linux-toradex.git/drivers/platform/x86/intel_menlow.c, branch v3.14.26

ACPI: Clean up inclusions of ACPI header files

2013-12-07T00:03:14+00:00

Replace direct inclusions of ,  and
, which are incorrect, with 
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, ,  and 
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
 includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that  be included
prior to  so that the acpi_pci_root declarations the
latter depends on are always there.  And  which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
 as appropriate.

Signed-off-by: Lv Zheng 
Cc: Greg Kroah-Hartman 
Cc: Matthew Garrett 
Cc: Tony Luck 
Cc: "H. Peter Anvin" 
Acked-by: Bjorn Helgaas  (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk  (Xen stuff)
Signed-off-by: Rafael J. Wysocki

intel_menlow: convert acpi_get_handle() to acpi_has_method()

2013-09-23T23:37:55+00:00

acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.

It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.

Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/intel_menlow.c in this patch.

Signed-off-by: Zhang Rui 
CC: Matthew Garrett 
Signed-off-by: Rafael J. Wysocki

ACPI: Remove useless type argument of driver .remove() operation

2013-01-25T23:37:24+00:00

The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Jiang Liu 
Acked-by: Toshi Kani 
Acked-by: Yinghai Lu

switch sysfs attr->mode to umode_t

2012-01-04T03:54:55+00:00

Signed-off-by: Al Viro

platform-drivers-x86: intel_menlow: add missing return AE_OK for intel_menlow_register_sensor()

2011-08-05T18:46:12+00:00

Otherwise, the error path will always be executed.

Signed-off-by: Axel Lin 
Signed-off-by: Matthew Garrett

intel_menlow: Add pr_fmt and use pr_

2011-05-27T16:35:49+00:00

Add pr_fmt to prefix the logging messages.
Convert printk to pr_.

Signed-off-by: Joe Perches 
Signed-off-by: Matthew Garrett

intel_menlow: fix memory leaks in error path

2010-08-03T13:48:40+00:00

This patch includes below fixes in error path:
1. fix a memory leak if device_create_file failed in
intel_menlow_add_one_attribute
2. properly free added attributes before return error in
intel_menlow_register_sensor error handler
3. properly call acpi_bus_unregister_driver before return error in
intel_menlow_module_init

Signed-off-by: Axel Lin 
Signed-off-by: Matthew Garrett

device_attributes: add sysfs_attr_init() for dynamic attributes

2010-04-07T15:38:03+00:00

Made necessary by 6992f5334995af474c2b58d010d08bc597f0f2fe ("sysfs: Use
one lockdep class per sysfs attribute").

Prevents further "key xxx not in .data" bug-reports.  Although some
attributes could probably be converted to static ones, this is left for
people having hardware to test.

Found by this semantic patch:

@ init @
type T;
identifier A;
@@

        T {
                ...
                struct device_attribute A;
                ...
        };

@ main extends init @
expression E;
statement S;
identifier err;
T *name;
@@

        ... when != sysfs_attr_init(&name->A.attr);
(
+       sysfs_attr_init(&name->A.attr);
        if (device_create_file(E, &name->A))
                S
|
+       sysfs_attr_init(&name->A.attr);
        err = device_create_file(E, &name->A);
)

While reviewing, I put the initialization to apropriate places.

Signed-off-by: Wolfram Sang 
Cc: Eric W. Biederman 
Cc: Greg KH 
Cc: Benjamin Herrenschmidt 
Cc: Grant Likely 
Cc: Mike Isely 
Cc: Mauro Carvalho Chehab 
Cc: Sujith Thomas 
Cc: Matthew Garrett 
Cc: Len Brown 
Cc: Krzysztof Helt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

ACPICA: Add post-order callback to acpi_walk_namespace

2009-11-25T02:31:10+00:00

The existing interface only has a pre-order callback. This change
adds an additional parameter for a post-order callback which will
be more useful for bus scans. ACPICA BZ 779.

Also update the external calls to acpi_walk_namespace.

http://www.acpica.org/bugzilla/show_bug.cgi?id=779

Signed-off-by: Lin Ming 
Signed-off-by: Bob Moore 
Signed-off-by: Len Brown