<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/reset/Makefile, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>reset: anlogic: add support for Anlogic DR1V90 resets</title>
<updated>2026-09-29T18:12:34+00:00</updated>
<author>
<name>Junhui Liu</name>
<email>junhui.liu@pigmoral.tech</email>
</author>
<published>2026-05-14T09:27:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9fd565971072d2d7158e15178f84b0273e294e70'/>
<id>9fd565971072d2d7158e15178f84b0273e294e70</id>
<content type='text'>
Add reset controller support for the Anlogic DR1V90 SoC, which is an
auxiliary device associated with the Clock and Reset Unit (CRU). All
resets are active-low.

Signed-off-by: Junhui Liu &lt;junhui.liu@pigmoral.tech&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Acked-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add reset controller support for the Anlogic DR1V90 SoC, which is an
auxiliary device associated with the Clock and Reset Unit (CRU). All
resets are active-low.

Signed-off-by: Junhui Liu &lt;junhui.liu@pigmoral.tech&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Acked-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile</title>
<updated>2026-08-17T16:28:08+00:00</updated>
<author>
<name>Stephen Boyd</name>
<email>sboyd@kernel.org</email>
</author>
<published>2026-08-14T00:42:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=df822f2e36cf2c2864d166d90cf002df4d8689e5'/>
<id>df822f2e36cf2c2864d166d90cf002df4d8689e5</id>
<content type='text'>
Pull clk patches from Brian Masney:

 - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
   UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
   bindings. Si549 support was added to the existing si544 driver.
 - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
   EN7523 PCIe PERSTOUT reset lines.
 - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
   the existing optional variant, and exports
   devm_clk_hw_register_composite_pdata() for modular drivers.
 - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
   support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
   charge pump/lock parameter programming during dynamic reconfiguration.
 - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
   the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
   gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
   registration failure, a prepare reference leak in the palmas driver,
   unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
   pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
   clocking-wizard clock difference detection bug.
 - Various cleanups across tegra, st, and mvebu providers to stop misusing the
   consumer clock API, along with other minor fixes and improvements.

Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;

* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  clk: aspeed: add AST2700 PECI clock
  dt-bindings: clock: ast2700: add PECI clock
  clk: mediatek: Add mt8173-mfgtop driver
  dt-bindings: clock: mediatek: Add mt8173 mfgtop
  clk: tegra: clean-up simple provider misuse of the consumer API
  clk: st: clean-up simple provider misuse of the consumer API
  clk: mvebu: clean-up simple provider misuse of the consumer API
  clk: remove conditional return with no effect
  clk: Add devm_clk_bulk_get_enable()
  clk: en7523: add support for dedicated PCIe PERSTOUT reset
  dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
  arm64: dts: cix: sky1: add audss cru
  reset: cix: add sky1 audss auxiliary reset driver
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull clk patches from Brian Masney:

 - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
   UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
   bindings. Si549 support was added to the existing si544 driver.
 - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
   EN7523 PCIe PERSTOUT reset lines.
 - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
   the existing optional variant, and exports
   devm_clk_hw_register_composite_pdata() for modular drivers.
 - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
   support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
   charge pump/lock parameter programming during dynamic reconfiguration.
 - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
   the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
   gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
   registration failure, a prepare reference leak in the palmas driver,
   unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
   pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
   clocking-wizard clock difference detection bug.
 - Various cleanups across tegra, st, and mvebu providers to stop misusing the
   consumer clock API, along with other minor fixes and improvements.

Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;

* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  clk: aspeed: add AST2700 PECI clock
  dt-bindings: clock: ast2700: add PECI clock
  clk: mediatek: Add mt8173-mfgtop driver
  dt-bindings: clock: mediatek: Add mt8173 mfgtop
  clk: tegra: clean-up simple provider misuse of the consumer API
  clk: st: clean-up simple provider misuse of the consumer API
  clk: mvebu: clean-up simple provider misuse of the consumer API
  clk: remove conditional return with no effect
  clk: Add devm_clk_bulk_get_enable()
  clk: en7523: add support for dedicated PCIe PERSTOUT reset
  dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
  arm64: dts: cix: sky1: add audss cru
  reset: cix: add sky1 audss auxiliary reset driver
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: cix: add sky1 audss auxiliary reset driver</title>
<updated>2026-07-28T15:25:30+00:00</updated>
<author>
<name>Joakim Zhang</name>
<email>joakim.zhang@cixtech.com</email>
</author>
<published>2026-07-23T09:08:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b5fa9d3beec483d125757127b804470941e191af'/>
<id>b5fa9d3beec483d125757127b804470941e191af</id>
<content type='text'>
Add an auxiliary reset controller driver for the AUDSS CRU. Sixteen
software reset lines for audio subsystem peripherals are controlled
through one register in the CRU register map.

The driver is created by the AUDSS clock platform driver and registers
the reset controller on the CRU device node.

Signed-off-by: Joakim Zhang &lt;joakim.zhang@cixtech.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Acked-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add an auxiliary reset controller driver for the AUDSS CRU. Sixteen
software reset lines for audio subsystem peripherals are controlled
through one register in the CRU register map.

The driver is created by the AUDSS clock platform driver and registers
the reset controller on the CRU device node.

Signed-off-by: Joakim Zhang &lt;joakim.zhang@cixtech.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Acked-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: eswin: Add eic7700 HSP reset driver</title>
<updated>2026-06-29T17:18:20+00:00</updated>
<author>
<name>Xuyang Dong</name>
<email>dongxuyang@eswincomputing.com</email>
</author>
<published>2026-06-05T06:14:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b37fe0ee3691b9da358cdfbbdad67874e562ac90'/>
<id>b37fe0ee3691b9da358cdfbbdad67874e562ac90</id>
<content type='text'>
Add auxiliary driver to support ESWIN EIC7700 high-speed peripherals
system. The reset controller is created using the auxiliary device
framework and set up in the clock driver.

Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Xuyang Dong &lt;dongxuyang@eswincomputing.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add auxiliary driver to support ESWIN EIC7700 high-speed peripherals
system. The reset controller is created using the auxiliary device
framework and set up in the clock driver.

Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Xuyang Dong &lt;dongxuyang@eswincomputing.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux</title>
<updated>2026-04-21T15:33:26+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-04-21T15:33:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4ee64205ffaa587e8114d84a67ac721399ccb369'/>
<id>4ee64205ffaa587e8114d84a67ac721399ccb369</id>
<content type='text'>
Pull clk updates from Stephen Boyd:
 "We've finally gotten rid of the struct clk_ops::round_rate() code
  after months of effort from Brian Masney. Now the only option is to
  use determine_rate(), which is good because that takes a struct
  argument instead of just a couple unsigned longs, allowing us to
  easily modify the way we determine and set rates in the clk tree.

  Beyond that core framework change we've got the typical pile of new
  SoC clk driver additions, fixes for clk data and/or adding missing
  clks because the consumer driver using those clks wasn't ready, etc.
  The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
  Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
  eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
  pretty normal.

  Core:
   - Remove the round_rate() clk op (yay!)

  New Drivers:
   - ESWIN eic700 SoC clk support
   - Econet EN751221 SoC clock/reset support
   - Global TCSR, RPMh, and display clock controller support for the
     Qualcomm Eliza platform
   - TCSR, the multiple global, and the RPMh clock controller support
     for the Qualcomm Nord platform
   - GPU clock controller support for Qualcomm SM8750
   - Video and GPU clock controller support for Qualcomm Glymur
   - Global clock controller support for Qualcomm IPQ5210
   - Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
     controllers on the SoC
   - ExynosAutov920: Add G3D (GPU) clock controller
   - Clock driver for the Rockchip RV1103B SoC
   - Initial support for the Renesas RZ/G3L (R9A08G046) SoC
   - Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
  clk: visconti: pll: initialize clk_init_data to zero
  clk: fsl-sai: Add MCLK generation support
  clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
  dt-bindings: clock: fsl-sai: Document clock-cells = &lt;1&gt; support
  clk: fsl-sai: Add i.MX8M support with 8 byte register offset
  clk: fsl-sai: Sort the headers
  dt-bindings: clock: fsl-sai: Document i.MX8M support
  clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
  clk: qcom: rpmh: Add support for Nord rpmh clocks
  clk: qcom: Add TCSR clock driver for Nord SoC
  dt-bindings: clock: qcom: Add Nord Global Clock Controller
  dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
  dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
  clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
  clk: qcom: Constify list of critical CBCR registers
  clk: qcom: Constify qcom_cc_driver_data
  clk: qcom: videocc-glymur: Constify qcom_cc_desc
  clk: qcom: Add a driver for SM8750 GPU clocks
  dt-bindings: clock: qcom: Add SM8750 GPU clocks
  clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull clk updates from Stephen Boyd:
 "We've finally gotten rid of the struct clk_ops::round_rate() code
  after months of effort from Brian Masney. Now the only option is to
  use determine_rate(), which is good because that takes a struct
  argument instead of just a couple unsigned longs, allowing us to
  easily modify the way we determine and set rates in the clk tree.

  Beyond that core framework change we've got the typical pile of new
  SoC clk driver additions, fixes for clk data and/or adding missing
  clks because the consumer driver using those clks wasn't ready, etc.
  The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
  Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
  eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
  pretty normal.

  Core:
   - Remove the round_rate() clk op (yay!)

  New Drivers:
   - ESWIN eic700 SoC clk support
   - Econet EN751221 SoC clock/reset support
   - Global TCSR, RPMh, and display clock controller support for the
     Qualcomm Eliza platform
   - TCSR, the multiple global, and the RPMh clock controller support
     for the Qualcomm Nord platform
   - GPU clock controller support for Qualcomm SM8750
   - Video and GPU clock controller support for Qualcomm Glymur
   - Global clock controller support for Qualcomm IPQ5210
   - Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
     controllers on the SoC
   - ExynosAutov920: Add G3D (GPU) clock controller
   - Clock driver for the Rockchip RV1103B SoC
   - Initial support for the Renesas RZ/G3L (R9A08G046) SoC
   - Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
  clk: visconti: pll: initialize clk_init_data to zero
  clk: fsl-sai: Add MCLK generation support
  clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
  dt-bindings: clock: fsl-sai: Document clock-cells = &lt;1&gt; support
  clk: fsl-sai: Add i.MX8M support with 8 byte register offset
  clk: fsl-sai: Sort the headers
  dt-bindings: clock: fsl-sai: Document i.MX8M support
  clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
  clk: qcom: rpmh: Add support for Nord rpmh clocks
  clk: qcom: Add TCSR clock driver for Nord SoC
  dt-bindings: clock: qcom: Add Nord Global Clock Controller
  dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
  dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
  clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
  clk: qcom: Constify list of critical CBCR registers
  clk: qcom: Constify qcom_cc_driver_data
  clk: qcom: videocc-glymur: Constify qcom_cc_desc
  clk: qcom: Add a driver for SM8750 GPU clocks
  dt-bindings: clock: qcom: Add SM8750 GPU clocks
  clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: tenstorrent: Add reset controller for Atlantis</title>
<updated>2026-03-10T03:10:26+00:00</updated>
<author>
<name>Anirudh Srinivasan</name>
<email>asrinivasan@oss.tenstorrent.com</email>
</author>
<published>2026-03-06T17:12:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=89b23af16276a6d4d06064d72e3fd548de090375'/>
<id>89b23af16276a6d4d06064d72e3fd548de090375</id>
<content type='text'>
Adds Atlantis Reset Controller driver, which shares the same regmap as
prcm ( clock controller).

This version of the reset controller driver covers resets from the RCPU
prcm.

Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Acked-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Anirudh Srinivasan &lt;asrinivasan@oss.tenstorrent.com&gt;
Reviewed-by: Drew Fustini &lt;fustini@kernel.org&gt;
Signed-off-by: Drew Fustini &lt;fustini@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Adds Atlantis Reset Controller driver, which shares the same regmap as
prcm ( clock controller).

This version of the reset controller driver covers resets from the RCPU
prcm.

Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Acked-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Anirudh Srinivasan &lt;asrinivasan@oss.tenstorrent.com&gt;
Reviewed-by: Drew Fustini &lt;fustini@kernel.org&gt;
Signed-off-by: Drew Fustini &lt;fustini@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: add Sky1 soc reset support</title>
<updated>2026-03-09T11:07:11+00:00</updated>
<author>
<name>Gary Yang</name>
<email>gary.yang@cixtech.com</email>
</author>
<published>2026-03-02T06:44:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7cd3ca90d92110cb6a57fcc286c193cf7fd048d2'/>
<id>7cd3ca90d92110cb6a57fcc286c193cf7fd048d2</id>
<content type='text'>
Add support for the resets on Cix's Sky1 SoC.
There are two reset controllers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.

Signed-off-by: Gary Yang &lt;gary.yang@cixtech.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for the resets on Cix's Sky1 SoC.
There are two reset controllers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.

Signed-off-by: Gary Yang &lt;gary.yang@cixtech.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: Create subdirectory for SpacemiT drivers</title>
<updated>2026-01-24T15:53:02+00:00</updated>
<author>
<name>Guodong Xu</name>
<email>guodong@riscstar.com</email>
</author>
<published>2026-01-20T11:10:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=2875b4b5d2657ff2fd979103d88e9afcae51481c'/>
<id>2875b4b5d2657ff2fd979103d88e9afcae51481c</id>
<content type='text'>
Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.

Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.

Also sort the drivers/reset/Kconfig entries alphabetically.

Reviewed-by: Alex Elder &lt;elder@riscstar.com&gt;
Signed-off-by: Guodong Xu &lt;guodong@riscstar.com&gt;
Reviewed-by: Yixun Lan &lt;dlan@kernel.org&gt;
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.

Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.

Also sort the drivers/reset/Kconfig entries alphabetically.

Reviewed-by: Alex Elder &lt;elder@riscstar.com&gt;
Signed-off-by: Guodong Xu &lt;guodong@riscstar.com&gt;
Reviewed-by: Yixun Lan &lt;dlan@kernel.org&gt;
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: eswin: Add eic7700 reset driver</title>
<updated>2025-11-18T16:52:54+00:00</updated>
<author>
<name>Xuyang Dong</name>
<email>dongxuyang@eswincomputing.com</email>
</author>
<published>2025-09-30T09:32:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0884bd97c08cfad9c23166ddee953498cf535284'/>
<id>0884bd97c08cfad9c23166ddee953498cf535284</id>
<content type='text'>
Add support for reset controller in eic7700 series chips.
Provide functionality for asserting and deasserting resets
on the chip.

Signed-off-by: Yifeng Huang &lt;huangyifeng@eswincomputing.com&gt;
Signed-off-by: Xuyang Dong &lt;dongxuyang@eswincomputing.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for reset controller in eic7700 series chips.
Provide functionality for asserting and deasserting resets
on the chip.

Signed-off-by: Yifeng Huang &lt;huangyifeng@eswincomputing.com&gt;
Signed-off-by: Xuyang Dong &lt;dongxuyang@eswincomputing.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>reset: aspeed: register AST2700 reset auxiliary bus device</title>
<updated>2025-08-14T10:17:45+00:00</updated>
<author>
<name>Ryan Chen</name>
<email>ryan_chen@aspeedtech.com</email>
</author>
<published>2025-07-08T05:29:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9c50f99c135384a4c1918e267c706f196820b214'/>
<id>9c50f99c135384a4c1918e267c706f196820b214</id>
<content type='text'>
The AST2700 reset driver is registered as an auxiliary device
due to reset and clock controller share the same register region.

Signed-off-by: Ryan Chen &lt;ryan_chen@aspeedtech.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Link: https://lore.kernel.org/r/20250708052909.4145983-3-ryan_chen@aspeedtech.com
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The AST2700 reset driver is registered as an auxiliary device
due to reset and clock controller share the same register region.

Signed-off-by: Ryan Chen &lt;ryan_chen@aspeedtech.com&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Link: https://lore.kernel.org/r/20250708052909.4145983-3-ryan_chen@aspeedtech.com
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
</feed>
