linux-toradex.git/drivers/rtc/rtc-stmp3xxx.c, branch v4.4.35

rtc: stmp3xxx: unify register access macros

2015-11-08T13:12:27+00:00

Use STMP_OFFSET_REG_(SET|CLR) instead of defining _SET and _CLR for
STMP3XXX_RTC_CTRL and STMP3XXX_RTC_PERSISTENT0 - no functional changes.

Signed-off-by: Harald Geyer 
Signed-off-by: Alexandre Belloni

rtc: stmp3xxx: use optional crystal in low power states

2015-04-17T13:03:59+00:00

The rtc's status register allows to determine if a 32k crystal is
connected to keep the rtc running in low power states provided the
corresponding fuse bits were blown correctly during production.  (In case
they were not, the right frequency can be stated in the device tree.) If
there is no such crystal available force the 24 MHz XTAL clock to keep
running to retain the right date and time.  Otherwise use the crystal to
save some power.

It would be nice to only switch to the crystal when the XTAL clock is
about to be disabled and keep the crystal off when unneeded because XTAL
is always on while the chip is powered on.  But as sudden power loss isn't
detectable this is not save.

Signed-off-by: Uwe Kleine-König 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: drop owner assignment from platform_drivers

2014-10-20T14:21:31+00:00

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang

drivers/rtc/rtc-stmp3xxx.c: remove redundant of_match_ptr

2013-11-13T03:09:30+00:00

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit

2013-08-14T00:57:48+00:00

It's always a bad idea to poll on HW bits without a timeout.

The i.MX28 RTC can be easily brought into a state in which the RTC is
not running (until after a power-on-reset) and thus the status bits
which are polled in the driver won't ever change.

This patch prevents the kernel from getting stuck in this case.

Signed-off-by: Lothar Waßmann 
Acked-by: Wolfram Sang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rtc/rtc-stmp3xxx.c: check the return value from stmp_reset_block()

2013-07-09T17:33:25+00:00

stmp_reset_block() may fail, so let's check its return value and
propagate it in the case of error.

Signed-off-by: Fabio Estevam 
Acked-by: Shawn Guo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: rtc-stmp3xxx: remove unnecessary platform_set_drvdata()

2013-07-03T23:07:52+00:00

The driver core clears the driver data to NULL after device_release or
on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound").  Thus, it is not needed to manually
clear the device driver data to NULL.

Signed-off-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-02T16:03:55+00:00

Pull ARM SoC cleanup from Olof Johansson:
 "Here is a collection of cleanup patches.  Among the pieces that stand
  out are:

   - The deletion of h720x platforms
   - Split of at91 non-dt platforms to their own Kconfig file to keep
     them separate
   - General cleanups and refactoring of i.MX and MXS platforms
   - Some restructuring of clock tables for OMAP
   - Convertion of PMC driver for Tegra to dt-only
   - Some renames of sunxi -> sun4i (Allwinner A10)
   - ... plus a bunch of other stuff that I haven't mentioned"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: i.MX: remove unused ARCH_* configs
  ARM i.MX53: remove platform ahci support
  ARM: sunxi: Rework the restart code
  irqchip: sunxi: Rename sunxi to sun4i
  irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
  clocksource: sunxi: Rename sunxi to sun4i
  clocksource: sunxi: make use of CLKSRC_OF
  clocksource: sunxi: Cleanup the timer code
  ARM: at91: remove trailing semicolon from macros
  ARM: at91/setup: fix trivial typos
  ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
  ARM: EXYNOS: change the name of USB ohci header
  ARM: SAMSUNG: Remove unnecessary code for dma
  ARM: S3C24XX: Remove unused GPIO drive strength register definitions
  ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
  ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
  ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
  ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
  ...

rtc: rtc-stmp3xxx: convert stmp3xxx_rtcdrv to dev_pm_ops

2013-04-30T01:28:40+00:00

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: rtc-stmp3xxx: use devm_*() functions

2013-04-30T01:28:39+00:00

Use devm_*() functions to make cleanup paths simpler.

Signed-off-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds