Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Amlogic A4 and A5 RTC
   - Marvell 88PM886 PMIC RTC
   - Renesas RTCA-3 for Renesas RZ/G3S

  Driver updates:
   - ab-eoz9: fix temperature and alarm support
   - cmos: improve locking behaviour
   - isl12022: add alarm support
   - m48t59: improve epoch handling
   - mt6359: add range
   - rzn1: fix BCD conversions and simplify driver"

* tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits)
  rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
  rtc: rzn1: reduce register access
  rtc: rzn1: drop superfluous wday calculation
  m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
  rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
  rtc: m48t59: Use platform_data struct for year offset value
  rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
  rtc: rv3028: fix RV3028_TS_COUNT type
  rtc: rzn1: update Michel's email
  rtc: rzn1: fix BCD to rtc_time conversion errors
  rtc: amlogic-a4: fix compile error
  rtc: amlogic-a4: drop error messages
  MAINTAINERS: Add an entry for Amlogic RTC driver
  rtc: support for the Amlogic on-chip RTC
  dt-bindings: rtc: Add Amlogic A4 and A5 RTC
  rtc: add driver for Marvell 88PM886 PMIC RTC
  rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
  rtc: pcf8563: Switch to regmap
  rtc: pcf8563: Sort headers alphabetically
  rtc: abx80x: Fix WDT bit position of the status register
  ...

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/rtc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241007205803.444994-6-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230304133028.2135435-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which the
driver can take into account.

Add support for storing a 32-bit offset from the Epoch in an nvmem cell
so that the RTC time can be set on such platforms.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-18-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

For consistency with the rest of the driver, drop the last two error
messages for conditions that should only occur during development, if
ever.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-16-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Clean up local declarations somewhat by using the reverse xmas style
consistently throughout.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-15-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

In preparation for adding support for setting the time by means of an
externally stored offset, refactor read_time() by adding a new helper
that can be used to retrieve the raw time as stored in the RTC.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-14-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The PMIC RTC registers are 32-bit so explicitly use u32 rather than
unsigned long for timestamps to reflect the hardware.

This will also help avoid unintentional range extensions when adding
support for managing an external offset.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-13-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Clean up the driver comments somewhat and remove obsolete, incorrect or
redundant ones.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-12-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>