linux-toradex.git/drivers/remoteproc, branch v4.10 Linux kernel for Apalis and Colibri modules Revert "remoteproc: Merge table_ptr and cached_table pointers" 2016-12-30T11:26:31+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2016-12-30T11:21:38+00:00 a0c10687ec9506b5e14fe3dd47832a77f2f2500c Following any fw_rsc_vdev entries in the resource table are two variable length arrays, the first one reference vring resources and the second one is the virtio config space. The virtio config space is used by virtio to communicate status and configuration changes and must as such be shared with the remote. The reverted commit incorrectly made any changes to the virtio config space only affect the local copy, in an attempt to allowing memory protection of the shared resource table. This reverts commit cda8529346935fc86f476999ac4fbfe4e17abf11. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Following any fw_rsc_vdev entries in the resource table are two variable
length arrays, the first one reference vring resources and the second
one is the virtio config space.  The virtio config space is used by
virtio to communicate status and configuration changes and must as such
be shared with the remote.

The reverted commit incorrectly made any changes to the virtio config
space only affect the local copy, in an attempt to allowing memory
protection of the shared resource table.

This reverts commit cda8529346935fc86f476999ac4fbfe4e17abf11.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: fix vdev reference management 2016-12-30T11:15:42+00:00 Loic Pallardy loic.pallardy@st.com 2016-12-14T15:11:00+00:00 c81c0e0710f031cb09eb7cbf0e75e6754d1d8346 Commit 2b45cef5868a ("remoteproc: Further extend the vdev life cycle") extends kref support for vdev management. It introduces a regression when following sequence is executed: rproc_boot --> rproc_shutdown --> rproc_boot Second rproc_boot call crashes on register_virtio_device as device is already existing. Issue is previous vdev is never released when rproc is stop because associated refcount is too high. kref_get introduces is not needed as kref_init already initializes krefcount to 1 because it considers associated variable as used. This introduces a misalignment between kref_get and kref_put calls. Fixes: 2b45cef5868a ("remoteproc: Further extend the vdev life cycle") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Commit 2b45cef5868a ("remoteproc: Further extend the vdev life cycle")
extends kref support for vdev management.
It introduces a regression when following sequence is executed:
rproc_boot --> rproc_shutdown --> rproc_boot
Second rproc_boot call crashes on register_virtio_device as device
is already existing.
Issue is previous vdev is never released when rproc is stop because
associated refcount is too high.

kref_get introduces is not needed as kref_init already initializes
krefcount to 1 because it considers associated variable as used.
This introduces a misalignment between kref_get and kref_put calls.

Fixes: 2b45cef5868a ("remoteproc: Further extend the vdev life cycle")
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: qcom_adsp_pil: select qcom_scm 2016-12-10T00:16:56+00:00 Arnd Bergmann arnd@arndb.de 2016-12-09T11:47:02+00:00 e2a32b6bb59c3274f466559b897d0d6acded507d The adsp-pil driver relies on SCM and causes a build error without it: ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This adds a 'select', as SCM is a silent Kconfig symbol that gets enabled implicitly by all its users. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
The adsp-pil driver relies on SCM and causes a build error without it:

ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!

This adds a 'select', as SCM is a silent Kconfig symbol that gets
enabled implicitly by all its users.

Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: Drop wait in __rproc_boot() 2016-12-10T00:16:55+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2016-12-07T01:04:45+00:00 2bfc311a57f5694106fdd0db7ca1eb6a4b35f2a9 In the event that rproc_boot() is called before the firmware loaded completion has been flagged it will wait with the mutex held, obstructing the request_firmware_nowait() callback from completing the wait. As rproc_fw_config_virtio() has been reduced to only triggering auto-boot there is no longer a reason for waiting in rproc_boot(), so drop this. Cc: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
In the event that rproc_boot() is called before the firmware loaded
completion has been flagged it will wait with the mutex held,
obstructing the request_firmware_nowait() callback from completing the
wait.

As rproc_fw_config_virtio() has been reduced to only triggering
auto-boot there is no longer a reason for waiting in rproc_boot(), so
drop this.

Cc: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc/ste: Delete unused driver 2016-12-10T00:16:54+00:00 Jean Delvare jdelvare@suse.de 2016-12-05T13:10:21+00:00 394c62000acb0b47b105d1b52e7d8f827c3293e3 Back in July 2014 I asked around what was the intended target platform for the STE Modem remoteproc driver, so that I could add the proper hardware dependency to its config option. The answer I got was that there was no known publicly available hardware needing it and it was unlikely that there ever would. So I think it's time to delete this driver to lower the maintenance burden. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Suman Anna <s-anna@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Back in July 2014 I asked around what was the intended target
platform for the STE Modem remoteproc driver, so that I could add the
proper hardware dependency to its config option. The answer I got was
that there was no known publicly available hardware needing it and it
was unlikely that there ever would.

So I think it's time to delete this driver to lower the maintenance
burden.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Suman Anna <s-anna@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: Remove "experimental" warning 2016-12-10T00:13:19+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2016-12-03T04:43:50+00:00 a4ff18e9ed1ddde1f0bcc26bd05730b50b227f48 Warning users that remoteproc and it's binary format are under development doesn't serve much of a purpose. Different drivers support different image formats and the resource table has a version field that would need to be bumped when incompatible changes are introduced. So lets drop this warning to clean up the kernel log. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Warning users that remoteproc and it's binary format are under
development doesn't serve much of a purpose. Different drivers support
different image formats and the resource table has a version field that
would need to be bumped when incompatible changes are introduced.

So lets drop this warning to clean up the kernel log.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: qcom_adsp_pil: select qcom_scm 2016-12-09T18:55:00+00:00 Arnd Bergmann arnd@arndb.de 2016-12-09T11:47:02+00:00 8af1d63e638b7e9cbfa5469cda0c041c1b64b791 The adsp-pil driver relies on SCM and causes a build error without it: ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This adds a 'select', as SCM is a silent Kconfig symbol that gets enabled implicitly by all its users. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
The adsp-pil driver relies on SCM and causes a build error without it:

ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!

This adds a 'select', as SCM is a silent Kconfig symbol that gets
enabled implicitly by all its users.

Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: qcom: mdt_loader: add include for sizes 2016-12-02T22:41:54+00:00 Stanimir Varbanov stanimir.varbanov@linaro.org 2016-11-22T17:02:17+00:00 e67af182c286bb60d196c1a3001de873845ed731 Add linux/sizes.h to prevent build failure on non ARM architectures as: CC [M] drivers/remoteproc/qcom_mdt_loader.o In file included from include/linux/cache.h:4:0, from include/linux/printk.h:8, from include/linux/kernel.h:13, from include/asm-generic/bug.h:13, from arch/x86/include/asm/bug.h:35, from include/linux/bug.h:4, from include/linux/thread_info.h:11, from arch/x86/include/asm/elf.h:7, from include/linux/elf.h:4, from drivers/remoteproc/qcom_mdt_loader.c:18: drivers/remoteproc/qcom_mdt_loader.c: In function ‘qcom_mdt_parse’: drivers/remoteproc/qcom_mdt_loader.c:90:52: error: ‘SZ_4K’ undeclared (first use in this function) Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Add linux/sizes.h to prevent build failure on non ARM architectures
as:

CC [M]  drivers/remoteproc/qcom_mdt_loader.o
In file included from include/linux/cache.h:4:0,
                 from include/linux/printk.h:8,
                 from include/linux/kernel.h:13,
                 from include/asm-generic/bug.h:13,
                 from arch/x86/include/asm/bug.h:35,
                 from include/linux/bug.h:4,
                 from include/linux/thread_info.h:11,
                 from arch/x86/include/asm/elf.h:7,
                 from include/linux/elf.h:4,
                 from drivers/remoteproc/qcom_mdt_loader.c:18:
drivers/remoteproc/qcom_mdt_loader.c: In function ‘qcom_mdt_parse’:
drivers/remoteproc/qcom_mdt_loader.c:90:52: error: ‘SZ_4K’ undeclared
(first use in this function)

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: Update last rproc_put users to rproc_free 2016-11-20T06:47:36+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2016-11-20T06:42:55+00:00 90a80d88d2aac41f658ae4260ea259a292f95cb1 The transition from rproc_put to rproc_free raced with the review of the Qualcomm ADSP and ST SLIMproc drivers and these where not updated accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
The transition from rproc_put to rproc_free raced with the review of the
Qualcomm ADSP and ST SLIMproc drivers and these where not updated
accordingly.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE 2016-11-20T06:47:36+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2016-11-20T06:41:56+00:00 6242347226c6540b47c1366aa8faf74ffa5a8b7d Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>