commit a35ff2861690eaf9dbb38fa744a8a9e6f4ebfd61 upstream. Both 5102 and 8997 have the regulator capable of supplying 1.8V, and the voltage step from the 5110 regulator is different from what is specified in the default description. This patch updates the default regulator description to match 5110 and selects the 1.8V capable description for 8997. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 66fda75f47dc583f1c187556e9a2c082dd64f8c6 upstream. There are many places where ops->disable is called directly. Instead we should use _regulator_do_disable() which also handles gpio regulators. To be able to use the wrapper function from _regulator_force_disable(), I moved the _notifier_call_chain() call from _regulator_do_disable() to _regulator_disable(). This way, _regulator_force_disable() can use different flags for _notifier_call_chain() without calling it twice. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 30c219710358c5cca2f8bd2e9e547c6aadf7cf8b upstream. There are some direct ops->enable in the regulator core driver. This is a potential issue as the function _regulator_do_enable() handles gpio regulators and the normal ops->enable calls. These gpio regulators are simply ignored when ops->enable is called directly. One possible bug is that boot-on and always-on gpio regulators are not enabled on registration. This patch replaces all ops->enable calls by _regulator_do_enable. [Handle missing enable operations -- broonie] Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit ebf6dad0de89677aa58a4d8b009014ff88a23452 upstream. Bug fix to allow the setting of maximum voltage for certain LDOs. What the bug is: There is a problem caused by an invalid calculation of n_voltages in the driver. This n_voltages value has the potential to be different for each regulator. The value for linear_min_sel is set as DA9063_V##regl_name# which can be different depending upon the regulator. This is chosen according to the following definitions in the DA9063 registers.h file: DA9063_VLDO1_BIAS 0 DA9063_VLDO2_BIAS 0 DA9063_VLDO3_BIAS 0 DA9063_VLDO4_BIAS 0 DA9063_VLDO5_BIAS 2 DA9063_VLDO6_BIAS 2 DA9063_VLDO7_BIAS 2 DA9063_VLDO8_BIAS 2 DA9063_VLDO9_BIAS 3 DA9063_VLDO10_BIAS 2 DA9063_VLDO11_BIAS 2 The calculation for n_voltages is valid for LDOs whose BIAS value is zero but this is not correct for those LDOs which have a non-zero value. What the fix is: In order to take into account the non-zero linear_min_sel value which is set for the regulators LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 and LDO11, the calculation for n_voltages should take into account the missing term defined by DA9063_V##regl_name#. This will in turn allow the core constraints calculation to set the maximum voltage limits correctly and therefore allow users to apply the maximum expected voltage to all of the LDOs. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit a1b6fa85c639ad0d5447d1a5e7d1463bbe29fcd3 upstream. According to the datasheet, the address of FABID is 0x4. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88baf7148e899db7e0b676e4363647f50e48eaed upstream. prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a633a2bced158c57b73cf4d8e87be60473de1d2 upstream. commit 40b1936e (regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver) missed a pair of brackets which cause the wrong vset data to be picked up from efuse, resulting in bad VBB voltage values. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>