

   - Device Tree overlay support for GPIO hogs. On systems that load
     overlays, these overlays can now contain hogs, and will then be
     respected.

   - Handle pin control interaction with nonexisting pin ranges in the
     GPIO library core instead of in the individual drivers.

  New drivers:

   - New driver for the Mellanox BlueField 2 GPIO controller.

  Driver improvements:

   - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
     library and use this flag in the MT7621 driver.

   - Texas Instruments OMAP CPU power management improvements, such as
     blocking of idle on pending GPIO interrupts"

* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
  Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
  pinctrl: Unconditionally assign .request()/.free()
  gpio: Unconditionally assign .request()/.free()
  gpio: export of_pinctrl_get to modules
  pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
  gpio: Rename variable in core APIs
  gpio: Avoid using pin ranges with !PINCTRL
  gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
  gpiolib: Pass gpio_desc to gpio_set_config()
  gpiolib: Introduce gpiod_set_config()
  tools: gpio: Fix out-of-tree build regression
  gpio: gpiolib: fix a doc warning
  gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
  gpio: tegra186: Add support for pin ranges
  gpio: Support GPIO controllers without pin-ranges
  ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
  gpio: brcmstb: support gpio-line-names property
  tools: gpio: Fix typo in gpio-utils
  tools: gpio-hammer: Apply scripts/Lindent and retain good changes
  gpiolib: gpio_name_to_desc: factor out !name check
  ...
Merge tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2020-04-02T22:47:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-04-02T22:47:18+00:00 bc3b3f4bfbded031a11c4284106adddbfacd05bb Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.7 kernel cycle. There are no core changes this time, only driver developments: - New driver for the Dialog Semiconductor DA9062 Power Management Integrated Circuit (PMIC). - Renesas SH-PFC has improved consistency, with group and register checks in the configuration checker. - New subdriver for the Qualcomm IPQ6018. - Add the RGMII pin control functionality to Qualcomm IPQ8064. - Performance and code quality cleanups in the Mediatek driver. - Improve the Broadcom BCM2835 support to cover all the GPIOs that exist in it. - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on suspend. - Add some missing groups and functions to the Ingenic driver. - Convert some of the Freescale device tree bindings to use the new and all improved JSON YAML markup. - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC driver. - Support high impedance mode in the Spreadtrum/Unisoc driver" * tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits) pinctrl: qcom: fix compilation error pinctrl: qcom: use scm_call to route GPIO irq to Apps pinctrl: sprd: Add pin high impedance mode support pinctrl: sprd: Use the correct pin output configuration pinctrl: tegra: Add SFIO/GPIO programming on Tegra194 pinctrl: tegra: Renumber the GG.0 and GG.1 pins pinctrl: tegra: Do not add default pin range on Tegra194 pinctrl: tegra: Pass struct tegra_pmx for pin range check pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo pinctrl: tegra: Fix whitespace issues for improved readability pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow pinctrl: freescale: drop the dependency on ARM64 for i.MX8M Revert "pinctrl: mvebu: armada-37xx: use use platform api" dt-bindings: pinctrl: at91: Fix a typo ("descibe") pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm pinctrl: sprd: Fix the kconfig warning pinctrl: ingenic: add hdmi-ddc pin control group pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member pinctrl: sprd: Allow the SPRD pinctrl driver building into a module pinctrl: Export some needed symbols at module load time ... 
Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.7 kernel cycle.

  There are no core changes this time, only driver developments:

   - New driver for the Dialog Semiconductor DA9062 Power Management
     Integrated Circuit (PMIC).

   - Renesas SH-PFC has improved consistency, with group and register
     checks in the configuration checker.

   - New subdriver for the Qualcomm IPQ6018.

   - Add the RGMII pin control functionality to Qualcomm IPQ8064.

   - Performance and code quality cleanups in the Mediatek driver.

   - Improve the Broadcom BCM2835 support to cover all the GPIOs that
     exist in it.

   - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
     suspend.

   - Add some missing groups and functions to the Ingenic driver.

   - Convert some of the Freescale device tree bindings to use the new
     and all improved JSON YAML markup.

   - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC
     driver.

   - Support high impedance mode in the Spreadtrum/Unisoc driver"

* tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits)
  pinctrl: qcom: fix compilation error
  pinctrl: qcom: use scm_call to route GPIO irq to Apps
  pinctrl: sprd: Add pin high impedance mode support
  pinctrl: sprd: Use the correct pin output configuration
  pinctrl: tegra: Add SFIO/GPIO programming on Tegra194
  pinctrl: tegra: Renumber the GG.0 and GG.1 pins
  pinctrl: tegra: Do not add default pin range on Tegra194
  pinctrl: tegra: Pass struct tegra_pmx for pin range check
  pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo
  pinctrl: tegra: Fix whitespace issues for improved readability
  pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow
  pinctrl: freescale: drop the dependency on ARM64 for i.MX8M
  Revert "pinctrl: mvebu: armada-37xx: use use platform api"
  dt-bindings: pinctrl: at91: Fix a typo ("descibe")
  pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm
  pinctrl: sprd: Fix the kconfig warning
  pinctrl: ingenic: add hdmi-ddc pin control group
  pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member
  pinctrl: sprd: Allow the SPRD pinctrl driver building into a module
  pinctrl: Export some needed symbols at module load time
  ...
pinctrl: Unconditionally assign .request()/.free() 2020-04-02T07:17:16+00:00 Thierry Reding treding@nvidia.com 2020-04-01T20:05:27+00:00 d6471d6e09d436617c38293b55b6f0326e7a2d68 The gpiochip_generic_request() and gpiochip_generic_free() functions can now deal properly with chips that don't have any pin-ranges defined, so they can be assigned unconditionally. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200401200527.2982450-2-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The gpiochip_generic_request() and gpiochip_generic_free() functions can
now deal properly with chips that don't have any pin-ranges defined, so
they can be assigned unconditionally.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200401200527.2982450-2-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: export of_pinctrl_get to modules 2020-04-01T06:01:39+00:00 Stephen Rothwell sfr@canb.auug.org.au 2020-04-01T04:19:04+00:00 33dd888263199676946f1c789e821d39a9a79d98 Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200401151904.6948af20@canb.auug.org.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200401151904.6948af20@canb.auug.org.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: qcom: fix compilation error 2020-03-31T14:43:54+00:00 Ansuel Smith ansuelsmth@gmail.com 2020-03-31T13:46:03+00:00 c42f69b4207e104229242c3d9da43b55d4b95d6d pinctrl: qcom: use scm_call to route GPIO irq to Apps has a typo in the patch and introduced a compilation error. Fixes: 13bec8d4 pinctrl: qcom: use scm_call to route GPIO irq to Apps Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20200331134603.13513-1-ansuelsmth@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
pinctrl: qcom: use scm_call to route GPIO irq to Apps has a typo in the
patch and introduced a compilation error.

Fixes: 13bec8d4 pinctrl: qcom: use scm_call to route GPIO irq to Apps
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20200331134603.13513-1-ansuelsmth@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-03-31T00:35:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-03-31T00:35:14+00:00 2d385336afcc43732aef1d51528c03f177ecd54e Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Treewide: - Cleanup of setup_irq() which is not longer required because the memory allocator is available early. Most cleanup changes come through the various maintainer trees, so the final removal of setup_irq() is postponed towards the end of the merge window. Core: - Protection against unsafe invocation of interrupt handlers and unsafe interrupt injection including a fixup of the offending PCI/AER error injection mechanism. Invoking interrupt handlers from arbitrary contexts, i.e. outside of an actual interrupt, can cause inconsistent state on the fragile x86 interrupt affinity changing hardware trainwreck. Drivers: - Second wave of support for the new ARM GICv4.1 - Multi-instance support for Xilinx and PLIC interrupt controllers - CPU-Hotplug support for PLIC - The obligatory new driver for X1000 TCU - Enhancements, cleanups and fixes all over the place" * tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) unicore32: Replace setup_irq() by request_irq() sh: Replace setup_irq() by request_irq() hexagon: Replace setup_irq() by request_irq() c6x: Replace setup_irq() by request_irq() alpha: Replace setup_irq() by request_irq() irqchip/gic-v4.1: Eagerly vmap vPEs irqchip/gic-v4.1: Add VSGI property setup irqchip/gic-v4.1: Add VSGI allocation/teardown irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks irqchip/gic-v4.1: Add initial SGI configuration irqchip/gic-v4.1: Plumb skeletal VSGI irqchip irqchip/stm32: Retrigger both in eoi and unmask callbacks irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain irqchip/xilinx: Do not call irq_set_default_host() irqchip/xilinx: Enable generic irq multi handler irqchip/xilinx: Fill error code when irq domain registration fails irqchip/xilinx: Add support for multiple instances ... 
Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Treewide:

    - Cleanup of setup_irq() which is not longer required because the
      memory allocator is available early.

      Most cleanup changes come through the various maintainer trees, so
      the final removal of setup_irq() is postponed towards the end of
      the merge window.

  Core:

    - Protection against unsafe invocation of interrupt handlers and
      unsafe interrupt injection including a fixup of the offending
      PCI/AER error injection mechanism.

      Invoking interrupt handlers from arbitrary contexts, i.e. outside
      of an actual interrupt, can cause inconsistent state on the
      fragile x86 interrupt affinity changing hardware trainwreck.

  Drivers:

    - Second wave of support for the new ARM GICv4.1

    - Multi-instance support for Xilinx and PLIC interrupt controllers

    - CPU-Hotplug support for PLIC

    - The obligatory new driver for X1000 TCU

    - Enhancements, cleanups and fixes all over the place"

* tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  unicore32: Replace setup_irq() by request_irq()
  sh: Replace setup_irq() by request_irq()
  hexagon: Replace setup_irq() by request_irq()
  c6x: Replace setup_irq() by request_irq()
  alpha: Replace setup_irq() by request_irq()
  irqchip/gic-v4.1: Eagerly vmap vPEs
  irqchip/gic-v4.1: Add VSGI property setup
  irqchip/gic-v4.1: Add VSGI allocation/teardown
  irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
  irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
  irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
  irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
  irqchip/gic-v4.1: Add initial SGI configuration
  irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
  irqchip/stm32: Retrigger both in eoi and unmask callbacks
  irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain
  irqchip/xilinx: Do not call irq_set_default_host()
  irqchip/xilinx: Enable generic irq multi handler
  irqchip/xilinx: Fill error code when irq domain registration fails
  irqchip/xilinx: Add support for multiple instances
  ...
Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core 2020-03-30T20:59:52+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-03-30T20:59:52+00:00 59838093be51ee9447f6ad05483d697b6fa0368d Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1. Nothing huge in here, just lots of little firmware core changes and use of new apis, a libfs fix, a debugfs api change, and some driver core deferred probe rework. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits) Revert "driver core: Set fw_devlink to "permissive" behavior by default" driver core: Set fw_devlink to "permissive" behavior by default driver core: Replace open-coded list_last_entry() driver core: Read atomic counter once in driver_probe_done() libfs: fix infoleak in simple_attr_read() driver core: Add device links from fwnode only for the primary device platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Input: icn8505 - Switch to firmware_request_platform for retreiving the fw Input: silead - Switch to firmware_request_platform for retreiving the fw selftests: firmware: Add firmware_request_platform tests test_firmware: add support for firmware_request_platform firmware: Add new platform fallback mechanism and firmware_request_platform() Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking" drivers: base: power: wakeup.c: Use built-in RCU list checking component: allow missing unbind callback debugfs: remove return value of debugfs_create_file_size() debugfs: Check module state before warning in {full/open}_proxy_open() firmware: fix a double abort case with fw_load_sysfs_fallback arch_topology: Fix putting invalid cpu clk ... 
Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.7-rc1.

  Nothing huge in here, just lots of little firmware core changes and
  use of new apis, a libfs fix, a debugfs api change, and some driver
  core deferred probe rework.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
  Revert "driver core: Set fw_devlink to "permissive" behavior by default"
  driver core: Set fw_devlink to "permissive" behavior by default
  driver core: Replace open-coded list_last_entry()
  driver core: Read atomic counter once in driver_probe_done()
  libfs: fix infoleak in simple_attr_read()
  driver core: Add device links from fwnode only for the primary device
  platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  Input: silead - Switch to firmware_request_platform for retreiving the fw
  selftests: firmware: Add firmware_request_platform tests
  test_firmware: add support for firmware_request_platform
  firmware: Add new platform fallback mechanism and firmware_request_platform()
  Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
  drivers: base: power: wakeup.c: Use built-in RCU list checking
  component: allow missing unbind callback
  debugfs: remove return value of debugfs_create_file_size()
  debugfs: Check module state before warning in {full/open}_proxy_open()
  firmware: fix a double abort case with fw_load_sysfs_fallback
  arch_topology: Fix putting invalid cpu clk
  ...
pinctrl: qcom: use scm_call to route GPIO irq to Apps 2020-03-27T23:36:18+00:00 Ajay Kishore akisho@codeaurora.org 2020-03-27T22:32:08+00:00 13bec8d49bdf10aab4e1570ef42417f6bfbb6126 For IPQ806x targets, TZ protects the registers that are used to configure the routing of interrupts to a target processor. To resolve this, this patch uses scm call to route GPIO interrupts to application processor. Also the scm call interface is changed. Signed-off-by: Ajay Kishore <akisho@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
For IPQ806x targets, TZ protects the registers that are used to
configure the routing of interrupts to a target processor.
To resolve this, this patch uses scm call to route GPIO interrupts
to application processor. Also the scm call interface is changed.

Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sprd: Add pin high impedance mode support 2020-03-27T21:08:46+00:00 Linhua Xu linhua.xu@unisoc.com 2020-03-25T08:25:28+00:00 1592c4b9935fa8a3b7c297955bb872a357e5a3b6 For Spreadtrum pin controller, it will be the high impedance mode if disable input and output mode for a pin. Thus add PIN_CONFIG_BIAS_HIGH_IMPEDANCE configuration to support it. Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/3bdac4c2673b54c940e511f3fa569ee33b87b8d5.1585124562.git.baolin.wang7@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
For Spreadtrum pin controller, it will be the high impedance
mode if disable input and output mode for a pin. Thus add
PIN_CONFIG_BIAS_HIGH_IMPEDANCE configuration to support it.

Signed-off-by: Linhua Xu <linhua.xu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/3bdac4c2673b54c940e511f3fa569ee33b87b8d5.1585124562.git.baolin.wang7@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sprd: Use the correct pin output configuration 2020-03-27T21:07:10+00:00 Linhua Xu linhua.xu@unisoc.com 2020-03-25T08:25:27+00:00 bb0f472f96fa2bda2c3e412cd84f16b15d992a56 The Spreadtrum pin controller did not supply registers to set high level or low level for output mode, instead we should let the pin controller current configuration drive values on the line. So we should use the PIN_CONFIG_OUTPUT_ENABLE configuration to enable or disable the output mode. [Baolin Wang changes the commit message] Fixes: 41d32cfce1ae ("pinctrl: sprd: Add Spreadtrum pin control driver") Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/8a6f91b49c17beb218e46b23084f59a7c7260f86.1585124562.git.baolin.wang7@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The Spreadtrum pin controller did not supply registers to set high level
or low level for output mode, instead we should let the pin controller
current configuration drive values on the line. So we should use the
PIN_CONFIG_OUTPUT_ENABLE configuration to enable or disable the output
mode.

[Baolin Wang changes the commit message]
Fixes: 41d32cfce1ae ("pinctrl: sprd: Add Spreadtrum pin control driver")
Signed-off-by: Linhua Xu <linhua.xu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/8a6f91b49c17beb218e46b23084f59a7c7260f86.1585124562.git.baolin.wang7@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>