Add a RTC driver for NXP S32G2/S32G3 SoCs.

RTC tracks clock time during system suspend. It can be a wakeup source
for the S32G2/S32G3 SoC based boards.

The RTC module from S32G2/S32G3 is not battery-powered and it is not kept
alive during system reset.

Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Link: https://lore.kernel.org/r/20250403103346.3064895-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Implement the RTC driver for CV1800, which able to provide time alarm.

Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250507195626.502240-1-alexander.sverdlin@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074640.81363-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-3-linux@treblig.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Merely enabling compile-testing should not enable additional
functionality.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/7b8eefe3b0150101ba01c3ea55e45aa3134059ba.1733243007.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

This is the third amlogic driver. The RTC hardware of A4 SoC is different
from the previous one. This RTC hardware includes a timing function and
an alarm function. But the existing has only timing function, alarm
function is using the system clock to implement a virtual alarm. Add
the RTC driver to support it.

Signed-off-by: Yiting Deng <yiting.deng@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20241112-rtc-v6-2-a71b60d2f354@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the samsung,coreprimevelte smartphone which contains this PMIC and
whose vendor kernel tree has also served as the sole reference for this.

Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20241012193345.18594-2-balejk@matfyz.cz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Switch the i2c_transfer methods to regmap APIs.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20241010084949.3351182-3-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The RTC IP (RTCA-3) available on the Renesas RZ/G3S SoC has calendar count
mode and binary count mode (selectable though RCR2.CNTMD) capabilities,
alarm capabilities, clock error correction capabilities. It can generate
alarm, period, carry interrupts.

Add a driver for RTCA-3 IP. The driver implements calendar count mode (as
the conversion b/w RTC and system time is simpler, done with bcd2bin(),
bin2bcd()), read and set time, read and set alarm, read and set
an offset.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241030110120.332802-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull RTC updates from Alexandre Belloni:
 "More conversions of DT bindings to yaml. There is one new driver, for
  the DFRobot SD2405AL and support for important features of the stm32
  RTC. Summary:

  New driver:
   - DFRobot SD2405AL

  Drivers:
   - stm32: add alarm A out and LSCO support
   - sun6i: disable automatic clock input switching
   - m48t59: set range"

* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: rc5t619: use proper module tables
  rtc: m48t59: set range
  dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
  rtc: m48t59: Remove division condition with direct comparison
  rtc: at91sam9: fix OF node leak in probe() error path
  rtc: sun6i: disable automatic clock input switching
  dt-bindings: rtc: Drop non-trivial duplicate compatibles
  dt-bindings: vendor-prefixes: Add DFRobot.
  dt-bindings: rtc: Add support for SD2405AL.
  rtc: Add driver for SD2405AL
  rtc: s35390a: Drop vendorless compatible string from match table
  rtc: twl: convert comma to semicolon
  dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
  rtc: stm32: add alarm A out feature
  rtc: stm32: add Low Speed Clock Output (LSCO) support
  rtc: stm32: add pinctrl and pinmux interfaces
  dt-bindings: rtc: stm32: describe pinmux nodes