linux-toradex.git/drivers/regulator, branch v4.9.110

regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'

2018-05-30T05:50:51+00:00

[ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ]

If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must
release the reference on the current 'child' node before returning.

Signed-off-by: Christophe JAILLET 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'

2018-05-30T05:50:45+00:00

[ Upstream commit ed8cffda27dea6fd3dafb3ee881c5a786edac9ca ]

Re-order error handling code and gotos to avoid leaks in error handling
paths.

Fixes: 9f946099fe19 ("regulator: gpio: fix parsing of gpio list")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

regulator: anatop: set default voltage selector for pcie

2018-03-24T10:00:09+00:00

[ Upstream commit 9bf944548169f6153c3d3778cf983cb5db251a0e ]

Set the initial voltage selector for vddpcie in case it's disabled
by default.

This fixes the below warning:
20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22

Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Robin Gong 
Cc: Richard Zhu 
Signed-off-by: Richard Zhu 
Signed-off-by: Dong Aisheng 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

regulator: core: Limit propagation of parent voltage count and list

2018-03-22T08:17:44+00:00

[ Upstream commit fd086045559d90cd7854818b4c60a7119eda6231 ]

Commit 26988efe11b1 ("regulator: core: Allow to get voltage count and
list from parent") introduces the propagation of the parent voltage
count and list for regulators that don't provide this information
themselves. The goal is to support simple switch regulators, however as
a side effect normal continuous regulators can leak details of their
supplies and provide consumers with inconsistent information.

Limit the propagation of the voltage count and list to switch
regulators.

Fixes: 26988efe11b1 ("regulator: core: Allow to get voltage count and
  list from parent")
Signed-off-by: Matthias Kaehlcke 
Reviewed-by: Javier Martinez Canillas 
Tested-by: Javier Martinez Canillas 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

regulator: fan53555: fix I2C device ids

2017-11-02T08:49:15+00:00

commit fc1111b885437f374ed54aadda44d8b241ebd2a3 upstream.

The device tree nodes all correctly describe the regulators as
syr827 or syr828, but the I2C device id is currently set to the
wildcard value of syr82x in the driver.  This causes udev to fail
to match the driver module with the modalias data from sysfs.

Fix this by replacing the I2C device ids with ones that match the
device tree descriptions, with syr827 and syr828.  Tested on
Firefly rk3288 board.  The syr82x id was not used anywhere.

Fixes: e80c47bd738b (regulator: fan53555: Export I2C module alias information)
Signed-off-by: Guillaume Tucker 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: core: Resolve supplies before disabling unused regulators

2017-10-21T15:21:38+00:00

[ Upstream commit 3827b64dba27ebadb4faf51f2c91143e01ba1f6d ]

After commit 66d228a2bf03 ("regulator: core: Don't use regulators as
supplies until the parent is bound"), input supplies aren't resolved
if the input supplies parent device has not been bound. This prevent
regulators to hold an invalid reference if its supply parent device
driver probe is deferred.

But this causes issues on some boards where a PMIC's regulator use as
input supply a regulator from another PMIC whose driver is registered
after the driver for the former.

In this case the regulators for the first PMIC will fail to resolve
input supplies on regulators registration (since the other PMIC wasn't
probed yet). And when the core attempts to resolve again latter when
the other PMIC registers its own regulators, it will fail again since
the parent device isn't bound yet.

This will cause some parent supplies to never be resolved and wrongly
be disabled on boot due taking them as unused.

To solve this problem, also attempt to resolve the pending regulators
input supplies before disabling the unused regulators.

Signed-off-by: Javier Martinez Canillas 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

regulator: tps65086: Fix DT node referencing in of_parse_cb

2017-07-05T12:40:29+00:00

commit 6308f1787fb85bc98b7241a08a9f7f33b47f8b61 upstream.

When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz 
Signed-off-by: Andrew F. Davis 
Tested-by: Steven Kipisz 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: tps65086: Fix expected switch DT node names

2017-07-05T12:40:28+00:00

commit 1c47f7c316de38c30b481e1886cc6352c9efdcc1 upstream.

The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz 
Signed-off-by: Andrew F. Davis 
Tested-by: Steven Kipisz 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: tps65023: Fix inverted core enable logic.

2017-05-25T13:44:35+00:00

commit c90722b54a4f5e21ac59301ed9a6dbaa439bdb16 upstream.

Commit 43530b69d758328d3ffe6ab98fd640463e8e3667 ("regulator: Use
regmap_read/write(), regmap_update_bits functions directly") intended
to replace working inline helper functions with standard regmap
calls.  However, it also inverted the set/clear logic of the "CORE ADJ
Allowed" bit.  That patch was clearly never tested, since without that
bit cleared, the core VDCDC1 voltage output does not react to I2C
configuration changes.

This patch fixes the issue by clearing the bit as in the original,
correct implementation.  Note for stable back porting that, due to
subsequent driver churn, this patch will not apply on every kernel
version.

Fixes: 43530b69d758 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly")
Signed-off-by: Richard Cochran 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: rk808: Fix RK818 LDO2

2017-05-25T13:44:35+00:00

commit 75f88115391156b3f0fecbbae76bf870c89bcab8 upstream.

Set the correct voltage select register for LDO2.

Signed-off-by: Wadim Egorov 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman