linux-toradex.git/drivers/power/ds2760_battery.c, branch v3.0.78

ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery

2011-05-20T15:25:10+00:00

Fix rated capacity of the HP iPAQ hx4700 3.7V 1800mAh (359113-001) battery. For this battery the value of the rated capacity EEPROM register at 0x32 is 7; thus rated_capacities[7] = 1800.

Signed-off-by: Paul Parsons 
Signed-off-by: Anton Vorontsov

ds2760_battery: Fix indexing of the 4 active full EEPROM registers

2011-05-20T15:25:09+00:00

Fix indexing of the 4 active full EEPROM registers. The indexing was out by 1, accessing the EEPROM registers at 0x23 to 0x26 instead of 0x22 to 0x25.

Signed-off-by: Paul Parsons 
Signed-off-by: Anton Vorontsov

Merge git://git.infradead.org/battery-2.6

2011-01-14T17:25:59+00:00

* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...

workqueue: convert cancel_rearming_delayed_work[queue]() users to cancel_delayed_work_sync()

2010-12-15T09:56:11+00:00

cancel_rearming_delayed_work[queue]() has been superceded by
cancel_delayed_work_sync() quite some time ago.  Convert all the
in-kernel users.  The conversions are completely equivalent and
trivial.

Signed-off-by: Tejun Heo 
Acked-by: "David S. Miller" 
Acked-by: Greg Kroah-Hartman 
Acked-by: Evgeniy Polyakov 
Cc: Jeff Garzik 
Cc: Benjamin Herrenschmidt 
Cc: Mauro Carvalho Chehab 
Cc: netdev@vger.kernel.org
Cc: Anton Vorontsov 
Cc: David Woodhouse 
Cc: "J. Bruce Fields" 
Cc: Neil Brown 
Cc: Alex Elder 
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: Andrew Morton 
Cc: netfilter-devel@vger.kernel.org
Cc: Trond Myklebust 
Cc: linux-nfs@vger.kernel.org

ds2760_battery: Fix calculation of time_to_empty_now

2010-11-18T13:56:15+00:00

A check against division by zero was modified in commit b0525b48.
Since this change time_to_empty_now is always reported as zero
while the battery is discharging and as a negative value while
the battery is charging. This is because current is negative while
the battery is discharging.

Fix the check introduced by commit b0525b48 so that time_to_empty_now
is reported correctly during discharge and as zero while charging.

Signed-off-by: Sven Neumann 
Acked-by: Daniel Mack 
Cc: stable@kernel.org [2.6.32..2.6.36]
Signed-off-by: Anton Vorontsov

ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()

2010-09-28T11:16:23+00:00

Signed-off-by: Axel Lin 
Signed-off-by: Anton Vorontsov

ds2760_battery: Make charge_now and charge_full writeable

2010-05-19T08:14:42+00:00

For userspace tools and daemons, it might be necessary to adjust
the charge_now and charge_full properties of the ds2760 battery monitor,
for example for unavoidable corrections due to aging batteries.

Signed-off-by: Daniel Mack 
Cc: Matt Reimer 
Cc: Evgeniy Polyakov 
Cc: Tejun Heo 
Cc: David Woodhouse 
Cc: Alexey Starikovskiy 
Cc: Len Brown 
Cc: Mark Brown 
Signed-off-by: Anton Vorontsov

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

ds2760_battery: Fix integer overflow for time_to_empty_now

2009-09-04T16:26:40+00:00

On the device we're currently developing, battery sizes of ~2.8Ah and
current flow of ~600mA are typical.

With that values, the life_sec computation overflows due to the
multiplication by 3600.

Signed-off-by: Daniel Mack 
Cc: Szabolcs Gyurko 
Cc: Matt Reimer 
Signed-off-by: Anton Vorontsov

ds2760_battery: implement set_charged() feature

2009-07-30T13:49:16+00:00

The ds2760's internal current meter is not reliable enough as it has an
inacurracy of around ~15%. Without any correction for that error, the
current accumulator is couting up all the time, even though the battery
is already fully charged and hence destroys the static information. The
longer it is connected, the worse is the aberration.

Fortunately, this can be corrected by the DS2760_CURRENT_OFFSET_BIAS
register. Using the external power_supply_set_battery_charged()
function, this register is now gauging the measurement.

A delayed work is used to debounce flaky GPIO signals and to let the
current value settle. Also see Maxim's application note AN4188.

Signed-off-by: Daniel Mack 
Cc: Szabolcs Gyurko 
Cc: Matt Reimer 
Cc: Anton Vorontsov 
Signed-off-by: Anton Vorontsov