linux-toradex.git/drivers/rapidio, branch v3.11

rapidio: fix use after free in rio_unregister_scan()

2013-07-31T21:41:02+00:00

We're freeing the list iterator so we can't move to the next entry.
Since there is only one matching mport_id, we can just break after
finding it.

Signed-off-by: Dan Carpenter 
Reviewed-by: Ryan Mallon 
Acked-by: Alexandre Bounine 
Cc: Matt Porter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-07-13T21:52:21+00:00

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove 
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...

rapidio: change endpoint device name format

2013-07-03T23:08:05+00:00

Change endpoint device name format to use a component tag value instead of
device destination ID.

RapidIO specification defines a component tag to be a unique identifier
for devices in a network.  RapidIO switches already use component tag as
part of their device name and also use it for device identification when
processing error management event notifications.

Forming an endpoint's device name using its component tag instead of
destination ID allows to keep sysfs device directories unchanged in case
if a routing process dynamically changes endpoint's destination ID as a
result of route optimization.

This change should not affect any existing users because a valid device
destination ID always should be obtained by reading "destid" attribute and
not by parsing device name.

This patch also removes switchid member from struct rio_switch because it
simply duplicates the component tag and does not have other use than in
device name generation.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add udev notification

2013-07-03T23:08:05+00:00

Add RapidIO-specific modalias generation to enable udev notifications
about RapidIO-specific events.

The RapidIO modalias string format is shown below:

"rapidio:vNNNNdNNNNavNNNNadNNNN"

Where:
v  - Device Vendor ID (16 bit),
d  - Device ID (16 bit),
av - Assembly Vendor ID (16 bit),
ad - Assembly ID (16 bit),

as they are reported in corresponding Capability Registers (CARs)
of each RapidIO device.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: add modular build option for the subsystem core

2013-07-03T23:08:05+00:00

Add a configuration option to build RapidIO subsystem core code as a
loadable kernel module.  Currently this option is available only for
x86-based platforms, with the additional patch for PowerPC planned to be
provided later.

This patch replaces kernel command line parameter "riohdid=" with its
module-specific analog "rapidio.hdid=".

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio/tsi721: convert to modular mport driver

2013-07-03T23:08:04+00:00

This patch adds an option to build device driver for Tsi721 PCIe-to-SRIO
bridge device as a kernel module.

Currently this module cannot be unloaded because the existing RapidIO
subsystem code does not support dynamic removal of local RapidIO
controllers (TODO).

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: update enumerator registration mechanism

2013-07-03T23:08:04+00:00

Update enumeration/discovery method registration mechanism to allow
loading enumeration/discovery methods before all mports are registered.

Existing statically linked RapidIO subsystem expects that all available
RapidIO mport devices are initialized and registered before the
enumeration/discovery method is registered.  Switching to loadable mport
device drivers creates situation when mport device driver can be loaded
after enumeration/discovery method is attached (e.g., loadable mport
driver in a system with statically linked RapidIO core and enumerator).
This also will happen in a system with hot-pluggable RapidIO controllers.

To remove the dependency on the initialization/registration order this
patch introduces enumeration/discovery registration mechanism that
supports arbitrary registration order of mports and enumerator/discovery
methods.

The following registration rules are implemented:
- only one enumeration/discovery method can be registered for given mport ID
  (including RIO_MPORT_ANY);
- when new enumeration/discovery methods tries to attach to the registered mport
  device, method with matching mport ID will replace a default method previously
  registered for given mport (if any);
- enumeration/discovery method with target ID=RIO_MPORT_ANY will be attached
  only to mports that do not have another enumerator attached to them;
- when new mport device is registered with RapidIO subsystem, registration
  routine searches for the enumeration/discovery method with the best matching
  mport ID;

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio: convert switch drivers to modules

2013-07-03T23:08:04+00:00

Rework RapidIO switch drivers to add an option to build them as loadable
kernel modules.

This patch removes RapidIO-specific vmlinux section and converts switch
drivers to be compatible with LDM driver registration method.  To simplify
registration of device-specific callback routines this patch introduces
rio_switch_ops data structure.  The sw_sysfs() callback is removed from
the list of device-specific operations because under the new structure its
functions can be handled by switch driver's probe() and remove() routines.

If a specific switch device driver is not loaded the RapidIO subsystem
core will use default standard-based operations to configure a switch.
Because the current implementation of RapidIO enumeration/discovery method
relies on availability of device-specific operations for error management,
switch device drivers must be loaded before the RapidIO
enumeration/discovery starts.

This patch also moves several common routines from enumeration/discovery
module into the RapidIO core code to make switch-specific operations
accessible to all components of RapidIO subsystem.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Cc: Andre van Herk 
Cc: Micha Nelissen 
Cc: Stef van Os 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rapidio/rio-scan.c: make functions static

2013-07-03T23:08:04+00:00

sparse warnings:

drivers/rapidio/rio-scan.c:1143:5: sparse: symbol 'rio_enum_mport' was not declared. Should it be static?
drivers/rapidio/rio-scan.c:1246:5: sparse: symbol 'rio_disc_mport' was not declared. Should it be static?

Signed-off-by: Fengguang Wu 
Cc: "Bounine, Alexandre" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rapidio/switches: remove tsi500 driver

2013-07-03T23:08:04+00:00

Remove the driver for Tsi500 Parallel RapidIO switch because this device
has not been available for several years.  Since the first introduction of
Tsi500, the parallel RapidIO interface was replaced by the serial RapidIO
(sRIO) and therefore there is no value in keeping this driver.

Signed-off-by: Alexandre Bounine 
Cc: Matt Porter 
Cc: Li Yang 
Cc: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds