Pull pin control updates from Linus Walleij:
 "Outside the pinctrl driver and DT bindings we hit some Arm DT files,
  patched by the maintainers.

  Other than that it is business as usual.

  Core changes:

   - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).

  New drivers:

   - Intel Meteor Lake support.

   - Reneasas RZ/V2M and r8a779g0 (R-Car V4H).

   - AXP209 variants AXP221, AXP223 and AXP809.

   - Qualcomm MSM8909, PM8226, PMP8074 and SM6375.

   - Allwinner D1.

  Improvements:

   - Proper pin multiplexing in the AMD driver.

   - Mediatek MT8192 can use generic drive strength and pin bias, then
     fixes on top plus some I2C pin group fixes.

   - Have the Allwinner Sunplus SP7021 use the generic DT schema and
     make interrupts optional.

   - Handle Qualcomm SC7280 ADSP.

   - Handle Qualcomm MSM8916 CAMSS GP clock muxing.

   - High impedance bias on ZynqMP.

   - Serialize StarFive access to MMIO.

   - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO"

* tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits)
  dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints
  pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM
  pinctrl: qcom: sm8250: Fix PDC map
  pinctrl: amd: Fix an unused variable
  dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp
  dt-bindings: pinctrl: mt8186: Add gpio-line-names property
  ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
  pinctrl: amd: Use unicode for debugfs output
  pinctrl: amd: Fix newline declaration in debugfs output
  pinctrl: at91: Fix typo 'the the' in comment
  dt-bindings: pinctrl: st,stm32: Correct 'resets' property name
  pinctrl: mvebu: Missing a blank line after declarations.
  pinctrl: qcom: Add SM6375 TLMM driver
  dt-bindings: pinctrl: Add DT schema for SM6375 TLMM
  dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples
  Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"
  pinctrl: imx93: Add MODULE_DEVICE_TABLE()
  pinctrl: sunxi: Add driver for Allwinner D1
  pinctrl: sunxi: Make some layout parameters dynamic
  pinctrl: sunxi: Refactor register/offset calculation
  ...

Pull x86 platform driver updates from Hans de Goede:

 - Microsoft Surface:
     - SSAM hot unplug support
     - Surface Pro 8 keyboard cover support
     - Tablet mode switch support for Surface Pro 8 and Surface Laptop
       Studio

 - thinkpad_acpi:
     - AMD Automatice Mode Transitions (AMT) support

 - Mellanox:
     - Vulcan chassis COMe NVSwitch management support
     - XH3000 support

 - New generic/shared Intel P2SB (Primary to Sideband) support

 - Lots of small cleanups

 - Various small bugfixes

 - Various new hardware ids / quirks additions

* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
  platform/x86/intel/vsec: Fix wrong type for local status variables
  platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
  platform/x86: pmc_atom: Fix comment typo
  platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
  platform/olpc: Fix uninitialized data in debugfs write
  platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
  platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
  platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
  tools/power/x86/intel-speed-select: Remove unneeded semicolon
  tools/power/x86/intel-speed-select: Fix off by one check
  platform/surface: tabletsw: Fix __le32 integer access
  Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
  Documentation/ABI: mlxreg-io: Fix contact info
  platform/mellanox: mlxreg-io: Add locking for io operations
  platform/x86: mlx-platform: Add COME board revision register
  platform/x86: mlx-platform: Add support for new system XH3000
  platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
  platform/x86: mlx-platform: Add support for systems equipped with two ASICs
  platform/x86: mlx-platform: Add cosmetic changes for alignment
  platform/x86: mlx-platform: Make activation of some drivers conditional
  ...

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...

Pull driver core / kernfs updates from Greg KH:
 "Here is the set of driver core and kernfs changes for 6.0-rc1.

  The "biggest" thing in here is some scalability improvements for
  kernfs for large systems. Other than that, included in here are:

   - arch topology and cache info changes that have been reviewed and
     discussed a lot.

   - potential error path cleanup fixes

   - deferred driver probe cleanups

   - firmware loader cleanups and tweaks

   - documentation updates

   - other small things

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
  docs: embargoed-hardware-issues: fix invalid AMD contact email
  firmware_loader: Replace kmap() with kmap_local_page()
  sysfs docs: ABI: Fix typo in comment
  kobject: fix Kconfig.debug "its" grammar
  kernfs: Fix typo 'the the' in comment
  docs: driver-api: firmware: add driver firmware guidelines. (v3)
  arch_topology: Fix cache attributes detection in the CPU hotplug path
  ACPI: PPTT: Leave the table mapped for the runtime usage
  cacheinfo: Use atomic allocation for percpu cache attributes
  drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
  MAINTAINERS: Change mentions of mpm to olivia
  docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
  docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
  Documentation/process: Add embargoed HW contact for LLVM
  Revert "kernfs: Change kernfs_notify_list to llist."
  ACPI: Remove the unused find_acpi_cpu_cache_topology()
  arch_topology: Warn that topology for nested clusters is not supported
  arch_topology: Add support for parsing sockets in /cpu-map
  arch_topology: Set cluster identifier in each core/thread from /cpu-map
  arch_topology: Limit span of cpu_clustergroup_mask()
  ...

All the many other configs depend on config PINCTRL_MSM, yet for config
PINCTRL_SM8450 we select config PINCTRL_MSM. Make config PINCTRL_SM8450
depend on PINCTRL_MSM to be consistent with the rest.

Signed-off-by: John Garry <john.garry@huawei.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/1658829764-124936-1-git-send-email-john.garry@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Fix the PDC mapping for SM8250, gpio39 is mapped to irq73(not irq37).

Fixes: b41efeed507a("pinctrl: qcom: sm8250: Specify PDC map.")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220803015645.22388-1-lujianhua000@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

`char *output_enable` is no longer used once switching to unicode
output.

Fixes: e8129a076a50 ("pinctrl: amd: Use unicode for debugfs output")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220801144952.141-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull irq updates from Thomas Gleixner:
 "Updates for interrupt core and drivers:

  Core:

   - Fix a few inconsistencies between UP and SMP vs interrupt
     affinities

   - Small updates and cleanups all over the place

  New drivers:

   - LoongArch interrupt controller

   - Renesas RZ/G2L interrupt controller

  Updates:

   - Hotpath optimization for SiFive PLIC

   - Workaround for broken PLIC edge triggered interrupts

   - Simall cleanups and improvements as usual"

* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  irqchip/mmp: Declare init functions in common header file
  irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
  genirq: Use for_each_action_of_desc in actions_show()
  irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
  irqchip: Add LoongArch CPU interrupt controller support
  irqchip: Add Loongson Extended I/O interrupt controller support
  irqchip/loongson-liointc: Add ACPI init support
  irqchip/loongson-pch-msi: Add ACPI init support
  irqchip/loongson-pch-pic: Add ACPI init support
  irqchip: Add Loongson PCH LPC controller support
  LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
  LoongArch: Use ACPI_GENERIC_GSI for gsi handling
  genirq/generic_chip: Export irq_unmap_generic_chip
  ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
  APCI: irq: Add support for multiple GSI domains
  LoongArch: Provisionally add ACPICA data structures
  irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
  irqdomain: Report irq number for NOMAP domains
  irqchip/gic-v3: Fix comment typo
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
  ...

The output is currently split across two lines making it more
difficult to parse unless the newlines are removed between pins
or it's read in by a parser like Libreoffice Calc or Google docs.

To make it easier to follow to the naked eye in a terminal window:
* drop the newline in the middle of pin definitions
* shorten all output using unicode characters
* align all pipe delimitters
* output the same phrase even for disabled functions
  (but with a ∅ character)

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220722220810.28894-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Currently the debugfs output for pinctrl-amd puts the first line
combined with "GPIO bank".  This makes it a little harder to process
as the file needs to be manually corrected for the mistake.

Change this to be a new line character instead.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220722220810.28894-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>