The PMIC PCA9451A and PCA9452 have a default power-off debounce time of
2ms according to their datasheet, while PCA9450A and PCA9450BC use 120us.

Add default_t_off_deb field to struct pca9450 to support per-variant
default configuration when the device tree property is not specified.

Datasheet reference links:
- PCA9451A Rev.2.1: https://www.nxp.com/docs/en/data-sheet/PCA9451A.pdf
- PCA9452 Rev.1.0: https://www.nxp.com/docs/en/data-sheet/PCA9452.pdf

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260618-b4-regulator-opt-v1-1-c43b1f62aaf6@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

An incorrect device name was logged for PCA9452 because the dev_info()
ternary omitted PCA9452 and fell through to "pca9450bc". Introduce a
type_name and set it per device type so the probed message matches the
actual PMIC. While here, make the PCA9451A case explicit.

No functional changes.

Fixes: 017b76fb8e5b6 ("regulator: pca9450: Add PMIC pca9452 support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260310-pca9450-irq-v1-2-36adf52c2c55@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Kernel warning on i.MX8MP-EVK when doing module test:
irq: type mismatch, failed to map hwirq-3 for gpio@30200000!

Per PCA945[X] specification: The IRQ_B pin is pulled low when any unmasked
interrupt bit status is changed and it is released high once application
processor read INT1 register.

So the interrupt should be configured as IRQF_TRIGGER_LOW, not
IRQF_TRIGGER_FALLING.

Fixes: 0935ff5f1f0a4 ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260310-pca9450-irq-v1-1-36adf52c2c55@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:

Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.

Some drivers already have const everywhere, so container_of_const can be
directly used. In few other drivers, the final pointer can be constified
that way.

Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-7-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Return "PTR_ERR(pca9450->sd_vsel_gpio)" instead of "ret".  The "ret"
variable is success at this point.

Fixes: 3ce6f4f943dd ("regulator: pca9450: Fix control register for LDO5")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSBqnPoBrsNB1Ale@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>

Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.

Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Link: https://patch.msgid.link/20251117202215.1936139-2-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add supply_name entries for all PCA9450 regulators to describe their
respective input pin groups (INB13, INB26, INB45, INL1). This links each
buck and LDO to the upstream supply that powers its input group.

On some systems, power faults such as undervoltage are detected before
the PMIC itself. Defining supply relationships allows the regulator
framework to propagate such events properly through the dependency
chain.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027124415.989301-3-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

With module test, there is error dump:
------------[ cut here ]------------
  notifier callback pca9450_i2c_restart_handler already registered
  WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
  CPU#0: kworker/u16:3/50
  Call trace:
  notifier_chain_register+0x5c/0x88 (P)
  atomic_notifier_chain_register+0x30/0x58
  register_restart_handler+0x1c/0x28
  pca9450_i2c_probe+0x418/0x538
  i2c_device_probe+0x220/0x3d0
  really_probe+0x114/0x410
  __driver_probe_device+0xa0/0x150
  driver_probe_device+0x40/0x114
  __device_attach_driver+0xd4/0x12c

So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.

Fixes: 6157e62b07d9 ("regulator: pca9450: Add restart handler")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250815-pca9450-v1-1-7748e362dc97@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Previous commit 548d770c330c ("regulator: pca9450: Add support for mode
operations") added support for setting forced PWM mode on the buck
regulators for pca9450a and pca9450bc parts. However part pca9451a also
supports this feature, thus add support for it.

Fixes: 548d770c330c ("regulator: pca9450: Add support for mode operations")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250618063339.2508893-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>