Fixes a typo in Kconfig, HWWON -> HWMON

Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-kconfig-v1-1-b0c5459ed7a0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull gpio updates from Bartosz Golaszewski:
 "There are two new drivers and some changes to GPIO core but mostly
  just GPIO driver updates across a wide array of files, adding support
  for new models as well as various refactoring changes. Nothing
  controversial and everything has spent a good measure of time in
  linux-next.

  GPIOLIB core:
   - shrink the GPIO bus driver stub code
   - rework software node support for "undefined" software nodes
   - provide and use devm_fwnode_gpiod_get_optional()
   - only compile the OF quirk for MT2701 when needed

  New drivers:
   - add the GPIO driver for ROHM bd72720
   - add the gpio-line-mux driver providing 1-to-many mapping for a
     single real GPIO

  Driver changes:
   - refactor gpio-pca9570: use lock guard, add missing headers, use
     devres consistently
   - add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
     driver along with some prerequisite refactoring
   - use device_get_match_data() where applicable and save some lines
   - add support for more models to gpio-cadence
   - add the compatible property to reset-gpio and use it in shared GPIO
     management
   - drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
   - add support for a new variant to gpio-pca953x
   - extend build coverage with COMPILE_TEST for more drivers
   - constify configfs structures in gpio-sim and gpio-virtuser
   - add support for the K3 SoC to gpio-spacemit
   - implement the missing .get_direction() callback in gpio-max77620
   - add support for Tegra264 to gpio-tegra186
   - drop unneeded MODULE_ALIAS() from gpio-menz127

  DT bindings:
   - document support for the opencores GPIO controller in gpio-mmio
   - document new variants for gpio-pca953x

  Documentation:
   - extensively describe interrupt source detection for gpio-pca953x
     and add more models to the list of supported variants"

* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
  gpio: tegra186: Add support for Tegra264
  dt-bindings: gpio: Add Tegra264 support
  gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
  gpio: max77620: Implement .get_direction() callback
  gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
  dt-bindings: gpio: aspeed,sgpio: Support ast2700
  gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
  gpio: aspeed-sgpio: Create llops to handle hardware access
  gpio: aspeed-sgpio: Remove unused bank name field
  gpio: aspeed-sgpio: Change the macro to support deferred probe
  regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
  gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
  gpio: mmio: Add compatible for opencores GPIO
  dt-bindings: gpio-mmio: Correct opencores GPIO
  gpio: pca9570: use lock guards
  gpio: pca9570: Don't use "proxy" headers
  gpio: pca9570: Use devm_mutex_init() for mutex initialization
  MAINTAINERS: Add ROHM BD72720 PMIC
  power: supply: bd71828-power: Support ROHM BD72720
  power: supply: bd71828: Support wider register addresses
  ...

ROHM BD72720 is a power management IC which integrates 10 buck and 11 LDO
regulators. This PMIC has plenty of commonalities with the BD71828 and
BD71879.

The BD72720 does also have similar 'run-level'-concept as the BD71828 had.
It allows controlling the regulator's 'en masse', although only BUCK1
and LDO1 can utilize this in BD72720. Similar to BD71828, this 'en
masse' -control is not supported by this driver.

Support the voltage and enable/disable state control for the BD72720.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/88b82128648516d9dbb173044042f2a7a5dfdf1c.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

Merge series from Andreas Kemnade <andreas@kemnade.info>:

Add a driver for the TPS65185 regulator which provides the
comparatively high voltages needed for electronic paper displays.

Datasheet for the TPS65185 is at https://www.ti.com/lit/gpn/tps65185

To simplify things, include the hwmon part directly which is only
one temperature sensor and there are no other functions besides regulators
in this chip.

Add a driver for the TPS65185 regulator. Implement handling of the various
gpio pins. Because the PWRUP (=enable) pin functionality can be achieved
by just using two bits instead, just ensure that it is set to a stable
value.
Implement the pair of symmetric LDOs as a single regulator because they
share a single voltage set register. As the VCOM regulator sits behind that
machinery, just define that one as a supply.
For simplicity, just add the temperature sensor (depending on external NTC)
directly.

There is a mechanism to measure some kick-back voltage during a defined EPD
operation, to calibrate the VCOM voltage setting and store that
non-volatile in the chip to be the power up default setup. That is not
implemented yet in the driver, but that also means that there is a
non-factory default value in these registers after power-up.

Tested-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260102-tps65185-submit-v3-2-23bda35772f2@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series from cy_huang@richtek.com:

This patch series add rt8092 regulator support.

RT8092 is a 3MHz 4A efficiency step-down converter with I2C control
interface. It can support wide output range from 0.7 to 5.5V, based on
the voltage bank selection.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/d2293c513f396f86e54f9b806fd0195b57db7aae.1766125676.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for the Maxim Integrated MAX77675 PMIC regulator.

The MAX77675 is a compact, highly efficient SIMO (Single Inductor Multiple Output)
power management IC that provides four programmable buck-boost switching regulators
with only one inductor. It supports up to 700mA total output current and operates
from a single-cell Li-ion battery.

An integrated power-up sequencer and I2C interface allow flexible startup
configuration and runtime control.

Signed-off-by: Joan Na <joan.na@analog.com>
Link: https://patch.msgid.link/20251207032907.4850-3-joan.na@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:

Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.

Some drivers already have const everywhere, so container_of_const can be
directly used. In few other drivers, the final pointer can be constified
that way.

Merge series from Andreas Kemnade <andreas@kemnade.info>:

Add a driver for the FP9931/JD9930 regulator which provides the
comparatively high voltages needed for electronic paper displays.

Datasheet for the FP9931 is at
https://www.fitipower.com/dl/file/flXa6hIchVeu0W3K

Although it is in English, it seems to be only downloadable
from the Chinese part of that website.
For the JD9930 there can be a datasheet found at
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/JD9930_2D00_0.7_2D00_JUN_2D00_2019.pdf

To simplify things, include the hwmon part directly which is only
one register read and there are not other functions besides
regulators in this chip.