linux-toradex.git/drivers/rtc/rtc-sa1100.c, branch v3.2.38

RTC: sa1100: Update the sa1100 RTC driver.

2011-03-09T19:25:08+00:00

Since PIE interrupts are now emulated, this patch removes the previous
code that used the hardware counters.

The removal of read_callback() also fixes a wrong user space behaviour
of this driver, which was not returning the right value to read().

[john.stultz: Merge fixups]

CC: Thomas Gleixner 
CC: Alessandro Zummo 
CC: Marcelo Roberto Jimenez 
CC: rtc-linux@googlegroups.com
Signed-off-by: Marcelo Roberto Jimenez 
Signed-off-by: John Stultz

RTC: Remove UIE and PIE information from the sa1100 driver proc.

2011-03-09T19:25:05+00:00

This patch removes the UIE and PIE information that is now being
supplied directly in the generic RTC code.

CC: Thomas Gleixner 
CC: Alessandro Zummo 
CC: Marcelo Roberto Jimenez 
CC: rtc-linux@googlegroups.com
Signed-off-by: Marcelo Roberto Jimenez 
Signed-off-by: John Stultz

RTC: Clean out UIE icotl implementations

2011-03-09T19:24:54+00:00

With the generic RTC rework, the UIE mode irqs are handled
in the generic layer, and only hardware specific ioctls
get passed down to the rtc driver layer.

So this patch removes the UIE mode ioctl handling in the rtc
driver layer, which never get used.

CC: Thomas Gleixner 
CC: Alessandro Zummo 
CC: Marcelo Roberto Jimenez 
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz

RTC: Cleanup rtc_class_ops->irq_set_freq()

2011-03-09T19:23:35+00:00

With the generic rtc code now emulating PIE mode irqs via an
hrtimer, no one calls the rtc_class_ops->irq_set_freq call.

This patch removes the hook and deletes the driver functions
if no one else calls them.

CC: Thomas Gleixner 
CC: Alessandro Zummo 
CC: Marcelo Roberto Jimenez 
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz

RTC: Cleanup rtc_class_ops->irq_set_state

2011-03-09T19:23:34+00:00

With PIE mode interrupts now emulated in generic code via an hrtimer,
no one calls rtc_class_ops->irq_set_state(), so this patch removes it
along with driver implementations.

CC: Thomas Gleixner 
CC: Alessandro Zummo 
CC: Marcelo Roberto Jimenez 
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz

RTC: Convert rtc drivers to use the alarm_irq_enable method

2011-02-03T21:02:35+00:00

Some rtc drivers use the ioctl method instead of the alarm_irq_enable
method for enabling alarm interupts. With the new virtualized RTC
rework, its important for drivers to use the alarm_irq_enable instead.

This patch converts the drivers that use the AIE ioctl method to
use the alarm_irq_enable method. Other ioctl cmds are left untouched.

I have not been able to test or even compile most of these drivers.
Any help to make sure this change is correct would be appreciated!

CC: Alessandro Zummo 
CC: Thomas Gleixner 
CC: Marcelo Roberto Jimenez 
Reported-by: Marcelo Roberto Jimenez 
Tested-by: Marcelo Roberto Jimenez 
Signed-off-by: John Stultz

ARM: 6455/2: Better use of the RTC framework for sa11xx.

2010-12-21T14:53:43+00:00

This patch uses the RTC framework to treat some common ioctl.

In particular, it fixes the behaviour of rtc_irq_set_freq(), which did
not work as expected because the timer was not beeing retriggered.

Signed-off-by: Marcelo Roberto Jimenez 
Signed-off-by: Russell King

ARM: 6454/1: sa1100: Fix for a nasty initialization bug in the RTSR.

2010-11-10T13:34:45+00:00

This patch fixes a nasty initialization condition on the RTSR register.
Sometimes, bit 1 will wake up set, sometimes not. This can be seen
by checking the value of the RTSR by typing '$ cat /proc/driver/rtc',
which has been provided by the previous patch.

If this bit is set, the command '$ cat /dev/rtc0' will lock the system
in an endless interrupt routine calling loop.

This patch fixes the issue both at sa1100_rtc_probe(), where it avoids
a spurious interrupt from happening, and at sa1100_rtc_interrupt(),
which is the robust solution, though it does not avoid the first
spurious interrupt.

Signed-off-by: Marcelo Roberto Jimenez 
Signed-off-by: Russell King

ARM: 6453/1: sa1100: Print the value of RTSR on /proc/drivers/rtc.

2010-11-10T13:34:26+00:00

This patch adds a line to the output of /proc/drivers/rtc to show
the value of the RTSR register. It will be used to demonstrate
a nasty initialization bug that will be fixed in the sequence.

Signed-off-by: Marcelo Roberto Jimenez 
Signed-off-by: Russell King

ARM: 6452/1: Fix checkpatch.pl issues in drivers/rtc/rtc-sa1100.c.

2010-11-10T13:34:09+00:00

This patch fixes checkpatch.pl issues in drivers/rtc/rtc-sa1100.c,
which I will later modify.

Signed-off-by: Marcelo Roberto Jimenez 
Signed-off-by: Russell King