An incorrect device name was logged for PCA9452 because the dev_info()
ternary omitted PCA9452 and fell through to "pca9450bc". Introduce a
type_name and set it per device type so the probed message matches the
actual PMIC. While here, make the PCA9451A case explicit.

No functional changes.

Fixes: 017b76fb8e5b6 ("regulator: pca9450: Add PMIC pca9452 support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260310-pca9450-irq-v1-2-36adf52c2c55@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Kernel warning on i.MX8MP-EVK when doing module test:
irq: type mismatch, failed to map hwirq-3 for gpio@30200000!

Per PCA945[X] specification: The IRQ_B pin is pulled low when any unmasked
interrupt bit status is changed and it is released high once application
processor read INT1 register.

So the interrupt should be configured as IRQF_TRIGGER_LOW, not
IRQF_TRIGGER_FALLING.

Fixes: 0935ff5f1f0a4 ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260310-pca9450-irq-v1-1-36adf52c2c55@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The datasheet specifies, that the IRQ_B pin is pulled low when any
unmasked interrupt bit status is changed, and it is released high once
the application processor reads the INT1 register. As it specifies a
level-low behavior, it should not force a falling-edge interrupt.

Remove the IRQF_TRIGGER_FALLING to not force the falling-edge interrupt
and instead rely on the flag from the device tree.

Fixes: 0959b6706325 ("regulator: pf9453: add PMIC PF9453 support")
Cc: stable@vger.kernel.org
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Link: https://patch.msgid.link/20260218102518.238943-2-fra.schnyder@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

In mt6363_regulator_probe(), devm_add_action_or_reset() is used to
automatically dispose of the IRQ mapping if the probe fails or the
device is removed.

The manual call to irq_dispose_mapping() in the error path was redundant
as the reset action already triggers mt6363_irq_remove(). Furthermore,
the manual call incorrectly passed the hardware IRQ number (info->hwirq)
instead of the virtual IRQ mapping (info->virq).

Remove the redundant and incorrect manual disposal.

Fixes: 3c36965df808 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260223-mt6363-v1-1-c99a2e8ac621@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Fixes a typo in Kconfig, HWWON -> HWMON

Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-kconfig-v1-1-b0c5459ed7a0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak.

Fixes: 981dd162b635 ("regulator: bq257xx: Add bq257xx boost regulator driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-bq257-v1-1-8ebbc731c1c3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

In fp9931_hwmon_read(), if regmap_read() failed, the function returned
the error code without calling pm_runtime_put_autosuspend(), causing
a PM reference leak.

Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260224-fp9931-v1-1-1cf05cabef4a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

tps65185_probe() dereferences the allocation result immediately by using data->regmap. If devm_kzalloc() returns NULL under memory pressure, this leads to a NULL pointer dereference.

Add the missing allocation check and return -ENOMEM on failure.

Signed-off-by: Yufan Chen <ericterminal@gmail.com>
Link: https://patch.msgid.link/20260222104035.90790-1-ericterminal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>