linux-toradex.git/drivers/power, branch PD13.0.0alpha Linux kernel for Apalis and Colibri modules ENGR00174829-2 power: max8903_charger: fix build warrning. 2012-02-20T05:21:04+00:00 Zhang Jiejing jiejing.zhang@freescale.com 2012-02-20T05:05:20+00:00 25d284df3e005d3b318aae5d3181eb2147992d68 Fix below warrning message: drivers/power/max8903_charger.c:218: warning: 'gpio' may be used uninitialized in this function Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> 
Fix below warrning message:
drivers/power/max8903_charger.c:218:
warning: 'gpio' may be used uninitialized in this function

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
ENGR00174121-1 power: max8903 add support for dcm always high. 2012-02-14T07:18:56+00:00 Zhang Jiejing jiejing.zhang@freescale.com 2012-02-09T09:08:32+00:00 59444728ea3e1dae78c343c6f38531b9e09205f8 add this to support MX6Q_SABRESD board hardware design. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> 
add this to support MX6Q_SABRESD board hardware design.

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
ENGR00141391-2 PMIC: porting da9053 to i.mx platform 2012-01-09T11:53:52+00:00 Zhou Jingyu b02241@freescale.com 2011-03-02T08:28:25+00:00 e46c868419024af419283854a62a2ea525a33304 Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com> 
Fix da9053 backlight Kconfig error
porting da9052 regulator driver

Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Acked-by: Lily Zhang <r58066@freescale.com>
ENGR00141391-1 PMIC: Add DA9053 source code from Dialog 2012-01-09T11:53:51+00:00 Zhou Jingyu b02241@freescale.com 2011-03-02T07:36:28+00:00 3b91b5ac920ba4e716afb8618ee10d6fb7711852 Add DA9053 original source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com> 
Add DA9053 original source code

Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Acked-by: Lily Zhang <r58066@freescale.com>
drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal 2011-11-11T17:36:32+00:00 Clifton Barnes cabarnes@indesign-llc.com 2011-11-02T20:39:55+00:00 b97cdd64caeac76928c0bac6a844743fa2431200 commit 0e053fcbbbc4d945247cb32cad2767b483cb65f8 upstream. Fixes the deadlock when inserting and removing the ds2780. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 0e053fcbbbc4d945247cb32cad2767b483cb65f8 upstream.

Fixes the deadlock when inserting and removing the ds2780.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/power/ds2780_battery.c: create central point for calling w1 interface 2011-11-11T17:36:32+00:00 Clifton Barnes cabarnes@indesign-llc.com 2011-11-02T20:39:50+00:00 24e53017e03e9b70765cd244c5304cee4e3ef38b commit 853eee72f74f449797f0500ea19fc1bf497428d8 upstream. Simply creates one point to call the w1 interface. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 853eee72f74f449797f0500ea19fc1bf497428d8 upstream.

Simply creates one point to call the w1 interface.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge git://git.infradead.org/battery-2.6 2011-05-27T17:12:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-05-27T17:12:35+00:00 ea0ca3a843babd50c22dfbb5cf2d9a14df821b2b * git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger 
* git://git.infradead.org/battery-2.6:
  PXA: Use dev_pm_ops in z2_battery
  ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery
  ds2760_battery: Fix indexing of the 4 active full EEPROM registers
  power: Make test_power driver more dynamic.
  bq27x00_battery: Name of cycle count property
  max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)
  ARM: RX-51: Enable isp1704 power on/off
  isp1704_charger: Allow board specific powering routine
  gpio-charger: Add gpio_charger_resume
  power_supply: Add driver for MAX8903 charger
w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC support 2011-05-27T00:12:38+00:00 Clifton Barnes cabarnes@indesign-llc.com 2011-05-26T23:26:04+00:00 275ac74629c4d8ec430d7edecb16d936f46a47c5 Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC. It was suggested to combine this functionality with the current ds2782 driver. Unfortunately, I'm unable to commit the time to refactoring this driver to that extent and I don't have a platform with the ds2782 part to validate that there are no regression issues by adding this functionality. [akpm@linux-foundation.org: use min_t()] Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC.

It was suggested to combine this functionality with the current ds2782
driver.  Unfortunately, I'm unable to commit the time to refactoring this
driver to that extent and I don't have a platform with the ds2782 part to
validate that there are no regression issues by adding this functionality.

[akpm@linux-foundation.org: use min_t()]
Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
power_supply: Use max8925 platform_data from cell 2011-05-26T17:45:32+00:00 Haojian Zhuang haojian.zhuang@marvell.com 2011-04-18T14:04:08+00:00 2402ca5e300db0d88fce9e0b3a5218863c71b694 Avoid to get platform_data from parent device. Get it from mfd cell device instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Avoid to get platform_data from parent device. Get it from mfd cell
device instead.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
PXA: Use dev_pm_ops in z2_battery 2011-05-20T15:25:11+00:00 Marek Vasut marek.vasut@gmail.com 2011-04-10T23:40:13+00:00 906649de0eacde7a643b5a0750de6207441ad54f Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> 
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>