linux-toradex.git/drivers/remoteproc/Kconfig, branch v5.0

remoteproc: qcom: Introduce Non-PAS ADSP PIL driver

2018-10-06T06:51:34+00:00

This adds Non PAS ADSP PIL driver for Qualcomm Technologies Inc SoCs.

Added initial support for SDM845 with ADSP bootup and shutdown operation
handled from Application Processor SubSystem(APSS).

Reviewed-by: Sibi Sankar 
Tested-by: Sibi Sankar 
Signed-off-by: Rohit kumar 
[bjorn: Renamed driver and Kconfig from qcom_adsp_pil to qcom_q6v5_adsp]
Signed-off-by: Bjorn Andersson

remoteproc: qcom: Rename Hexagon v5 modem driver

2018-09-26T17:11:37+00:00

The qcom_q6v5_pil implements support for the self-authenticating modem
subsystem. With the introduction of other q6v5 based non-TZ based
remoteproc driver the current name is cause for confusion, so rename it
to be more specific.

No functional change.

Reviewed-by: Niklas Cassel 
Signed-off-by: Bjorn Andersson

remoteproc: qcom: Rename Hexagon v5 PAS driver

2018-09-26T17:11:20+00:00

The Hexagon v5 ADSP driver is used for more than only the ADSP and
there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to
qcom_q6v5_pas in order to better suite this.

Cc: Rohit kumar 
Reviewed-by: Niklas Cassel 
Signed-off-by: Bjorn Andersson

remoteproc: qcom: fix Q6V5_WCSS dependencies

2018-07-31T04:17:26+00:00

A new driver got added that depends on QCOM_SMD and fails to link
as built-in with CONFIG_QCOM_SMD=m:

drivers/remoteproc/qcom_common.o: In function `smd_subdev_stop':
qcom_common.c:(.text+0x674): undefined reference to `qcom_smd_unregister_edge'
drivers/remoteproc/qcom_common.o: In function `smd_subdev_start':
qcom_common.c:(.text+0x700): undefined reference to `qcom_smd_register_edge'

We've fixed the same thing several times before, so use the same
dependency here.

Fixes: 3a3d4163e0bf ("remoteproc: qcom: Introduce Hexagon V5 based WCSS driver")
Acked-by: Sricharan R 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Bjorn Andersson

remoteproc: qcom: Introduce Hexagon V5 based WCSS driver

2018-06-18T22:57:58+00:00

IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan
(Lithium) IP. An mdt type single image format is used for the
firmware. So the mdt_load function can be directly used to load
the firmware. Also add the relevant resets required for this core.

Acked-by: Rob Herring  (bindings)
Signed-off-by: Sricharan R 
[bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c]
Signed-off-by: Bjorn Andersson

remoteproc: qcom: q6v5-pil: Use common q6v5 helpers

2018-06-18T22:56:05+00:00

Migrate the MSS remoteproc driver to use the newly extracted helper
functions.

Reviewed-by: Sricharan R 
Signed-off-by: Bjorn Andersson

remoteproc: qcom: adsp: Use common q6v5 helpers

2018-06-18T22:56:02+00:00

Migrate the Hexagon V5 PAS (ADSP) driver to using the newly extracted
helper functions. The use of the handover callback does introduce latent
disabling of proxy resources. But apart from this there should be no
change in functionality.

Reviewed-by: Rohit kumar 
Reviewed-by: Sricharan R 
Tested-by: Rohit kumar 
Signed-off-by: Bjorn Andersson

remoteproc: q6v5: Extract common resource handling

2018-06-18T22:55:57+00:00

Shared between all Hexagon V5 based remoteprocs is the handling of the 5
interrupts and the SMP2P stop request, so break this out into a separate
function in order to allow these drivers to be cleaned up.

Reviewed-by: Rohit kumar 
Tested-by: Rohit kumar 
Signed-off-by: Bjorn Andersson

remoteproc: Remove depends on HAS_DMA in case of platform dependency

2018-04-26T03:37:39+00:00

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Mark Brown 
Acked-by: Robin Murphy 
Acked-by: Bjorn Andersson 
Signed-off-by: Bjorn Andersson

soc: qcom: qmi: add CONFIG_NET dependency

2018-03-27T20:43:29+00:00

Access to the socket API and the root network namespace is only available
when networking is enabled:

ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined!

Adding a dependency on CONFIG_NET lets us build it in all randconfig
builds.

Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder")
Acked-by: Andy Gross 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Bjorn Andersson