linux-toradex.git/drivers/pinctrl, branch v6.11-rc2

of: remove internal arguments from of_property_for_each_u32()

2024-07-25T11:53:47+00:00

The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

  struct property *prop;
  const __be32 *p;
  u32 val;

  of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

  u32 val;

  of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

 - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
 - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
   checks had to be replicated in a different way, making code more verbose
   and somewhat uglier, but I refrained from a full rework to keep as much
   of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara  # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski  # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre  # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron  # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König  # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner  # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown  # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald  # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman  # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd  # clk
Signed-off-by: Luca Ceresoli 
Acked-by: Lee Jones 
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm)

Merge tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2024-07-21T17:25:59+00:00

Pull pin control updates from Linus Walleij:
 "Some new drivers is the main part, the rest is cleanups and nonurgent
  fixes.

  Nothing much special about this, no core changes this time.

  New drivers:

   - Renesas RZ/V2H(P) SoC

   - NXP Freescale i.MX91 SoC

   - Nuvoton MA35D1 SoC

   - Qualcomm PMC8380, SM4250, SM4250 LPI

  Enhancements:

   - A slew of scoped-based simplifications of of_node_put()"

* tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
  pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
  pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions
  pinctrl: renesas: rzg2l: Clarify OEN read/write support
  dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description
  dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function
  dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties
  pinctrl: freescale: Use scope based of_node_put() cleanups
  pinctrl: equilibrium: Use scope based of_node_put() cleanups
  pinctrl: ti: iodelay: Use scope based of_node_put() cleanups
  pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32
  pinctrl: cy8c95x0: Update cache modification
  pinctrl: cy8c95x0: Use cleanup.h
  pinctrl: renesas: r8a779h0: Remove unneeded separators
  pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function
  pinctrl: renesas: r8a779g0: Remove unneeded separators
  pinctrl: renesas: r8a779h0: Add AVB MII pins and groups
  pinctrl: renesas: r8a779g0: Fix TPU suffixes
  pinctrl: renesas: r8a779g0: Fix TCLK suffixes
  pinctrl: renesas: r8a779g0: FIX PWM suffixes
  pinctrl: renesas: r8a779g0: Fix IRQ suffixes
  ...

Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2024-07-16T00:53:24+00:00

Pull gpio updates from Bartosz Golaszewski:
 "The majority of added lines are two new modules: the GPIO virtual
  consumer module that improves our ability to add automated tests for
  the kernel API and the "sloppy" logic analyzer module that uses the
  GPIO API to implement a coarse-grained debugging tool for useful for
  remote development.

  Other than that we have the usual assortment of various driver
  extensions, improvements to the core GPIO code, DT-bindings and other
  documentation updates as well as an extension to the interrupt
  simulator:

  GPIOLIB core:
   - rework kfifo handling rework in the character device code
   - improve the labeling of GPIOs requested as interrupts and show more
     info on interrupt-only GPIOs in debugfs
   - remove unused APIs
   - unexport interfaces that are only used from the core GPIO code
   - drop the return value from gpiochip_set_desc_names() as it cannot
     fail
   - move a string array definition out of a header and into a specific
     compilation unit
   - convert the last user of gpiochip_get_desc() other than GPIO core
     to using a safer alternative
   - use array_index_nospec() where applicable

  New drivers:
   - add a "virtual GPIO consumer" module that allows requesting GPIOs
     from actual hardware and driving tests of the in-kernel GPIO API
     from user-space over debugfs
   - add a GPIO-based "sloppy" logic analyzer module useful for "first
     glance" debugging on remote boards

  Driver improvements:
   - add support for a new model to gpio-pca953x
   - lock GPIOs as interrupts in gpio-sim when the lines are requested
     as irqs via the simulator domain + some other minor improvements
   - improve error reporting in gpio-syscon
   - convert gpio-ath79 to using dynamic GPIO base and range
   - use pcibios_err_to_errno() for converting PCIBIOS error codes to
     errno vaues in gpio-amd8111 and gpio-rdc321x
   - allow building gpio-brcmstb for the BCM2835 architecture

  DT bindings:
   - convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
   - document new properties for aspeed,gpio, fsl,qoriq-gpio and
     gpio-vf610
   - document new compatibles for pca953x and fsl,qoriq-gpio

  Documentation:
   - document stricter behavior of the GPIO character device uAPI with
     regards to reconfiguring requested line without direction set
   - clarify the effect of the active-low flag on line values and edges
   - remove documentation for the legacy GPIO API in order to stop
     tempting people to use it
   - document the preference for using pread() for reading edge events
     in the sysfs API

  Other:
   - add an extended initializer to the interrupt simulator allowing to
     specify a number of callbacks callers can use to be notified about
     irqs being requested and released"

* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
  gpio: mc33880: Convert comma to semicolon
  gpio: virtuser: actually use the "trimmed" local variable
  dt-bindings: gpio: convert Atmel GPIO to json-schema
  gpio: virtuser: new virtual testing driver for the GPIO API
  dt-bindings: gpio: vf610: Allow gpio-line-names to be set
  gpio: sim: lock GPIOs as interrupts when they are requested
  genirq/irq_sim: add an extended irq_sim initializer
  dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
  gpiolib: unexport gpiochip_get_desc()
  gpio: add sloppy logic analyzer using polling
  Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
  Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
  dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
  gpio: ath79: convert to dynamic GPIO base allocation
  pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
  gpiolib: put gpio_suffixes in a single compilation unit
  Documentation: gpio: Clarify effect of active low flag on line edges
  Documentation: gpio: Clarify effect of active low flag on line values
  gpiolib: Remove data-less gpiochip_add() function
  gpio: sim: use devm_mutex_init()
  ...

Merge tag 'renesas-pinctrl-for-v6.11-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

2024-07-05T10:08:48+00:00

pinctrl: renesas: Updates for v6.11 (take three)

  - Support output enable on RZ/G2L.

Signed-off-by: Linus Walleij

pinctrl: renesas: rzg2l: Support output enable on RZ/G2L

2024-07-04T17:22:03+00:00

On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
signal is selectable to support an Ethernet PHY operating in either MII
or RGMII mode. By default, the signal is configured as an input and MII
mode is supported. The ETH_MODE register can be modified to configure
this signal as an output to support RGMII mode.

As this signal is by default an input, and can optionally be switched to
an output, it maps neatly onto an `output-enable` property in the device
tree.

Signed-off-by: Paul Barker 
Acked-by: Linus Walleij 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/20240625200316.4282-4-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven

pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions

2024-07-04T17:22:03+00:00

The variable naming in the various OEN functions has been confusing. We
were passing the _pin & bit variables from rzg2l_pinctrl_pinconf_get()
and rzg2l_pinctrl_pinconf_set() as the offset & pin argument to the
oen_read() and oen_write() functions. This doesn't make sense, the first
of these isn't actually an offset and the second is not needed for
RZ/V2H but leads to confusion with the bit variable used within these
functions.

To tidy this up, instead pass the _pin variable directly to the
oen_read() and oen_write() functions with consistent naming. Then
rzg3s_read_oen() and rzg3s_write_oen() can use macros to get the port
and pin numbers it needs.

Instead of passing the pin capabilities into oen_read() and oen_write(),
check that the pin supports OEN before calling these functions.

Also, merge rzg3s_oen_is_supported() into rzg3s_pin_to_oen_bit() to give
a single translation function which returns an error if the pin doesn't
support OEN. While we're here, remove an unnecessary branch and clarify
the variable naming. Lastly, check that we are not dealing with a
dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}().

Signed-off-by: Paul Barker 
Acked-by: Linus Walleij 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/20240625200316.4282-3-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven

pinctrl: renesas: rzg2l: Clarify OEN read/write support

2024-07-04T17:22:03+00:00

We currently support OEN read/write for the RZ/G3S SoC but not the
RZ/G2L SoC family (consisting of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L &
RZ/Five). The appropriate functions are renamed to clarify this and to
match the callback names.

We should also only set the oen_read and oen_write function pointers for
the devices which support these operations. This requires us to check
that these function pointers are valid before calling them.

Signed-off-by: Paul Barker 
Acked-by: Linus Walleij 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/20240625200316.4282-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven

pinctrl: freescale: Use scope based of_node_put() cleanups

2024-07-03T12:40:38+00:00

Use scope based of_node_put() cleanup to simplify code.

Signed-off-by: Peng Fan 
Reviewed-by: Jonathan Cameron 
Link: https://lore.kernel.org/20240627131721.678727-4-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij

pinctrl: equilibrium: Use scope based of_node_put() cleanups

2024-07-03T12:40:38+00:00

Use scope based of_node_put() cleanup to simplify code.

Signed-off-by: Peng Fan 
Reviewed-by: Jonathan Cameron 
Link: https://lore.kernel.org/20240627131721.678727-3-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij

pinctrl: ti: iodelay: Use scope based of_node_put() cleanups

2024-07-03T12:40:38+00:00

Use scope based of_node_put() cleanup to simplify code.

Signed-off-by: Peng Fan 
Reviewed-by: Jonathan Cameron 
Link: https://lore.kernel.org/20240627131721.678727-2-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij