linux-toradex.git/drivers/rtc/Kconfig, branch v4.12

rtc: sh: add support for rza series

2017-04-03T16:01:34+00:00

This same RTC is used in RZ/A series MPUs, therefore with some slight
changes, this driver can be reused. Additionally, since ARM architectures
require Device Tree configurations, device tree support has been added.

Signed-off-by: Chris Brandt 
Reviewed-by: Geert Uytterhoeven 
Signed-off-by: Alexandre Belloni

rtc: cpcap: new rtc driver

2017-03-09T00:32:35+00:00

This driver supports the Motorola CPCAP PMIC found on
some of Motorola's mobile phones, such as the Droid 4.

Tested-by: Tony Lindgren 
Signed-off-by: Sebastian Reichel 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

Merge tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2017-02-28T03:59:21+00:00

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - constify rtc_class_ops structures

 New driver:
   - STM32

 Drivers:
   - armada38x: fix errata, Armada 7K/8K support
   - ds3232: fix wakeup support
   - gemini: DT support
   - m48t86: huge cleanup and platform_data removal
   - mcp795: alarm support
   - sun6i: proper oscillator handling
   - tegra: proper clock handling
   - tps65910: calibration support"

* tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits)
  rtc: ds3232: Call device_init_wakeup before device_register
  rtc: pcf2127: bulk read only date and time registers.
  rtc: armada38x: Add support for Armada 7K/8K
  rtc: armada38x: Prepare driver to manage different versions
  rtc: ds3232: Add regmap max_register definition.
  rtc: ds3232: Cleanup whitespace around register and bit definitions.
  rtc: m48t86: remove unused platform_data
  ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources
  ARM: Orion5x: ts78xx: remove RTC detection
  ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources
  rtc: m48t86: verify that the RTC is actually present
  rtc: m48t86: add NVRAM support
  rtc: m48t86: allow driver to manage its resources
  rtc: m48t86: shorten register name defines
  bindings: rtc: correct wrong reference in required properties
  rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
  rtc: sun6i: extend test coverage
  rtc: sun6i: Fix compatibility with old DT binding
  rtc: snvs: add a missing write sync
  rtc: bq32000: add support to enable disable the trickle charge FET bypass
  ...

rtc: sun6i: extend test coverage

2017-02-01T12:55:07+00:00

COMPILE_TEST was wrongly placed, move it to the "depends on" line.
Also depend on COMMON_CLK as the driver now needs it to be properly
compiled.

Signed-off-by: Alexandre Belloni

rtc: jz4740: make the driver buildable as a module again

2017-01-26T22:03:21+00:00

By using kernel_halt() instead of machine_halt(), we can make the driver
build as a module.
However, jz4740 platforms not loading this module will not be able to power
off.

Suggested-by: Geert Uytterhoeven 
Signed-off-by: Alexandre Belloni 

Revert "rtc: jz4740: make the driver builtin only"

This reverts commit b9168c539c0b2de756aaffd380384dbde8adbe07.

rtc: sun6i: Disable the build as a module

2017-01-24T17:45:29+00:00

Since we have to provide the clock very early on, the RTC driver cannot be
built as a module. Make sure that won't happen.

Cc: stable@vger.kernel.org
Signed-off-by: Maxime Ripard 
Signed-off-by: Alexandre Belloni

rtc: add STM32 RTC driver

2017-01-13T00:40:31+00:00

This patch adds support for the STM32 RTC.

Signed-off-by: Amelie Delaunay 
Reviewed-by: Mathieu Poirier 
Signed-off-by: Alexandre Belloni

rtc: add support for EPSON TOYOCOM RTC-7301SF/DG

2016-12-18T23:59:21+00:00

This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.

Signed-off-by: Akinobu Mita 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

rtc: twl: make driver DT only

2016-11-30T20:21:33+00:00

Since there are no platform based users and all users
of this code are TI OMAP-based which is DT only, it makes
sense to remove unused code.

Signed-off-by: Nicolae Rosia 
Tested-by: Tony Lindgren 
Signed-off-by: Alexandre Belloni

rtc: fix typos in Kconfig

2016-11-09T00:37:04+00:00

s/buillt/built/g

Signed-off-by: Alexandre Belloni