The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull pin control updates from Linus Walleij:
 "Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
  RISC-V SoC I've never seen before.

  Core changes:

   - Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
     macro only used in one place

   - Add pinmux_generic_add_pinfunction() helper and use this in a few
     drivers

  New drivers:

   - Amlogic S7, S7D and S6 pin control support

   - Eswin EIC7700 pin control support

   - Qualcomm PMIV0104, PM7550 and Milos pin control support

     Because of unhelpful numbering schemes, the Qualcomm driver now
     needs to start to rely on SoC codenames

   - STM32 HDP pin control support

   - Mediatek MT8189 pin control support

  Improvements:

   - Switch remaining pin control drivers over to the new GPIO set
     callback that provides a return value

   - Support RSVD (reserved) pins in the STM32 driver

   - Move many fixed assignments over to pinctrl_desc definitions

   - Handle multiple TLMM regions in the Qualcomm driver"

* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
  pinctrl: mediatek: Add pinctrl driver for mt8189
  dt-bindings: pinctrl: mediatek: Add support for mt8189
  pinctrl: aspeed-g6: Add PCIe RC PERST pin group
  pinctrl: ingenic: use pinmux_generic_add_pinfunction()
  pinctrl: keembay: use pinmux_generic_add_pinfunction()
  pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
  pinctrl: airoha: use pinmux_generic_add_pinfunction()
  pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
  pinctrl: provide pinmux_generic_add_pinfunction()
  pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
  pinctrl: ma35: use new GPIO line value setter callbacks
  MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
  pinctrl: stm32: Introduce HDP driver
  dt-bindings: pinctrl: stm32: Introduce HDP
  pinctrl: qcom: Add Milos pinctrl driver
  dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
  pinctrl: qcom: spmi: Add PM7550
  dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
  pinctrl: qcom: spmi: Add PMIV0104
  dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
  ...

Pull SoC driver updates from Arnd Bergmann:
 "Changes are all over the place, but very little sticks out as
  noteworthy.

  There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
  I/O chip, along with hooking it up to the pinctrl and clk frameworks.

  The reset controller and memory subsystems have mainly small updates,
  but there are two new reset drivers for the K230 and VC1800B SoCs, and
  new memory driver support for Tegra264.

  The ARM SMCCC and SCMI firmware drivers gain a few more features that
  should help them be supported across more environments. Similarly, the
  SoC specific firmware on Tegra and Qualcomm get minor enhancements and
  chip support.

  In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
  overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
  grow to support more chips, while the Hisilicon, Mediatek and Renesas
  drivers see mostly janitorial fixes"

* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
  bus: del unnecessary init var
  soc: fsl: qe: convert set_multiple() to returning an integer
  pinctrl: rp1: use new GPIO line value setter callbacks
  soc: hisilicon: kunpeng_hccs: Fix incorrect log information
  dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
  dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
  dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
  soc: qcom: socinfo: Add support to retrieve APPSBL build details
  soc: qcom: pmic_glink: fix OF node leak
  soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
  soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
  soc: qcom: socinfo: Add SoC IDs for SM7635 family
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
  firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
  firmware: qcom: scm: initialize tzmem before marking SCM as available
  firmware: qcom: scm: take struct device as argument in SHM bridge enable
  firmware: qcom: scm: remove unused arguments from SHM bridge routines
  soc: qcom: rpmh-rsc: Add RSC version 4 support
  memory: tegra: Add Tegra264 MC and EMC support
  firmware: tegra: bpmp: Fix build failure for tegra264-only config
  ...

Add pinctrl driver support for MediaTek Soc mt8189.

Signed-off-by: Cathy Xu <ot_cathy.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/20250711094513.17073-4-ot_cathy.xu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The PCIe RC PERST uses SSPRST# as PERST#  and enable this pin
to output.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250715034320.2553837-8-jacky_chou@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom SoCs drivers updates for 6.17,
please pull the following:

- Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
  bind them all

* tag 'arm-soc/for-6.17/drivers' of https://github.com/Broadcom/stblinux:
  pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support
  misc: rp1: RaspberryPi RP1 misc driver
  pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  clk: rp1: Add support for clocks provided by RP1
  dt-bindings: clock: Add RaspberryPi RP1 clock bindings

Link: https://lore.kernel.org/r/20250630190216.1518354-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-7-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-6-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Instead of passing individual fields of struct pinfunction to
pinmux_generic_add_function(), use pinmux_generic_add_pinfunction() and
pass the entire structure directly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250709-pinctrl-gpio-pinfuncs-v2-5-b6135149c0d9@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>