linux-toradex.git/drivers/power/reset, branch v4.19-rc8

treewide: convert ISO_8859-1 text comments to utf-8

2018-08-24T01:48:43+00:00

Almost all files in the kernel are either plain text or UTF-8 encoded.  A
couple however are ISO_8859-1, usually just a few characters in a C
comments, for historic reasons.

This converts them all to UTF-8 for consistency.

Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann 
Acked-by: Simon Horman 			[IPVS portion]
Acked-by: Jonathan Cameron 	[IIO]
Acked-by: Michael Ellerman 			[powerpc]
Acked-by: Rob Herring 
Cc: Joe Perches 
Cc: Arnd Bergmann 
Cc: Samuel Ortiz 
Cc: "David S. Miller" 
Cc: Rob Herring 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2018-08-22T01:06:27+00:00

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Merge branch 'psy-fixes' into psy-next

2018-08-16T20:19:22+00:00

Signed-off-by: Sebastian Reichel

headers: separate linux/mod_devicetable.h from linux/platform_device.h

2018-07-07T15:52:26+00:00

At over 4000 #includes,  is the 9th most
#included header file in the Linux kernel.  It does not need
, so drop that header and explicitly add
 to source files that need it.

   4146 #include 

After this patch, there are 225 files that use ,
for a reduction of around 3900 times that 
does not have to be read & parsed.

    225 #include 

This patch was build-tested on 20 different arch-es.

It also makes these drivers SubmitChecklist#1 compliant.

Signed-off-by: Randy Dunlap 
Reported-by: kbuild test robot  # drivers/media/platform/vimc/
Reported-by: kbuild test robot  # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman

power: gemini-poweroff: Avoid more spurious poweroffs

2018-07-06T14:34:01+00:00

Even after the previous fix I have experienced more spurious
poweroffs on the gemini SoC. After this fix it finally seems
to go away.

Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Linus Walleij 
Signed-off-by: Sebastian Reichel

power: vexpress: fix corruption in notifier registration

2018-07-06T14:23:45+00:00

Vexpress platforms provide two different restart handlers: SYS_REBOOT
that restart the entire system, while DB_RESET only restarts the
daughter board containing the CPU. DB_RESET is overridden by SYS_REBOOT
if it exists.

notifier_chain_register used in register_restart_handler by design
relies on notifiers to be registered once only, however vexpress restart
notifier can get registered twice. When this happen it corrupts list
of notifiers, as result some notifiers can be not called on proper
event, traverse on list can be cycled forever, and second unregister
can access already freed memory.

So far, since this was the only restart handler in the system, no issue
was observed even if the same notifier was registered twice. However
commit 6c5c0d48b686 ("watchdog: sp805: add restart handler") added
support for SP805 restart handlers and since the system under test
contains two vexpress restart and two SP805 watchdog instances, it was
observed that during the boot traversing the restart handler list looped
forever as there's a cycle in that list resulting in boot hang.

This patch fixes the issues by ensuring that the notifier is installed
only once.

Cc: Sebastian Reichel 
Signed-off-by: Sudeep Holla 
Fixes: 46c99ac66222 ("power/reset: vexpress: Register with kernel restart handler")
Signed-off-by: Sebastian Reichel

power: reset: qcom-pon: Add Qcom PON driver

2018-07-06T13:53:58+00:00

Add support Qualcomm PM8xxx PON which is responsible for reboot
mode support.

Co-developed-by: Bjorn Andersson 
Signed-off-by: Bjorn Andersson 
Signed-off-by: Vinod Koul 
Signed-off-by: Sebastian Reichel

power: reset: zx-reboot: put device node in zx_reboot_probe()

2018-06-28T12:20:38+00:00

zx_reboot_probe() increments refcnt of zx296702-pcu device node by
of_find_compatible_node() and leaves it undecremented on both
successful and error paths.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Reviewed-by: Nicholas Mc Guire 
Signed-off-by: Sebastian Reichel

gpio-poweroff: Use gpiod_set_value_cansleep

2018-04-25T21:05:59+00:00

The power-off call is done in a context that must be able to sleep, so
use gpiod_set_value_cansleep instead of the atomic gpiod_set_value call.

This fixes a kernel warning at shutdown when the gpio is controlled
through an IO expander for example.

Signed-off-by: Mike Looijmans 
Signed-off-by: Sebastian Reichel

power: reset: at91-reset: Switch from the pr_() to the dev_() logging functions

2018-03-19T19:51:17+00:00

Use dev_info() instead of pr_info().

Signed-off-by: Ladislav Michl 
Acked-by: Nicolas Ferre 
Signed-off-by: Sebastian Reichel