linux-toradex.git/drivers/regulator/ab3100.c, branch v3.6.1

regulator: ab3100: add missing voltage table

2012-08-07T17:10:37+00:00

The conversion to voltage tables in

commit a3beb74261f26142019847128b2441b0301797ac
"regulator: ab3100: Use regulator_list_voltage_table()"

missed to add the voltage table to the buck. Fix this and
it works like a charm.

Signed-off-by: Linus Walleij 
Acked-by: Axel Lin 
Signed-off-by: Mark Brown

regulator: ab3100: Use rdev_get_drvdata() rather than use reg->reg_data driectly

2012-07-05T12:34:39+00:00

Signed-off-by: Axel Lin 
Acked-by: Linus Walleij 
Signed-off-by: Mark Brown

regulator: ab3100: Set enable enable_time in regulator_desc

2012-07-05T12:34:00+00:00

Signed-off-by: Axel Lin 
Acked-by: Linus Walleij 
Signed-off-by: Mark Brown

regulator: ab3100: Convert fixed voltage to use regulator_list_voltage_linear

2012-06-17T20:05:28+00:00

Signed-off-by: Axel Lin 
Signed-off-by: Mark Brown

regulator: ab3100: Use regulator_list_voltage_table()

2012-06-03T12:25:01+00:00

Signed-off-by: Axel Lin 
Acked-by: Linus Walleij 
Signed-off-by: Mark Brown

regulator: ab3100: Use regulator_map_voltage_iterate()

2012-05-18T07:39:57+00:00

regulator_map_voltage_iterate() is for drivers implementing set_voltage_sel()
and list_voltage() to use it as their map_voltage() operation.

In this case, regulator_map_voltage_iterate() happen to be doing the same thing
as ab3100_get_best_voltage_index() function. So we can use it to replace
ab3100_get_best_voltage_index() function.

Signed-off-by: Axel Lin 
Signed-off-by: Mark Brown

regulator: Remove unneeded include of linux/delay.h from regulator drivers

2012-04-23T12:20:26+00:00

All the drivers that need delay for the regulator voltage output voltage to
stabilize after being enabled or after being set to a new value has been
converted to implement enable_time and set_voltage_time_sel callbacks.
Then regulator core will take care of the necessary delay.

For the drivers that don't need the delay, don't need to include linux/delay.h.
This patch removes the unneeded include of linux/delay.h in regulator drivers.

Signed-off-by: Axel Lin 
Signed-off-by: Mark Brown

regulator: core: Use a struct to pass in regulator runtime configuration

2012-04-09T11:37:09+00:00

Rather than adding new arguments to regulator_register() every time we
want to add a new bit of dynamic information at runtime change the function
to take these via a struct. By doing this we avoid needing to do further
changes like the recent addition of device tree support which required each
regulator driver to be updated to take an additional parameter.

The regulator_desc which should (mostly) be static data is still passed
separately as most drivers are able to configure this statically at build
time.

Signed-off-by: Mark Brown

regulator: Convert ab3100 to set_voltage_sel

2012-04-01T10:59:23+00:00

Signed-off-by: Axel Lin 
Tested-by: Linus Walleij 
Signed-off-by: Mark Brown

regulator: pass additional of_node to regulator_register()

2011-11-23T18:47:04+00:00

With device tree support for regulators, its needed that the
regulator_dev->dev device has the right of_node attached.
To be able to do this add an additional parameter to the
regulator_register() api, wherein the dt-adapted driver can
then pass this additional info onto the regulator core.

Signed-off-by: Rajendra Nayak 
Signed-off-by: Mark Brown