linux-toradex.git/drivers/pnp/interface.c, branch v4.8-rc6

PNP: replace strnicmp with strncasecmp

2014-10-14T00:18:25+00:00

The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.

Signed-off-by: Rasmus Villemoes 
Cc: "Rafael J. Wysocki" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

PNP: convert bus code to use dev_groups

2013-10-17T01:36:02+00:00

The dev_attrs field of struct bus_type is going away soon, dev_groups
should be used instead.  This converts the PNP bus code to use the
correct field.

Acked-by: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PNP: Simplify setting of resources

2013-01-03T12:10:52+00:00

This patch factors out the setting of PNP resources into one function which is
then reused for all PNP resource types.  This makes the code more concise and
avoids duplication.  The parameters "type" and "flags" are not used at the
moment but may be used by follow-up patches.  Placeholders for these patches
can be found in the comment lines that contain the "TBD" marker.

As the code does not make any changes to the ABI, no regressions are expected.

NB: While at it, support for bus type resources is added.

Signed-off-by: Witold Szczeponik 
Reviewed-by: Bjorn Helgaas 
Signed-off-by: Rafael J. Wysocki

PNPACPI: add bus number support

2010-03-15T00:08:38+00:00

Add support for bus number resources.  This is for bridges with a range of
bus numbers behind them.  Previously, PNP ignored bus number resources.

Signed-off-by: Bjorn Helgaas 
Signed-off-by: Len Brown

PNPACPI: add window support

2010-03-15T00:08:37+00:00

Add support for resource windows.  This is for bridge resources, i.e.,
regions where a bridge forwards transactions from the primary to the
secondary side.  This does not add support for *setting* windows via
the /proc interface.

Signed-off-by: Bjorn Helgaas 
Signed-off-by: Len Brown

tree-wide: convert open calls to remove spaces to skip_spaces() lib function

2009-12-15T16:53:32+00:00

Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.

It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
   text    data     bss     dec     hex filename
  64688     584     592   65864   10148 (TOTALS-BEFORE)
  64641     584     592   65817   10119 (TOTALS-AFTER)

Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".

Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
    drivers/leds/led-class.c
    drivers/leds/ledtrig-timer.c
    drivers/video/output.c

@@
expression str;
@@

( // ignore skip_spaces cases
while (*str &&  isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)

Signed-off-by: André Goddard Rosa 
Cc: Julia Lawall 
Cc: Martin Schwidefsky 
Cc: Jeff Dike 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Richard Purdie 
Cc: Neil Brown 
Cc: Kyle McMartin 
Cc: Henrique de Moraes Holschuh 
Cc: David Howells 
Cc: 
Cc: Samuel Ortiz 
Cc: Patrick McHardy 
Cc: Takashi Iwai 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers: remove duplicated #include

2008-11-04T16:18:19+00:00

Signed-off-by: Jianjun Kong 
Signed-off-by: Linus Torvalds

PNP: create device attributes via default device attributes

2008-10-16T16:24:51+00:00

This creates the attributes before the uevent is sent.

Signed-off-by: Drew Moseley 
Acked-by: Kay Sievers 
Signed-off-by: Greg Kroah-Hartman

PNP: convert resource options to single linked list

2008-07-16T21:27:07+00:00

ISAPNP, PNPBIOS, and ACPI describe the "possible resource settings" of
a device, i.e., the possibilities an OS bus driver has when it assigns
I/O port, MMIO, and other resources to the device.

PNP used to maintain this "possible resource setting" information in
one independent option structure and a list of dependent option
structures for each device.  Each of these option structures had lists
of I/O, memory, IRQ, and DMA resources, for example:

  dev
    independent options
      ind-io0  -> ind-io1  ...
      ind-mem0 -> ind-mem1 ...
      ...
    dependent option set 0
      dep0-io0  -> dep0-io1  ...
      dep0-mem0 -> dep0-mem1 ...
      ...
    dependent option set 1
      dep1-io0  -> dep1-io1  ...
      dep1-mem0 -> dep1-mem1 ...
      ...
    ...

This data structure was designed for ISAPNP, where the OS configures
device resource settings by writing directly to configuration
registers.  The OS can write the registers in arbitrary order much
like it writes PCI BARs.

However, for PNPBIOS and ACPI devices, the OS uses firmware interfaces
that perform device configuration, and it is important to pass the
desired settings to those interfaces in the correct order.  The OS
learns the correct order by using firmware interfaces that return the
"current resource settings" and "possible resource settings," but the
option structures above doesn't store the ordering information.

This patch replaces the independent and dependent lists with a single
list of options.  For example, a device might have possible resource
settings like this:

  dev
    options
      ind-io0 -> dep0-io0 -> dep1->io0 -> ind-io1 ...

All the possible settings are in the same list, in the order they
come from the firmware "possible resource settings" list.  Each entry
is tagged with an independent/dependent flag.  Dependent entries also
have a "set number" and an optional priority value.  All dependent
entries must be assigned from the same set.  For example, the OS can
use all the entries from dependent set 0, or all the entries from
dependent set 1, but it cannot mix entries from set 0 with entries
from set 1.

Prior to this patch PNP didn't keep track of the order of this list,
and it assigned all independent options first, then all dependent
ones.  Using the example above, that resulted in a "desired
configuration" list like this:

  ind->io0 -> ind->io1 -> depN-io0 ...

instead of the list the firmware expects, which looks like this:

  ind->io0 -> depN-io0 -> ind-io1 ...

Signed-off-by: Bjorn Helgaas 
Signed-off-by: Andi Kleen 
Acked-by: Rene Herman 
Signed-off-by: Len Brown

PNP: support optional IRQ resources

2008-07-16T21:27:07+00:00

This patch adds an IORESOURCE_IRQ_OPTIONAL flag for use when
assigning resources to a device.  If the flag is set and we are
unable to assign an IRQ to the device, we can leave the IRQ
disabled but allow the overall resource allocation to succeed.

Some devices request an IRQ, but can run without an IRQ
(possibly with degraded performance).  This flag lets us run
the device without the IRQ instead of just leaving the
device disabled.

This is a reimplementation of this previous change by Rene
Herman :
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b73a223661ed137c5d3d2635f954382e94f5a43

I reimplemented this for two reasons:
    - to prepare for converting all resource options into a single linked
      list, as opposed to the per-resource-type lists we have now, and
    - to preserve the order and number of resource options.

In PNPBIOS and ACPI, we configure a device by giving firmware a
list of resource assignments.  It is important that this list
has exactly the same number of resources, in the same order,
as the "template" list we got from the firmware in the first
place.

The problem of a sound card MPU401 being left disabled for want of
an IRQ was reported by Uwe Bugla .

Signed-off-by: Bjorn Helgaas 
Signed-off-by: Andi Kleen 
Acked-by: Rene Herman 
Signed-off-by: Len Brown