linux-toradex.git/drivers/power/isp1704_charger.c, branch v3.14.2

isp1704_charger: remove useless check in isp1704_charger_probe()

2014-01-25T11:24:15+00:00

Neither devm_usb_get_phy_by_phandle() nor devm_usb_get_phy() can
return a NULL result, so remove the useless !isp->phy check.

Signed-off-by: Wei Yongjun

isp1704_charger: Add DT support

2013-12-24T02:34:58+00:00

This patch introduces device tree support to the isp1704 charger driver.
Adding support involved moving the handling of the enable GPIO from board
code into the driver.

Signed-off-by: Sebastian Reichel 
Signed-off-by: Anton Vorontsov

isp1704_charger: Fix driver to work with changes introduced in v3.5

2013-10-22T20:57:16+00:00

* omap musb driver does not report USB_EVENT_ENUMERATED event anymore
* omap musb driver reporting USB_EVENT_VBUS when charger is connected
* read last event from phy->last_event (instead from ulpi register)
* do not call wall charger detection more times

Signed-off-by: Pali Rohár 
Signed-off-by: Anton Vorontsov

isp1704_charger: Use devm_kzalloc()

2013-04-01T06:25:40+00:00

Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han 
Signed-off-by: Anton Vorontsov

power: remove use of __devexit

2012-11-28T19:43:22+00:00

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton 
Cc: Anton Vorontsov 
Cc: David Woodhouse 
Acked-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

power: remove use of __devinit

2012-11-28T19:43:22+00:00

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Anton Vorontsov 
Cc: David Woodhouse 
Acked-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

power: remove use of __devexit_p

2012-11-28T19:43:22+00:00

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Anton Vorontsov 
Cc: David Woodhouse 
Acked-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

usb: phy: fix return value check of usb_get_phy

2012-07-02T07:40:49+00:00

usb_get_phy will return -ENODEV if it's not able to find the phy. Hence
fixed all the callers of usb_get_phy to check for this error condition
instead of relying on a non-zero value as success condition.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

usb: otg: support for multiple transceivers by a single controller

2012-06-25T11:05:35+00:00

Add a linked list for keeping multiple PHY instances with different
types so that we can have separate USB2 and USB3 PHYs on one single
board. _get_phy_ has been changed so that the controller gets
the transceiver by type. _remove_phy_ has been added to let the phy
be removed from the phy list.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

usb: otg: utils: rename function name in OTG utils

2012-06-25T11:04:26+00:00

_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is
replaced with usb_add_phy to make it similar to other usb standard
function names like usb_add_hcd.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi