Pull power supply and reset updates from Sebastian Reichel:
  "Power-supply core:
   - documentation fixes

  power-supply drivers:
   - add BD71828 charger driver
   - add Richtek RT9756 driver
   - max77705: add adaptive input current support
   - max77705: add support for multiple devices
   - misc small fixes

  reset drivers:
   - add spacemit-p1 poweroff/reboot driver"

* tag 'for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  Revert "power: supply: qcom_battmgr: support disabling charge control"
  Documentation: power: rt9756: Document exported sysfs entries
  power: supply: rt9756: Add Richtek RT9756 smart cap divider charger
  dt-bindings: power: supply: Add Richtek RT9756 smart cap divider charger
  driver: reset: spacemit-p1: add driver for poweroff/reboot
  power: supply: apm_power: only unset own apm_get_power_status
  power: supply: use ktime_divns() to avoid 64-bit division
  docs: power: clean up power_supply_class.rst
  power: supply: qcom_battmgr: support disabling charge control
  power: supply: qcom_battmgr: clamp charge control thresholds
  power: supply: wm831x: Check wm831x_set_bits() return value
  power: supply: rt9467: Prevent using uninitialized local variable in rt9467_set_value_from_ranges()
  power: supply: rt9467: Return error on failure in rt9467_set_value_from_ranges()
  power: supply: max17040: Check iio_read_channel_processed() return code
  power: supply: cw2015: Check devm_delayed_work_autocancel() return code
  power: supply: rt5033_charger: Fix device node reference leaks
  power: supply: max77705: Fix potential IRQ chip conflict when probing two devices
  power: supply: max77705_charger: implement aicl feature
  MAINTAINERS: Add entry for BD71828 charger
  power: supply: Add bd718(15/28/78) charger driver

Add support for RT9756 smart cap divider charger.

The RT9759 is a high efficiency and high charge current charger. The
maximum charge current is up to 8A. It integrates a dual-phase charge
pump core with ADC monitoring.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/f682812069b6be2138bfdae2ff9a9c84994d5b64.1761894605.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add charger driver for ROHM BD718(15/28/78) PMIC charger block.
It is a stripped down version of the driver here:
https://lore.kernel.org/lkml/dbd97c1b0d715aa35a8b4d79741e433d97c562aa.1637061794.git.matti.vaittinen@fi.rohmeurope.com/

For the ease of review and to do a step-by-step approach remove all the
coloumb counter related stuff and do not sneak in BD71827 support. That
also avoids non-trivial rebasing of the above series.

Changes besides that:
Replace the custom property by a standard one and do not use megaohms
for the current sense resistor.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20250918-bd71828-charger-v5-2-851164839c28@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add support for the battery charger for pf1550 PMIC.

Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-5-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - introduce adc-battery-helper for capacity estimation based on
     simple ADC readings of battery voltage and current
   - add new properties for battery internal resistance and state of
     health

  Power-supply drivers:
   - ug3105_battery: convert to adc-battery-helper
   - intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
   - rt9467-charger: add voltage and current ADC support
   - sbs-charger: support multiple instances
   - qcom_battmgr:
       - add charge control support
       - add support for state of health and internal resistance
   - max77705_charger:
       - big driver cleanup
       - add support for setting charge current
   - misc minor fixes and cleanups"

* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
  power: supply: qcom_battmgr: handle charging state change notifications
  power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
  power: supply: max77705_charger: rework interrupts
  power: supply: max77705_charger: add writable properties
  power: supply: max77705_charger: return error when config fails
  power: supply: max77705_charger: use regfields for config registers
  power: supply: max77705_charger: refactoring: rename charger to chg
  mfd: max77705: max77705_charger: move active discharge setting to mfd parent
  power: supply: max77976_charger: fix constant current reporting
  power: supply: qcom_battmgr: Add charge control support
  dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
  power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
  power: supply: qcom_battmgr: Add state_of_health property
  power: supply: qcom_battmgr: Add resistance power supply property
  power: supply: core: Add state_of_health power supply property
  power: supply: core: Add resistance power supply property
  power: supply: rx51: remove redundant condition checks
  dt-bindings: power: supply: bq24190: document charge enable pin
  dt-bindings: power: supply: bq27xxx: document optional interrupt
  power: supply: intel_dc_ti_battery: Drop no longer relevant comment
  ...

Add support for the charger function of the BQ257XX. The device is
capable of charging batteries with a layout of 1 to 4 cells in
series.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250904160530.66178-4-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

Intel has 2 completely different "Dollar Cove" PMICs for its Bay Trail /
Cherry Trail SoCs. One is made by X-Powers and is called the AXP288.

The AXP288's builtin charger and fuel-gauge functions are already
supported by the axp288_charger / axp288_fuel_gauge drivers.

The other "Dollar Cove" PMIC is made by TI and does not have any clear TI
denomination, its MFD driver calls it the "Intel Dollar Cove TI PMIC".

The Intel Dollar Cove TI PMIC comes with a coulomb-counters with limited
functionality which is intended to work together with an always on
micro-controller monitoring it for fuel-gauge functionality.

Most devices with the Dollar Cove TI PMIC have full-featured fuel-gauge
functionality exposed through ACPI with the information coming from either
the embedded-controller or a separate full-featured fuel-gauge IC.

But some designs lack this, add a battery-monitoring driver using the
PMIC's coulomb-counter combined with the adc-battery-helper for capacity
estimation for these designs.

Register definitions were taken from kernel/drivers/platform/x86/dc_ti_cc.c
from the Acer A1-840 Android kernel source-code archive named:
"App. Guide_Acer_20151221_A_A.zip"
which is distributed by Acer from the Acer A1-840 support page:
https://www.acer.com/us-en/support/product-support/A1-840/downloads

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-6-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The TI PMIC used on some Intel Bay/Cherry Trail systems has some builtin
fuel-gauge functionality which just like the UG3105 fuel-gauge is not
a full featured autonomous fuel-gauge.

These fuel-gauges offer accurate current and voltage measurements but
their coulomb-counters are intended to work together with an always on
micro-controller monitoring the fuel-gauge.

Add an adc-battery-helper offering open-circuit-voltage (ocv) and through
that capacity estimation for devices where such limited functionality
fuel-gauges are exposed directly to Linux.

This is a copy of the existing UG3105 estimating code, generalized so that
it can be re-used in other drivers.

The next commit will replace the UG3105 driver's version of this code with
using the adc-battery-helper.

The API has been designed for easy integration into existing power-supply
drivers. For example this functionality might also be a useful addition
to the generic-adc-battery driver.

The requirement of needing the adc_battery_helper struct to be the first
member of a battery driver's data struct is not ideal. This is a compromise
which is necessary to allow directly using the helper's get_property(),
external_power_changed() and suspend()/resume() functions as power-supply /
suspend-resume callbacks.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-2-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Prepare to add smb5 support by making variables and the file name more
generic. Also take the opportunity to remove the "_charger" suffix since
smb2 always refers to a charger.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250619-smb2-smb5-support-v1-4-ac5dec51b6e1@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The MAX8971 is a compact, high-frequency, high-efficiency switch-mode
charger for a one-cell lithium-ion (Li+) battery.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250430055114.11469-3-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>