linux-toradex.git/drivers/rtc/rtc-x1205.c, branch v3.4.97

rtc: convert rtc i2c drivers to module_i2c_driver

2012-03-23T23:58:39+00:00

Factor out some boilerplate code for i2c driver registration into
module_i2c_driver.

Signed-off-by: Axel Lin 
Cc: Piotr Ziecik 
Cc: Alessandro Zummo 
Cc: Scott Wood 
Cc: Srikanth Srinivasan 
Cc: Mike Rapoport 
Cc: Sergey Lapin 
Cc: Roman Fietze 
Cc: Herbert Valerio Riedel 
Cc: Alexander Bigga 
Cc: Dale Farnsworth 
Cc: Gregory Hermant 
Cc: Wolfgang Grandegger 
Cc: Martyn Welch 
Cc: Byron Bradley 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: Add module.h to implicit users in drivers/rtc

2011-10-31T23:31:28+00:00

The module.h was implicitly everywhere, but when we clean
that up, the implicit users will compile fail; fix them up
in advance.

Signed-off-by: Paul Gortmaker

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

rtc-x1205: unconditionally set date when setting clock

2009-12-16T15:20:00+00:00

All callsites of x1205_set_datetime() want the date to be set as well, so
remove the flag parameter and set it unconditionally.

Signed-off-by: Johannes Weiner 
Cc: Alessandro Zummo 
Cc: Paul Gortmaker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc-x1205: reset clock to sane state after power failure

2009-12-02T00:32:20+00:00

When detecting power failure, the probe function would reset the clock
time to defined state.

However, the clock's _date_ might still be bogus and a subsequent probe
fails when sanity-checking these values.

Change the power-failure fixup code to do a full setting of rtc_time,
including a valid date.

Signed-off-by: Johannes Weiner 
Cc: Alessandro Zummo 
Cc: Paul Gortmaker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc-x1205: fix rtc_time to y2k register value conversion

2009-12-02T00:32:20+00:00

The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's
tm_year is in years since 1900.

The function translating rtc_time to register values assumes tm_year to be
years since first christmas, though, and we end up storing 0 or 1 in the
CCR_Y2K register, which the hardware does not refuse to do.

A subsequent probing of the clock fails due to the invalid value range in
the register, though.

[ And if it didn't, reading the clock would yield a bogus year because
  the function translating registers to tm_year is assuming a register
  value of 19 or 20. ]

This fixes the conversion from years since 1900 in tm_year to the
corresponding CCR_Y2K value of 19 or 20.

Signed-off-by: Johannes Weiner 
Cc: Alessandro Zummo 
Cc: Paul Gortmaker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/rtc/: use bcd2bin/bin2bcd

2008-10-20T15:52:41+00:00

Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk 
Acked-by: Alessandro Zummo 
Cc: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc-x1205: Fix alarm set

2008-07-04T17:40:05+00:00

I have discovered that the current version of rtc-x1205.c does not work
correctly when asked to set the alarm time by the RTC_WKALM_SET ioctl()
call.  This happens because the alarm registers do not behave like the
current-time registers.  They are non-volatile.  Two things go wrong:

- the X1205 requires a 10 msec delay after any attempt to write to the
  non-volatile registers.  The x1205_set_datetime() routine does the write
  as 8 single-byte writes without any delay.  Only the first write
  succeeds.  The second is NAKed because the chip is busy.

- the X1205 resets the RWEL bit after any write to the non-volatile
  registers.  This would lock out any further writes after the first even
  with a 10msec delay.

I fix this by doing a single 8-byte write and then waiting 10msec for the
chip to be ready.  A side effect of this change is that it will speed up
x1205_rtc_set_time() which uses the same code.

I have also implemented the 'enable' bit in the rtc_wkalm structure, which
the existing driver does not attempt to do.  I have modified both
x1205_rtc_set_alarm() to set the AL0E bit, and x1205_rtc_read_alarm() to
return it.

I have tested this patch on a LinkSys NSLU2 under OpenWRT, but on no other
hardware.  On the NSLU2 the X1205 correctly asserts its IRQ pin when the
alarm time matches the current time.

[akpm@linux-foundation.org: clean up over-parenthesisation]
Signed-off-by: Michael Hamel 
Signed-off-by: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

i2c: Convert most new-style drivers to use module aliasing

2008-04-29T21:11:40+00:00

Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare 
Cc: Jon Smirl 
Cc: Jochen Friedrich

i2c: Add support for device alias names

2008-04-29T21:11:39+00:00

Based on earlier work by Jon Smirl and Jochen Friedrich.

This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.

Signed-off-by: Jean Delvare 
Cc: Jochen Friedrich 
Cc: Jon Smirl 
Cc: Kay Sievers