Pull clk updates from Stephen Boyd:
 "This is the usual collection of primarily clk driver updates.

  The big part of the diff is all the new Qualcomm clk drivers added for
  a few SoCs they're working on. The other two vendors with significant
  work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
  to existing drivers and supports some new SoCs while Amlogic is
  starting a significant refactoring to simplify their code.

  The core framework gained a pair of helpers to get the 'struct device'
  or 'struct device_node' associated with a 'struct clk_hw'. Some
  associated KUnit tests were added for these simple helpers as well.

  Beyond that core change there are lots of little fixes throughout the
  clk drivers for the stuff we see every day, wrong clk driver data that
  affects tree topology or supported frequencies, etc. They're not found
  until the clks are actually used by some consumer device driver.

  New Drivers:
   - Global, display, gpu, video, camera, tcsr, and rpmh clock
     controller for the Qualcomm Milos SoC
   - Camera, display, GPU, and video clock controllers for Qualcomm
     QCS615
   - Video clock controller driver for Qualcomm SM6350
   - Camera clock controller driver for Qualcomm SC8180X
   - I3C clocks and resets on Renesas RZ/G3E
   - Expanded Serial Peripheral Interface (xSPI) clocks and resets on
     Renesas RZ/V2H(P) and RZ/V2N
   - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
   - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
   - Ethernet clocks and resets on Renesas RZ/G3E
   - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
     (R9A09G087) SoCs
   - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
   - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
     RZ/V2N

  Updates:
   - Support atomic PWMs in the PWM clk driver
   - clk_hw_get_dev() and clk_hw_get_of_node() helpers
   - Replace round_rate() with determine_rate() in various clk drivers
   - Convert clk DT bindings to DT schema format for DT validation
   - Various clk driver cleanups and refactorings from static analysis
     tools and possibly real humans
   - A lot of little fixes here and there to things like clk tree
     topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
  clk: clocking-wizard: Fix the round rate handling for versal
  clk: Fix typos
  clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
  clk: tegra: periph: Make tegra_clk_periph_ops static
  clk: tegra: periph: Fix error handling and resolve unsigned compare warning
  clk: imx: scu: convert from round_rate() to determine_rate()
  clk: imx: pllv4: convert from round_rate() to determine_rate()
  clk: imx: pllv3: convert from round_rate() to determine_rate()
  clk: imx: pllv2: convert from round_rate() to determine_rate()
  clk: imx: pll14xx: convert from round_rate() to determine_rate()
  clk: imx: pfd: convert from round_rate() to determine_rate()
  clk: imx: frac-pll: convert from round_rate() to determine_rate()
  clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
  clk: imx: fixup-div: convert from round_rate() to determine_rate()
  clk: imx: cpu: convert from round_rate() to determine_rate()
  clk: imx: busy: convert from round_rate() to determine_rate()
  clk: imx: composite-93: remove round_rate() in favor of determine_rate()
  clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
  clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
  clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
  ...

Implement reset support for SpacemiT CCUs.  A SpacemiT reset controller
device is an auxiliary device associated with a clock controller (CCU).

This patch defines the reset controllers for the MPMU, APBC, and MPMU
CCUs, which already define clock controllers.  It also adds RCPU, RCPU2,
and ACPB2 CCUs, which only define resets.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250702113709.291748-6-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>

The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
used in the BCM2712, AKA the RPi5. The RPi platforms
have typically used the ARCH_BCM2835, and the PCIe
support for this SoC can use this config which depends
on these drivers so enable building them when just that
arch option is enabled to ensure the platform works as
expected.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250630175301.846082-1-pbrobinson@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Fix trivial typo in the Kconfig entry for RESET_TH1520.

Fixes: 4a65326311ab ("reset: thead: Add TH1520 reset controller driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250601181000.166088-1-drew@pdp7.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.

Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC.
Enable control of USB2.0 PHY reset and power-down operations, including
assert and deassert functionalities for the PHY.

Leverage device tree (OF) data to support future SoCs with similar USB2PHY
hardware but varying register configurations. Define initialization values
and control register settings to ensure flexibility for upcoming platforms.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250415195131.281060-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add reset controller driver for the T-HEAD TH1520 SoC that manages
hardware reset lines for various subsystems. The driver currently
implements support for GPU reset control, with infrastructure in place
to extend support for NPU and Watchdog Timer resets in future updates.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-3-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add System Controller Firmware(SCU) reset driver for i.MX8QM and i.MX8QXP.
SCU Manage resets for peripherals such as MIPI CSI. Currently, support two
reset sources: IMX_SC_R_CSI_0 and IMX_SC_R_CSI_1.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-2-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Pull clk updates from Stephen Boyd:
 "The core framework gained a clk provider helper, a clk consumer
  helper, and some unit tests for the assigned clk rates feature in
  DeviceTree. On the vendor driver side, we gained a whole pile of SoC
  driver support detailed below. The majority in the diffstat is
  Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
  additions in here as well. The top vendors is quite common, but the
  sheer amount of new drivers is uncommon, so I'm anticipating a larger
  number of fixes for clk drivers this cycle.

  Core:
   - devm_clk_bulk_get_all_enabled() to return number of clks acquired
   - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
   - KUnit tests for clk-assigned-rates{,-u64}

  New Drivers:
   - Marvell PXA1908 SoC clks
   - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
   - TWL6030 clk driver
   - Nuvoton Arbel BMC NPCM8XX SoC clks
   - MediaTek MT6735 SoC clks
   - MediaTek MT7620, MT7628 and MT7688 MMC clks
   - Add a driver for gated fixed rate clocks
   - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
   - Camera, display and video clock controllers for Qualcomm SA8775P
     SoCs
   - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
     SAR2130P
   - Global, camera, display, GPU, and video clock controllers for
     Qualcomm SM8475 SoCs
   - RTC power domain and Battery Backup Function (VBATTB) clock support
     for the Renesas RZ/G3S SoC
   - Qualcomm IPQ9574 alpha PLLs
   - Support for i.MX91 CCM in the i.MX93 driver
   - Microchip LAN969X SoC clks
   - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
     reset on Renesas RZ/V2H(P)
   - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
   - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP

  Updates:
   - Convert more clk bindings to YAML
   - Various clk driver cleanups: NULL checks, add const, etc.
   - Remove END/NUM #defines that count number of clks in various
     binding headers
   - Continue moving reset drivers to drivers/reset via auxiliary bus"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
  clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
  clk: Fix invalid execution of clk_set_rate
  clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
  clk: lan966x: make it selectable for ARCH_LAN969X
  clk: eyeq: add EyeQ6H west fixed factor clocks
  clk: eyeq: add EyeQ6H central fixed factor clocks
  clk: eyeq: add EyeQ5 fixed factor clocks
  clk: eyeq: add fixed factor clocks infrastructure
  clk: eyeq: require clock index with phandle in all cases
  clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
  dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
  dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
  clk: clk-axi-clkgen: make sure to enable the AXI bus clock
  dt-bindings: clock: axi-clkgen: include AXI clk
  clk: mmp: Add Marvell PXA1908 MPMU driver
  clk: mmp: Add Marvell PXA1908 APMU driver
  clk: mmp: Add Marvell PXA1908 APBCP driver
  clk: mmp: Add Marvell PXA1908 APBC driver
  dt-bindings: clock: Add Marvell PXA1908 clock bindings
  clk: mmp: Switch to use struct u32_fract instead of custom one
  ...

* clk-samsung:
  clk: samsung: Introduce Exynos8895 clock driver
  clk: samsung: clk-pll: Add support for pll_{1051x,1052x}
  dt-bindings: clock: samsung: Add Exynos8895 SoC
  clk: samsung: gs101: make all ufs related clocks critical
  clk: samsung: exynosautov920: add peric1, misc and hsi0/1 clock support
  dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions
  clk: samsung: Fix out-of-bound access of of_match_node()
  dt-bindings: clock: samsung: remove define with number of clocks for FSD
  clk: samsung: fsd: do not define number of clocks in bindings
  clk: samsung: Fix errors reported by checkpatch
  clk: samsung: Fix block comment style warnings reported by checkpatch

* clk-microchip:
  clk: lan966x: add support for lan969x SoC clock driver
  clk: lan966x: prepare driver for lan969x support
  clk: lan966x: make clk_names const char * const
  dt-bindings: clock: add support for lan969x

* clk-imx:
  clk: imx: imx8-acm: Fix return value check in clk_imx_acm_attach_pm_domains()
  clk: imx: lpcg-scu: Skip HDMI LPCG clock save/restore
  clk: imx: clk-scu: fix clk enable state save and restore
  clk: imx: fracn-gppll: fix pll power up
  clk: imx: fracn-gppll: correct PLL initialization flow
  clk: imx: lpcg-scu: SW workaround for errata (e10858)
  clk: imx: add i.MX91 clk
  dt-bindings: clock: Add i.MX91 clock support
  dt-bindings: clock: imx93: Drop IMX93_CLK_END macro definition
  clk: imx93: Move IMX93_CLK_END macro to clk driver
  clk: imx95-blk-ctl: Add one clock gate for HSIO block
  dt-bindings: clock: nxp,imx95-blk-ctl: Add compatible string for i.MX95 HSIO BLK CTRL

* clk-amlogic:
  clk: amlogic: axg-audio: fix Kconfig dependency on RESET_MESON_AUX
  clk: amlogic: axg-audio: use the auxiliary reset driver
  reset: amlogic: Fix small whitespace issue
  reset: amlogic: add auxiliary reset driver support
  reset: amlogic: split the device core and platform probe
  reset: amlogic: move drivers to a dedicated directory
  reset: amlogic: add reset status support
  reset: amlogic: use reset number instead of register count
  reset: amlogic: add driver parameters
  reset: amlogic: make parameters unsigned
  reset: amlogic: use generic data matching function
  reset: amlogic: convert driver to regmap
  dt-bindings: clock: convert amlogic,meson8b-clkc.txt to dtschema
  clk: meson: meson8b: remove spinlock
  clk: meson: mpll: Delete a useless spinlock from the MPLL
  clk: meson: s4: pll: fix frac maximum value for hifi_pll
  clk: meson: c3: pll: fix frac maximum value for hifi_pll
  clk: meson: Support PLL with fixed fractional denominators
  clk: meson: s4: pll: hifi_pll support fractional multiplier

* clk-allwinner:
  clk: sunxi-ng: Use of_property_present() for non-boolean properties
  clk: sunxi-ng: d1: Fix PLL_AUDIO0 preset
  clk: sunxi-ng: Constify struct ccu_reset_map
  clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL