linux-toradex.git/drivers/regulator, branch v4.9.49

regulator: tps65086: Fix DT node referencing in of_parse_cb

2017-07-05T12:40:29+00:00

commit 6308f1787fb85bc98b7241a08a9f7f33b47f8b61 upstream.

When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz 
Signed-off-by: Andrew F. Davis 
Tested-by: Steven Kipisz 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: tps65086: Fix expected switch DT node names

2017-07-05T12:40:28+00:00

commit 1c47f7c316de38c30b481e1886cc6352c9efdcc1 upstream.

The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz 
Signed-off-by: Andrew F. Davis 
Tested-by: Steven Kipisz 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: tps65023: Fix inverted core enable logic.

2017-05-25T13:44:35+00:00

commit c90722b54a4f5e21ac59301ed9a6dbaa439bdb16 upstream.

Commit 43530b69d758328d3ffe6ab98fd640463e8e3667 ("regulator: Use
regmap_read/write(), regmap_update_bits functions directly") intended
to replace working inline helper functions with standard regmap
calls.  However, it also inverted the set/clear logic of the "CORE ADJ
Allowed" bit.  That patch was clearly never tested, since without that
bit cleared, the core VDCDC1 voltage output does not react to I2C
configuration changes.

This patch fixes the issue by clearing the bit as in the original,
correct implementation.  Note for stable back porting that, due to
subsequent driver churn, this patch will not apply on every kernel
version.

Fixes: 43530b69d758 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly")
Signed-off-by: Richard Cochran 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: rk808: Fix RK818 LDO2

2017-05-25T13:44:35+00:00

commit 75f88115391156b3f0fecbbae76bf870c89bcab8 upstream.

Set the correct voltage select register for LDO2.

Signed-off-by: Wadim Egorov 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: Fix regulator_summary for deviceless consumers

2017-03-12T05:41:43+00:00

commit e42a46b6f52473661ad192f76a128a68fe301df4 upstream.

It is allowed to call regulator_get with a NULL dev argument
(_regulator_get explicitly checks for it) but this causes an error later
when printing /sys/kernel/debug/regulator_summary.

Fix this by explicitly handling "deviceless" consumers in the debugfs code.

Signed-off-by: Leonard Crestez 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce

2017-02-09T07:08:28+00:00

commit d0e287a401d9acf67b75180b26e2d62b7d482652 upstream.

A typo or copy-paste bug means that the register access intended for
regulator dcdce goes to dcdcb instead. This patch corrects it.

Fixes: 2ca342d391e3 (regulator: axp20x: Support AXP806 variant)
Signed-off-by: Rask Ingemann Lambertsen 
Acked-by: Chen-Yu Tsai 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmap

2017-01-19T19:18:06+00:00

commit 85b037442e3f0e84296ab1010fd6b057eee18496 upstream.

The handling of bypass_val_on that was added in
regulator_get_bypass_regmap is done unconditionally however
several drivers don't define a value for bypass_val_on. This
results in those drivers reporting bypass being enabled when
it is not. In regulator_set_bypass_regmap we use bypass_mask
if bypass_val_on is zero. This patch adds similar handling in
regulator_get_bypass_regmap.

Fixes: commit dd1a571daee7 ("regulator: helpers: Ensure bypass register field matches ON value")
Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: axp20x: Fix axp809 ldo_io registration error on cold boot

2017-01-19T19:17:57+00:00

commit 618c808968852609d2d9f0e5cfc351a4807ef8d0 upstream.

The maximum supported voltage for ldo_io# is 3.3V, but on cold boot
the selector comes up at 0x1f, which maps to 3.8V. This was previously
corrected by Allwinner's U-boot, which set all regulators on the PMICs
to some pre-configured voltage. With recent progress in U-boot SPL
support, this is no longer the case. In any case we should handle
this quirk in the kernel driver as well.

This invalid setting causes _regulator_get_voltage() to fail with -EINVAL
which causes regulator registration to fail when constrains are used:

[    1.054181] vcc-pg: failed to get the current voltage(-22)
[    1.059670] axp20x-regulator axp20x-regulator.0: Failed to register ldo_io0
[    1.069749] axp20x-regulator: probe of axp20x-regulator.0 failed with error -22

This commits makes the axp20x regulator driver accept the 0x1f register
value, fixing this.

The datasheet does not guarantee reliable operation above 3.3V, so on
boards where this regulator is used the regulator-max-microvolt setting
must be 3.3V or less.

This is essentially the same as the commit f40d4896bf32 ("regulator:
axp20x: Fix axp22x ldo_io registration error on cold boot") for AXP22x
PMICs.

Fixes: a51f9f4622a3 ("regulator: axp20x: support AXP809 variant")
Signed-off-by: Chen-Yu Tsai 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: tps65086: Fix 25mV ranges for BUCK regulators

2017-01-19T19:17:57+00:00

commit d8ca5bd158f738c4fa6974ee388c381f64db7905 upstream.

The BUCK regulators 3, 4, and 5 also have a 10mV step mode,
adjust the tables and logic to reflect the data-sheet for
these regulators.

fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by: Andrew F. Davis 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

regulator: stw481x-vmmc: fix ages old enable error

2017-01-09T07:32:17+00:00

commit 295070e9aa015abb9b92cccfbb1e43954e938133 upstream.

The regulator has never been properly enabled, it has been
dormant all the time. It's strange that MMC was working
at all, but it likely worked by the signals going through
the levelshifter and reaching the card anyways.

Fixes: 3615a34ea1a6 ("regulator: add STw481x VMMC driver")
Signed-off-by: Linus Walleij 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman