linux-toradex.git/drivers/rtc/rtc-s3c.c, branch v3.15

drivers/rtc/rtc-s3c.c: remove NO_IRQ macro

2014-04-03T23:21:24+00:00

NO_IRQ may be defined as '(unsigned int) -1' in some architectures (arm,
sh ...), and either may not be defined in some architectures (arm64) which
can enable RTC_DRV_S3C.

Also since platform_get_irq returns err-code in case of any error, we do
not need to intialize s3c_rtc_alarmno and s3c_rtc_tickno.

Signed-off-by: Pankaj Dubey 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX

2014-03-04T15:55:48+00:00

On exynos5250, exynos5420 and exynos5260 it was observed that, after 1
cycle of S2R, the rtc-tick occurs at a very fast rate as compared to the
rtc-tick occuring before S2R.

This patch fixes the above issue by correcting the wrong way of
save/restore of S3C2410_TICNT for TYPE_S3C64XX.

Signed-off-by: Vikas Sajjan 
Cc: Grant Likely 
Cc: Rob Herring 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: rtc-s3c: remove unnecessary platform_set_drvdata()

2013-07-03T23:07:51+00:00

The driver core clears the driver data to NULL after device_release or
on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound").  Thus, it is not needed to manually
clear the device driver data to NULL.

Signed-off-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rtc: don't check resource with devm_ioremap_resource

2013-05-18T09:57:07+00:00

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang 
Acked-by: Stephen Warren

Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-02T16:38:16+00:00

Pull ARM SoC multiplatform updates from Olof Johansson:
 "More multiplatform enablement for ARM platforms.  The ones converted
  in this branch are:

   - bcm2835
   - cns3xxx
   - sirf
   - nomadik
   - msx
   - spear
   - tegra
   - ux500

  We're getting close to having most of them converted!

  One of the larger platforms remaining is Samsung Exynos, and there are
  a bunch of supporting patches in this merge window for it.  There was
  a patch in this branch to a early version of multiplatform conversion,
  but it ended up being reverted due to need of more bake time.  The
  revert commit is part of the branch since it would have required
  rebasing multiple dependent branches and they were stable by then"

* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
  clocksource: nomadik-mtu: fix up clocksource/timer
  Revert "ARM: exynos: enable multiplatform support"
  ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
  ARM: exynos: enable multiplatform support
  rtc: s3c: make header file local
  mtd: onenand/samsung: make regs-onenand.h file local
  thermal/exynos: remove unnecessary header inclusions
  mmc: sdhci-s3c: remove platform dependencies
  ARM: samsung: move mfc device definition to s5p-dev-mfc.c
  ARM: exynos: move debug-macro.S to include/debug/
  ARM: exynos: prepare for sparse IRQ
  ARM: exynos: introduce EXYNOS_ATAGS symbol
  ARM: tegra: build assembly files with -march=armv7-a
  ARM: Push selects for TWD/SCU into machine entries
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of 
  ...

drivers/rtc/rtc-s3c.c: use clk_prepare_enable and clk_disable_unprepare

2013-04-30T01:28:35+00:00

Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.

Signed-off-by: Thomas Abraham 
Signed-off-by: Vivek Gautam 
Reviewed-by: Sylwester Nawrocki 
Reviewed-by: Jingoo Han 
Acked-by: Kukjin Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rtc/rtc-s3c.c: convert s3c_rtc to dev_pm_ops

2013-04-30T01:28:28+00:00

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.  Also, 'wake_en'
variable is moved, because it is only used when CONFIG_PM_SLEEP is
enabled.

Signed-off-by: Jingoo Han 
Cc: Grant Likely 
Cc: Rob Herring 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: rtc-s3c: use devm_rtc_device_register()

2013-04-30T01:28:27+00:00

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: s3c: make header file local

2013-04-19T11:51:25+00:00

Nothing outside of the rtc driver includes plat/regs-rtc.h,
so we can simply move the file into the same directory,
which allows us to build the file as platform-independent
code.

Signed-off-by: Arnd Bergmann 
Cc: rtc-linux@googlegroups.com
Cc: Alessandro Zummo

Merge branch 'akpm' (incoming from Andrew)

2013-02-22T01:38:49+00:00

Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...