linux-toradex.git/drivers/power/reset/Makefile, branch v4.9.2 Linux kernel for Apalis and Colibri modules Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-08-01T22:36:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-08-01T22:36:01+00:00 43a0a98aa8da71583f84b84fd72e265c24d4c5f8 Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ... 
Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...
power: reset: add reboot mode driver 2016-07-06T15:16:27+00:00 Andy Yan andy.yan@rock-chips.com 2016-07-06T13:27:26+00:00 4fcd504edbf7c793325511c2df8dcd083958e28a This driver parses the reboot commands like "reboot bootloader" and "reboot recovery" to get a boot mode described in the device tree , then call the write interfae to store the boot mode in some place like special register or sram, which can be read by the bootloader after system reboot, then the bootloader can take different action according to the mode stored. This is commonly used on Android based devices, in order to reboot the device into fastboot or recovery mode. Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
This driver parses the reboot commands like "reboot bootloader"
and "reboot recovery" to get a boot mode described in the
device tree , then call the write interfae to store the boot
mode in some place like special register or sram, which can
be read by the bootloader after system reboot, then the bootloader
can take different action according to the mode stored.

This is commonly used on Android based devices, in order to
reboot the device into fastboot or recovery mode.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: Introduce Broadcom kona reset driver 2016-06-06T23:17:33+00:00 Chris Brand chris.brand@broadcom.com 2016-05-11T21:36:17+00:00 783cb948d73b46aa336f0f0beb64789a0db35434 This driver supports reset on both BCM21664 and BCM23550. Code is being moved from arch/arm/mach-bcm/board_bcm21664.c Signed-off-by: Chris Brand <chris.brand@broadcom.com> Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 
This driver supports reset on both BCM21664 and BCM23550.
Code is being moved from arch/arm/mach-bcm/board_bcm21664.c

Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
power: reset: at91-shdwc: add new shutdown controller driver 2016-04-10T15:17:38+00:00 Nicolas Ferre nicolas.ferre@atmel.com 2016-03-16T13:19:50+00:00 f80cb488439879df6ae3ba32a5dc4e0892fcd3ff Sama5d2 SoC has a completely new shutdown controller with new features and register layout. It thus makes sense to add a new driver for this new peripheral. This driver is Device Tree only and handles events from the wake-up pin and the RTC. As the register layout may change in the future, so some values are encoded in a configuration structure. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
Sama5d2 SoC has a completely new shutdown controller with new features and
register layout. It thus makes sense to add a new driver for this new
peripheral.

This driver is Device Tree only and handles events from the wake-up pin and
the RTC.
As the register layout may change in the future, so some values are encoded
in a configuration structure.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power/reset: zx: Register restart handler 2015-07-24T15:29:17+00:00 Jun Nie jun.nie@linaro.org 2015-07-15T03:25:58+00:00 dd9f1486ae207cd947416f1bdc461edc4880f2df Register with kernel restart handler instead of setting arm_pm_restart directly. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
Register with kernel restart handler instead of setting arm_pm_restart
directly.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: Add generic SYSCON register mapped poweroff. 2015-04-06T16:49:48+00:00 Moritz Fischer moritz.fischer@ettus.com 2015-03-12T00:37:18+00:00 8a577608ba4a3cab1d74025cea382e40544ab9cd Add a generic SYSCON register mapped poweroff mechanism. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
Add a generic SYSCON register mapped poweroff mechanism.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power/reset: Remove sun6i reboot driver 2015-01-25T21:13:07+00:00 Guenter Roeck linux@roeck-us.net 2015-01-25T20:30:42+00:00 b2b3a8b934e649d0f0659584f2186602dbb391b5 sun6i restart is now handled by its watchdog driver directly, so this driver is no longer needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
sun6i restart is now handled by its watchdog driver directly,
so this driver is no longer needed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: Add reset driver for R-Mobile platforms 2015-01-21T15:32:05+00:00 Geert Uytterhoeven geert+renesas@glider.be 2014-12-04T15:33:21+00:00 fa0f8d670085745711da1fde727996d587a3a0d4 Add a reset driver for Renesas R-Mobile and SH-Mobile SoCs. It registers a restart handler to trigger a soft power-on reset through the R-Mobile System Controller. The priority of this restart handler is 192, to allow a watchdog driver to use priority 128. Note that we do not use syscon-reboot, as the HPB (Peripheral Bus Bridge) semaphore should be acquired on systems where both the ARM and SH core are in use. The driver can be extended later to support this, when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sebastian Reichel <sre@kernel.org> 
Add a reset driver for Renesas R-Mobile and SH-Mobile SoCs. It registers
a restart handler to trigger a soft power-on reset through the R-Mobile
System Controller.
The priority of this restart handler is 192, to allow a watchdog driver
to use priority 128.

Note that we do not use syscon-reboot, as the HPB (Peripheral Bus
Bridge) semaphore should be acquired on systems where both the ARM and
SH core are in use. The driver can be extended later to support this,
when needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power: reset: imx-snvs-poweroff: add power off driver for i.mx6 2014-11-23T06:57:11+00:00 Robin Gong b38343@freescale.com 2014-11-12T08:20:38+00:00 3db47dc0ae4d370ec3c86fc357608132ca695c27 This driver register pm_power_off with snvs power off function. If your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use other pin to do, please disable the driver in dts, otherwise, your pm_power_off maybe overwrote by this driver. Signed-off-by: Robin Gong <b38343@freescale.com> Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
This driver register pm_power_off with snvs power off function. If
your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use
other pin to do, please disable the driver in dts, otherwise, your
pm_power_off maybe overwrote by this driver.

Signed-off-by: Robin Gong <b38343@freescale.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Merge tag 'for-v3.18' of git://git.infradead.org/battery-2.6 2014-10-15T04:56:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-15T04:56:23+00:00 50fa86172bec2769979b5eb0cd1a244391ae4bb0 Pull power supply and reset updates from Sebastian Reichel: - Initial support for the following chips * max77836 (charger) * max14577 (charger) * bq27742 (battery gauge) * ltc2952 (poweroff) * stih416 (restart) * syscon-reboot (restart) * gpio-restart (restart) - cleanup of power supply core - misc fixes in power supply and reset drivers * tag 'for-v3.18' of git://git.infradead.org/battery-2.6: (48 commits) power: ab8500_fg: Fix build warning Documentation: charger: max14577: Update the date of introducing ABI power: reset: corrections for simple syscon reboot driver Documentation: power: reset: Add documentation for generic SYSCON reboot driver power: reset: Add generic SYSCON register mapped reset bq27x00_battery: Fix flag reading for bq27742 power: reset: use restart_notifier mechanism for msm-poweroff power: Add simple gpio-restart driver power: reset: st: Provide DT bindings for ST's Power Reset driver power: reset: Add restart functionality for STiH41x platforms power: charger-manager: Fix NULL pointer exception with missing cm-fuel-gauge power: max14577: Fix circular config SYSFS dependency power: gpio-charger: do not use gpio value directly power: max8925: Use of_get_child_by_name power: max8925: Fix NULL ptr dereference on memory allocation failure bq27x00_battery: Add support to bq27742 Documentation: charger: max14577: Document exported sysfs entry devicetree: mfd: max14577: Add device tree bindings document power: max17040: Add ID for MAX77836 Fuel Gauge block charger: max14577: Configure battery-dependent settings from DTS and sysfs ... Conflicts: drivers/power/reset/Kconfig drivers/power/reset/Makefile 
Pull power supply and reset updates from Sebastian Reichel:
 - Initial support for the following chips
   * max77836 (charger)
   * max14577 (charger)
   * bq27742 (battery gauge)
   * ltc2952 (poweroff)
   * stih416 (restart)
   * syscon-reboot (restart)
   * gpio-restart (restart)
 - cleanup of power supply core
 - misc fixes in power supply and reset drivers

* tag 'for-v3.18' of git://git.infradead.org/battery-2.6: (48 commits)
  power: ab8500_fg: Fix build warning
  Documentation: charger: max14577: Update the date of introducing ABI
  power: reset: corrections for simple syscon reboot driver
  Documentation: power: reset: Add documentation for generic SYSCON reboot driver
  power: reset: Add generic SYSCON register mapped reset
  bq27x00_battery: Fix flag reading for bq27742
  power: reset: use restart_notifier mechanism for msm-poweroff
  power: Add simple gpio-restart driver
  power: reset: st: Provide DT bindings for ST's Power Reset driver
  power: reset: Add restart functionality for STiH41x platforms
  power: charger-manager: Fix NULL pointer exception with missing cm-fuel-gauge
  power: max14577: Fix circular config SYSFS dependency
  power: gpio-charger: do not use gpio value directly
  power: max8925: Use of_get_child_by_name
  power: max8925: Fix NULL ptr dereference on memory allocation failure
  bq27x00_battery: Add support to bq27742
  Documentation: charger: max14577: Document exported sysfs entry
  devicetree: mfd: max14577: Add device tree bindings document
  power: max17040: Add ID for MAX77836 Fuel Gauge block
  charger: max14577: Configure battery-dependent settings from DTS and sysfs
  ...

Conflicts:
	drivers/power/reset/Kconfig
	drivers/power/reset/Makefile