Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake.

Fixes: 77b0ddb42add ("soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Passing pm_runtime_put() return value to the callers is not particularly
useful.

Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.

Accordingly, update imx_pgc_domain_suspend() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.

This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/15658107.tv2OnDr8pf@rafael.j.wysocki

USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP
flags to USB PHY genpd configuration.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.

An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.

In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.

Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove().

Fixes: 2684ac05a8c4 ("soc: imx: add i.MX8M blk-ctrl driver")
Cc: stable@kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

On i.MX8MM, the GPUMIX, GPU2D, and GPU3D blocks share a common reset
domain. Due to this hardware limitation, powering off/on GPU2D or GPU3D
also triggers a reset of the GPUMIX domain, including its ADB400 port.
However, the ADB400 interface must always be placed into power‑down mode
before being reset.

Currently the GPUMIX and GPU2D/3D power domains rely on runtime PM to
handle dependency ordering. In some corner cases, the GPUMIX power off
sequence is skipped, leaving the ADB400 port active when GPU2D/3D reset.
This causes the GPUMIX ADB400 port to be reset while still active,
leading to unpredictable bus behavior and GPU hangs.

To avoid this, refine the power‑domain control logic so that the GPUMIX
ADB400 port is explicitly powered down and powered up as part of the GPU
power domain on/off sequence. This ensures proper ordering and prevents
incorrect ADB400 reset.

Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset
and clock enable bits, but is ungated and reset together with the VPUs.
So we can't reset G1 or G2 separately, it may led to the system hang.
Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data.
Let imx8mq_vpu_power_notifier() do really vpu reset.

Fixes: 608d7c325e85 ("soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl")
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

of_get_child_by_name() returns a node pointer with refcount incremented.
Use the __free() attribute to manage the pgc_node reference, ensuring
automatic of_node_put() cleanup when pgc_node goes out of scope.

This eliminates the need for explicit error handling paths and avoids
reference count leaks.

Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

of_get_child_by_name() returns a node pointer with refcount incremented, we
should use of_node_put() on it when not needed anymore. Add the missing
of_node_put() to avoid refcount leak.

Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

When using MMIO with regmap, fast_io is implied. No need to set it
again.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250813161517.4746-15-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>