linux-toradex.git/drivers/power/pda_power.c, branch v3.15-rc1

usb: power: pda_power: check against CONFIG_USB_PHY

2013-03-18T09:18:05+00:00

CONFIG_USB_OTG_UTILS will be removed very
soon, so we should check CONFIG_USB_PHY
instead.

Signed-off-by: Felipe Balbi

pda_power: Remove ac_draw_failed goto and label

2012-09-21T23:50:11+00:00

A previous patch added the ac_draw_failed goto and label to
pda_power_probe(). The goto would be invoked after a failed call to
regulator_get().

However the way ac_draw is used - always after a check for NULL - suggests
that a failed call to regulator_get() was not fatal.

This patch removes the ac_draw_failed goto and label, partly reverting the
previous patch.

This patch also removes the assignment of an error code to ret after a
failed call to regulator_get(), since the error code is now never used.

Signed-off-by: Paul Parsons 
Cc: Philipp Zabel 
Signed-off-by: Anton Vorontsov

pda_power: Fix ac_draw usage before it being set

2012-09-20T21:27:34+00:00

When I reboot my iPAQ hx4700 in its cradle, the battery will not begin
to charge even though the AC supply is connected. Charging will start
only after the PDA power driver is tickled by some other power event,
such as reseating the iPAQ in its cradle or connecting the USB cable.

The problem lies in pda_power_probe(), where ac_draw is used by the call
to update_charger() before being set by the call to regulator_get().

Moving the regulator_get() call to before the update_charger() call
fixes the problem.

Signed-off-by: Paul Parsons 
Cc: Philipp Zabel 
Signed-off-by: Anton Vorontsov

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

2012-08-01T02:07:42+00:00

Pull random subsystem patches from Ted Ts'o:
 "This patch series contains a major revamp of how we collect entropy
  from interrupts for /dev/random and /dev/urandom.

  The goal is to addresses weaknesses discussed in the paper "Mining
  your Ps and Qs: Detection of Widespread Weak Keys in Network Devices",
  by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J.  Alex Halderman,
  which will be published in the Proceedings of the 21st Usenix Security
  Symposium, August 2012.  (See https://factorable.net for more
  information and an extended version of the paper.)"

Fix up trivial conflicts due to nearby changes in
drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c}

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits)
  random: mix in architectural randomness in extract_buf()
  dmi: Feed DMI table to /dev/random driver
  random: Add comment to random_initialize()
  random: final removal of IRQF_SAMPLE_RANDOM
  um: remove IRQF_SAMPLE_RANDOM which is now a no-op
  sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op
  board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op
  isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out
  uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op
  drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op
  xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op
  n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op
  i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op
  input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op
  mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op
  ...

Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6

2012-08-01T01:08:25+00:00

Pull battery updates from Anton Vorontsov:
 "The tag contains just a few battery-related changes for v3.6.  It's is
  all pretty straightforward, except one thing.

  One of our patches added thermal support for power supply class, but
  thermal/ subsystem changed under our feet.  We (well, Stephen, that
  is) caught the issue and it was decided[1] that I'd just delay the
  battery pull request, and then will fix it up by merging upstream back
  into battery tree at the specific commit.

  That's not all though: another[2] small fixup for thermal subsystem
  was needed to get rid of a warning in power supply subsystem (the
  warning was not drivers/power's "fault", the thermal registration
  function just needed a proper const annotation, which is also done by
  a small commit on top of the merge.

  So, to sum this up:
   - The 'master' branch of the battery tree was in the -next tree for
     weeks, was never rebased, altered etc.  It should be all OK;
   - Although, for-v3.6 tag contains the 'master' branch + merge + the
     warning fix.

  [1] http://lkml.org/lkml/2012/6/19/23
  [2] http://lkml.org/lkml/2012/6/18/28"

* tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits)
  thermal: Constify 'type' argument for the registration routine
  olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries
  olpc-battery: Add VOLTAGE_MAX_DESIGN property
  charger-manager: Fix build break related to EXTCON
  lp8727_charger: Move header file into platform_data directory
  power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT
  bq27x00_battery: Add support for BQ27425 chip
  charger-manager: Set current limit of regulator for over current protection
  charger-manager: Use EXTCON Subsystem to detect charger cables for charging
  test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties
  test_power: Add support for USB AC source
  gpio-charger: Use cansleep version of gpio_set_value
  bq27x00_battery: Add support for power average and health properties
  sbs-battery: Don't trigger false supply_changed event
  twl4030_charger: Allow charger to control the regulator that feeds it
  twl4030_charger: Add backup-battery charging
  twl4030_charger: Fix some typos
  max17042_battery: Support CHARGE_COUNTER power supply attribute
  smb347-charger: Add constant charge and current properties
  power_supply: Add constant charge_current and charge_voltage properties
  ...

pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op

2012-07-19T14:38:48+00:00

With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a
no-op; interrupt randomness is now collected unconditionally in a very
low-overhead fashion; see commit 775f4b297b.  The IRQF_SAMPLE_RANDOM
flag was scheduled to be removed in 2009 on the
feature-removal-schedule, so this patch is preparation for the final
removal of this flag.

Signed-off-by: "Theodore Ts'o" 
Acked-by: Anton Vorontsov 
Cc: David Woodhouse

usb: phy: fix return value check of usb_get_phy

2012-07-02T07:40:49+00:00

usb_get_phy will return -ENODEV if it's not able to find the phy. Hence
fixed all the callers of usb_get_phy to check for this error condition
instead of relying on a non-zero value as success condition.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

usb: otg: support for multiple transceivers by a single controller

2012-06-25T11:05:35+00:00

Add a linked list for keeping multiple PHY instances with different
types so that we can have separate USB2 and USB3 PHYs on one single
board. _get_phy_ has been changed so that the controller gets
the transceiver by type. _remove_phy_ has been added to let the phy
be removed from the phy list.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

usb: otg: utils: rename function name in OTG utils

2012-06-25T11:04:26+00:00

_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is
replaced with usb_add_phy to make it similar to other usb standard
function names like usb_add_hcd.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

pda_power: Complain if regulator operations fail

2012-06-18T03:19:59+00:00

Rather than silently ignoring errors from the regulator enable and disable
add a WARN_ON() - it's probably pretty important if we're not getting
power, though it should be vanishingly unlikely in production.

Signed-off-by: Mark Brown 
Signed-off-by: Anton Vorontsov