linux-toradex.git/drivers/regulator/max8925-regulator.c, branch v3.4.23 Linux kernel for Apalis and Colibri modules regulator: max8925: Use DIV_ROUND_UP macro 2012-03-13T23:19:40+00:00 Axel Lin axel.lin@gmail.com 2012-03-13T08:09:28+00:00 5db6d09a2b4663735121dfe4222860424788a93f Use DIV_ROUND_UP macro for better readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 
Use DIV_ROUND_UP macro for better readability.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
regulator: max8925: fix enabled/disabled judgement mistake 2012-01-06T18:56:14+00:00 Kevin Liu kliu5@marvell.com 2012-01-04T07:12:04+00:00 65364e9ab958f4ad21c5c7b6cc8e2e458128dbcb Max8925 ldo status should be determined by two factors: 1. power up/down sequence selection(LDOCTL[4:2]). 2. i2c enable bit(LDOCTL[0]). Max8925 ldo support two types of power up/down sequence: 1. flexible sequence(LDOCTL[4:2] = 0~6). 2. i2c sequence(LDOCTL[4:2] = 7). With flexible sequence selected, the ldo is enabled during power up by default. With i2c sequence selected, the ldo is controlled by the i2c enable bit(LDOCTL[0]). Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 
Max8925 ldo status should be determined by two factors:
1. power up/down sequence selection(LDOCTL[4:2]).
2. i2c enable bit(LDOCTL[0]).

Max8925 ldo support two types of power up/down sequence:
1. flexible sequence(LDOCTL[4:2] = 0~6).
2. i2c sequence(LDOCTL[4:2] = 7).

With flexible sequence selected, the ldo is enabled during power up by default.
With i2c sequence selected, the ldo is controlled by the i2c enable bit(LDOCTL[0]).

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
regulator: pass additional of_node to regulator_register() 2011-11-23T18:47:04+00:00 Rajendra Nayak rnayak@ti.com 2011-11-18T11:17:19+00:00 2c043bcbf287dc69848054d5c02c55c20f7a7bc5 With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 
With device tree support for regulators, its needed that the
regulator_dev->dev device has the right of_node attached.
To be able to do this add an additional parameter to the
regulator_register() api, wherein the dt-adapted driver can
then pass this additional info onto the regulator core.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
regulator: Add module.h to drivers/regulator users as required 2011-10-31T23:32:15+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2011-07-17T20:28:23+00:00 65602c32ee9b5500e3cb617ccec2154ee2191898 Another group of drivers that are taking advantage of the implicit presence of module.h -- and will break when we pull the carpet out from under them during a cleanup. Fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> 
Another group of drivers that are taking advantage of the implicit
presence of module.h -- and will break when we pull the carpet out
from under them during a cleanup.  Fix 'em now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
regulator: Enable max8925 i2c sequence for control 2011-05-26T17:45:33+00:00 Haojian Zhuang haojian.zhuang@marvell.com 2011-04-18T14:04:09+00:00 db13c04002e0d896f89657f9b2837a8ecfbb19b6 Force to enable i2c as power up/down sequence. Otherwise, SD/LDO can't be enabled or disabled via accessing i2c bus. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Force to enable i2c as power up/down sequence. Otherwise, SD/LDO can't
be enabled or disabled via accessing i2c bus.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
regulator: Report actual configured voltage to set_voltage() 2011-01-12T14:32:59+00:00 Mark Brown broonie@opensource.wolfsonmicro.com 2010-11-10T14:38:29+00:00 3a93f2a9f4d8f73d74c0e552feb68a10f778a219 Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> 
Change the interface used by set_voltage() to report the selected value
to the regulator core in terms of a selector used by list_voltage().
This allows the regulator core to know the voltage that was chosen
without having to do an explict get_voltage(), which would be much more
expensive as it will generally access hardware.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
regulator: fix enabling regulator issue on max8925 2010-04-28T14:24:34+00:00 Haojian Zhuang haojian.zhuang@marvell.com 2010-04-06T10:19:15+00:00 4b99fef02510706a73c8400045b4c72514e581c4 Fix regulator enabling issue that is caused by typo error in is_enabled(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> 
Fix regulator enabling issue that is caused by typo error in is_enabled().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Regulators: max8925-regulator - clean up driver data after removal 2010-03-22T19:44:44+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2010-02-24T07:38:55+00:00 3fff6c04d81a2852821135736fad2d8386464753 It is a good tone to reset driver data after unbinding the device. Also change find_regulator_info() fro inline to __devinit - let compiler figure out if it wants it to be inlined or not. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> 
It is a good tone to reset driver data after unbinding the device.
Also change find_regulator_info() fro inline to __devinit - let compiler
figure out if it wants it to be inlined or not.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
regulator: Add max8925 support 2010-03-07T21:17:08+00:00 Haojian Zhuang haojian.zhuang@marvell.com 2010-01-11T12:10:08+00:00 08ff6f2a9908c87b0adffe6453291be22db3a62f MAX8925 contains 3 Buck and 20 LDO regulator. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
MAX8925 contains 3 Buck and 20 LDO regulator.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>