<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/regulator/Makefile, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>regulator: add support for the Nexperia NEX10000UB dual output LCD bias power supply</title>
<updated>2026-09-21T13:28:08+00:00</updated>
<author>
<name>Mark Brown</name>
<email>broonie@kernel.org</email>
</author>
<published>2026-09-21T13:28:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=67d0d03da16df245704922813a51e76e323e967f'/>
<id>67d0d03da16df245704922813a51e76e323e967f</id>
<content type='text'>
Neil Armstrong &lt;neil.armstrong@linaro.org&gt; says:

Document and add regulator support for the Nexperia NEX10000UB dual
output LCD bias power supply which provides programmable positive
and negative output voltages mainly for display panels applications.

The driver supports setting the output voltage from 4V to 6V in
100mV steps for each output via the I2C programming interface and
supports the enable GPIOs for both outputs.

Product datashet can be found online at [1].

[1] https://assets.nexperia.com/documents/data-sheet/NEX10000UB.pdf

Link: https://patch.msgid.link/20260921-topic-sm8x50-nex10000ub-v2-0-eeeaf9b0c913@linaro.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Neil Armstrong &lt;neil.armstrong@linaro.org&gt; says:

Document and add regulator support for the Nexperia NEX10000UB dual
output LCD bias power supply which provides programmable positive
and negative output voltages mainly for display panels applications.

The driver supports setting the output voltage from 4V to 6V in
100mV steps for each output via the I2C programming interface and
supports the enable GPIOs for both outputs.

Product datashet can be found online at [1].

[1] https://assets.nexperia.com/documents/data-sheet/NEX10000UB.pdf

Link: https://patch.msgid.link/20260921-topic-sm8x50-nex10000ub-v2-0-eeeaf9b0c913@linaro.org
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: add regulator driver for the Nexperia NEX10000UB</title>
<updated>2026-09-21T13:28:06+00:00</updated>
<author>
<name>Neil Armstrong</name>
<email>neil.armstrong@linaro.org</email>
</author>
<published>2026-09-21T09:51:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=53bb6f50be851976b726712256f7fd05722a4941'/>
<id>53bb6f50be851976b726712256f7fd05722a4941</id>
<content type='text'>
Add regulator support for the Nexperia NEX10000UB dual output LCD
bias power supply which provides programmable positive and negative
output voltages mainly for display panels applications.

The driver supports setting the output voltage from 4V to 6V in
100mV steps for each output via the I2C programming interface and
supports the enable GPIOs for both outputs.

Product datashet can be found online at [1].

[1] https://assets.nexperia.com/documents/data-sheet/NEX10000UB.pdf

Signed-off-by: Neil Armstrong &lt;neil.armstrong@linaro.org&gt;
Link: https://patch.msgid.link/20260921-topic-sm8x50-nex10000ub-v2-3-eeeaf9b0c913@linaro.org
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add regulator support for the Nexperia NEX10000UB dual output LCD
bias power supply which provides programmable positive and negative
output voltages mainly for display panels applications.

The driver supports setting the output voltage from 4V to 6V in
100mV steps for each output via the I2C programming interface and
supports the enable GPIOs for both outputs.

Product datashet can be found online at [1].

[1] https://assets.nexperia.com/documents/data-sheet/NEX10000UB.pdf

Signed-off-by: Neil Armstrong &lt;neil.armstrong@linaro.org&gt;
Link: https://patch.msgid.link/20260921-topic-sm8x50-nex10000ub-v2-3-eeeaf9b0c913@linaro.org
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: Add MPS MPQ4210 buck-boost regulator driver</title>
<updated>2026-09-10T15:53:11+00:00</updated>
<author>
<name>Tapio Reijonen</name>
<email>tapio.reijonen@vaisala.com</email>
</author>
<published>2026-09-10T08:51:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=61879d561e91c71502fef9f28f26b31e9a5b9fa2'/>
<id>61879d561e91c71502fef9f28f26b31e9a5b9fa2</id>
<content type='text'>
The MPQ4210 is a 40V synchronous four-switch buck-boost controller with
an I2C interface. Add a driver exposing voltage control and enable
control through the regulator interface.

The output voltage is programmed by an 11-bit feedback reference DAC with
a 1mV step, split across REF_LSB[2:0] and REF_MSB[7:0], and is then
scaled by the external feedback divider described in the device tree.
Only 0.3V to 2.047V of that range is specified, so linear_min_sel holds
the driver to it and the lower selectors are not offered. Scaled by the
divider, that floor is not zero: 4.2V on a board with a gain of 14, and
the core narrows regulator-min-microvolt to it.

The same divider ratio applies to the slew rate, so the four reference
slew rates that the Control 1 SR field selects are scaled into a
per-device ramp_delay_table and the field is exposed through
regulator_set_ramp_delay_regmap(). ramp_delay is initialised from the
rate SR is currently programmed for, so the core waits in proportion to
the size of each change; a board that sets regulator-ramp-delay
reprograms SR and the core uses that value instead.

Enabling follows the start-up sequence in the datasheet: commit the
reference with the GO bit, wait 200ms, then set ENPWR. Control 1 bit 2 is
documented as reserved but has to be set before the controller starts up,
so probe sets it. The controller does not respond on the bus while EN is
deasserted, so the enable GPIO is claimed before the first register
access.

Link: https://www.monolithicpower.com/en/mpq4210.html
Signed-off-by: Tapio Reijonen &lt;tapio.reijonen@vaisala.com&gt;
Link: https://patch.msgid.link/20260910-mpq4210-regulator-v1-2-d37e208dfc8d@vaisala.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The MPQ4210 is a 40V synchronous four-switch buck-boost controller with
an I2C interface. Add a driver exposing voltage control and enable
control through the regulator interface.

The output voltage is programmed by an 11-bit feedback reference DAC with
a 1mV step, split across REF_LSB[2:0] and REF_MSB[7:0], and is then
scaled by the external feedback divider described in the device tree.
Only 0.3V to 2.047V of that range is specified, so linear_min_sel holds
the driver to it and the lower selectors are not offered. Scaled by the
divider, that floor is not zero: 4.2V on a board with a gain of 14, and
the core narrows regulator-min-microvolt to it.

The same divider ratio applies to the slew rate, so the four reference
slew rates that the Control 1 SR field selects are scaled into a
per-device ramp_delay_table and the field is exposed through
regulator_set_ramp_delay_regmap(). ramp_delay is initialised from the
rate SR is currently programmed for, so the core waits in proportion to
the size of each change; a board that sets regulator-ramp-delay
reprograms SR and the core uses that value instead.

Enabling follows the start-up sequence in the datasheet: commit the
reference with the GO bit, wait 200ms, then set ENPWR. Control 1 bit 2 is
documented as reserved but has to be set before the controller starts up,
so probe sets it. The controller does not respond on the bus while EN is
deasserted, so the enable GPIO is claimed before the first register
access.

Link: https://www.monolithicpower.com/en/mpq4210.html
Signed-off-by: Tapio Reijonen &lt;tapio.reijonen@vaisala.com&gt;
Link: https://patch.msgid.link/20260910-mpq4210-regulator-v1-2-d37e208dfc8d@vaisala.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: Add regulator driver for Unisoc SC2730 PMIC</title>
<updated>2026-07-03T12:27:19+00:00</updated>
<author>
<name>Otto Pflüger</name>
<email>otto.pflueger@abscue.de</email>
</author>
<published>2026-07-01T15:00:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4c40e28e833d0142352e8294d50dde637c163a76'/>
<id>4c40e28e833d0142352e8294d50dde637c163a76</id>
<content type='text'>
Add a regulator driver for the Spreadtrum/Unisoc SC2730 PMIC, used
e.g. with the UMS512 and UMS9230 SoCs. This version of the driver is
based on a downstream driver provided by Unisoc [1][2] and the existing
SC2731 driver.

[1]: https://github.com/MotorolaMobilityLLC/kernel-sprd/commit/30be0ddfe6b9a877fc9c328fbd2bae84e645eb31
[2]: https://github.com/MotorolaMobilityLLC/kernel-sprd/blob/android-13-release-tla33/drivers/regulator/sc2730-regulator.c

Signed-off-by: Zhongfa Wang &lt;zhongfa.wang@unisoc.com&gt;
[cleanup, adapt to new device tree requirements]
Signed-off-by: Otto Pflüger &lt;otto.pflueger@abscue.de&gt;
Link: https://patch.msgid.link/20260701-sc2730-regulators-v7-2-6e145ce83657@abscue.de
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a regulator driver for the Spreadtrum/Unisoc SC2730 PMIC, used
e.g. with the UMS512 and UMS9230 SoCs. This version of the driver is
based on a downstream driver provided by Unisoc [1][2] and the existing
SC2731 driver.

[1]: https://github.com/MotorolaMobilityLLC/kernel-sprd/commit/30be0ddfe6b9a877fc9c328fbd2bae84e645eb31
[2]: https://github.com/MotorolaMobilityLLC/kernel-sprd/blob/android-13-release-tla33/drivers/regulator/sc2730-regulator.c

Signed-off-by: Zhongfa Wang &lt;zhongfa.wang@unisoc.com&gt;
[cleanup, adapt to new device tree requirements]
Signed-off-by: Otto Pflüger &lt;otto.pflueger@abscue.de&gt;
Link: https://patch.msgid.link/20260701-sc2730-regulators-v7-2-6e145ce83657@abscue.de
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: remove used pcap regulator driver</title>
<updated>2026-05-28T14:52:44+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2026-05-27T19:37:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b282e237ee4c3b0cbab762ef2e9a08a5d4a21b6d'/>
<id>b282e237ee4c3b0cbab762ef2e9a08a5d4a21b6d</id>
<content type='text'>
The platform was removed a few years ago, and the mfd driver
is also gone now, so it is impossible to build or use it.

Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://patch.msgid.link/20260527193837.3436148-1-arnd@kernel.org
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The platform was removed a few years ago, and the mfd driver
is also gone now, so it is impossible to build or use it.

Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://patch.msgid.link/20260527193837.3436148-1-arnd@kernel.org
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: add SGM3804 Dual Output driver</title>
<updated>2026-05-24T22:35:38+00:00</updated>
<author>
<name>KancyJoe</name>
<email>kancy2333@outlook.com</email>
</author>
<published>2026-05-22T13:09:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0c47e1a8cf5d0052745553a0aeb2c8c4ab1b5453'/>
<id>0c47e1a8cf5d0052745553a0aeb2c8c4ab1b5453</id>
<content type='text'>
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.

The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.

Signed-off-by: KancyJoe &lt;kancy2333@outlook.com&gt;
Signed-off-by: Neil Armstrong &lt;neil.armstrong@linaro.org&gt;
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-2-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.

The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.

Signed-off-by: KancyJoe &lt;kancy2333@outlook.com&gt;
Signed-off-by: Neil Armstrong &lt;neil.armstrong@linaro.org&gt;
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-2-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: Add TPS65185</title>
<updated>2026-01-13T12:07:09+00:00</updated>
<author>
<name>Mark Brown</name>
<email>broonie@kernel.org</email>
</author>
<published>2026-01-13T12:07:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f1fcc2689fd8dcb6a23fdf7a4c4c9cfda10329ef'/>
<id>f1fcc2689fd8dcb6a23fdf7a4c4c9cfda10329ef</id>
<content type='text'>
Merge series from Andreas Kemnade &lt;andreas@kemnade.info&gt;:

Add a driver for the TPS65185 regulator which provides the
comparatively high voltages needed for electronic paper displays.

Datasheet for the TPS65185 is at https://www.ti.com/lit/gpn/tps65185

To simplify things, include the hwmon part directly which is only
one temperature sensor and there are no other functions besides regulators
in this chip.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Merge series from Andreas Kemnade &lt;andreas@kemnade.info&gt;:

Add a driver for the TPS65185 regulator which provides the
comparatively high voltages needed for electronic paper displays.

Datasheet for the TPS65185 is at https://www.ti.com/lit/gpn/tps65185

To simplify things, include the hwmon part directly which is only
one temperature sensor and there are no other functions besides regulators
in this chip.
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: Add TPS65185 driver</title>
<updated>2026-01-12T12:28:20+00:00</updated>
<author>
<name>Andreas Kemnade</name>
<email>andreas@kemnade.info</email>
</author>
<published>2026-01-02T10:13:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b0fc1e7701940d12ea2c41f386aa552bc4cc3629'/>
<id>b0fc1e7701940d12ea2c41f386aa552bc4cc3629</id>
<content type='text'>
Add a driver for the TPS65185 regulator. Implement handling of the various
gpio pins. Because the PWRUP (=enable) pin functionality can be achieved
by just using two bits instead, just ensure that it is set to a stable
value.
Implement the pair of symmetric LDOs as a single regulator because they
share a single voltage set register. As the VCOM regulator sits behind that
machinery, just define that one as a supply.
For simplicity, just add the temperature sensor (depending on external NTC)
directly.

There is a mechanism to measure some kick-back voltage during a defined EPD
operation, to calibrate the VCOM voltage setting and store that
non-volatile in the chip to be the power up default setup. That is not
implemented yet in the driver, but that also means that there is a
non-factory default value in these registers after power-up.

Tested-by: Josua Mayer &lt;josua.mayer@jm0.eu&gt;
Signed-off-by: Andreas Kemnade &lt;andreas@kemnade.info&gt;
Link: https://patch.msgid.link/20260102-tps65185-submit-v3-2-23bda35772f2@kemnade.info
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a driver for the TPS65185 regulator. Implement handling of the various
gpio pins. Because the PWRUP (=enable) pin functionality can be achieved
by just using two bits instead, just ensure that it is set to a stable
value.
Implement the pair of symmetric LDOs as a single regulator because they
share a single voltage set register. As the VCOM regulator sits behind that
machinery, just define that one as a supply.
For simplicity, just add the temperature sensor (depending on external NTC)
directly.

There is a mechanism to measure some kick-back voltage during a defined EPD
operation, to calibrate the VCOM voltage setting and store that
non-volatile in the chip to be the power up default setup. That is not
implemented yet in the driver, but that also means that there is a
non-factory default value in these registers after power-up.

Tested-by: Josua Mayer &lt;josua.mayer@jm0.eu&gt;
Signed-off-by: Andreas Kemnade &lt;andreas@kemnade.info&gt;
Link: https://patch.msgid.link/20260102-tps65185-submit-v3-2-23bda35772f2@kemnade.info
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Add Richtek RT8092 support</title>
<updated>2025-12-22T09:12:28+00:00</updated>
<author>
<name>Mark Brown</name>
<email>broonie@kernel.org</email>
</author>
<published>2025-12-22T09:12:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=06d65f2d478e49b68701aed18e58713aa178be16'/>
<id>06d65f2d478e49b68701aed18e58713aa178be16</id>
<content type='text'>
Merge series from cy_huang@richtek.com:

This patch series add rt8092 regulator support.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Merge series from cy_huang@richtek.com:

This patch series add rt8092 regulator support.
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: Add rt8092 support</title>
<updated>2025-12-19T08:32:06+00:00</updated>
<author>
<name>ChiYuan Huang</name>
<email>cy_huang@richtek.com</email>
</author>
<published>2025-12-19T06:36:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=32a708ba5db50cf928a1f1b2039ceef33de2c286'/>
<id>32a708ba5db50cf928a1f1b2039ceef33de2c286</id>
<content type='text'>
RT8092 is a 3MHz 4A efficiency step-down converter with I2C control
interface. It can support wide output range from 0.7 to 5.5V, based on
the voltage bank selection.

Signed-off-by: ChiYuan Huang &lt;cy_huang@richtek.com&gt;
Link: https://patch.msgid.link/d2293c513f396f86e54f9b806fd0195b57db7aae.1766125676.git.cy_huang@richtek.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
RT8092 is a 3MHz 4A efficiency step-down converter with I2C control
interface. It can support wide output range from 0.7 to 5.5V, based on
the voltage bank selection.

Signed-off-by: ChiYuan Huang &lt;cy_huang@richtek.com&gt;
Link: https://patch.msgid.link/d2293c513f396f86e54f9b806fd0195b57db7aae.1766125676.git.cy_huang@richtek.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
