linux-toradex.git/drivers/rtc/rtc-zynqmp.c, branch v4.9.120 Linux kernel for Apalis and Colibri modules rtc: zynqmp: Update seconds time programming logic 2016-05-20T10:33:51+00:00 Anurag Kumar Vulisha anurag.kumar.vulisha@xilinx.com 2016-04-20T15:47:35+00:00 b62c3a1158c0abc98e03c68934fa7ee6ca10dd49 We program RTC time using SET_TIME_WRITE register and read the RTC current time using CURRENT_TIME register. When we set the time by writing into SET_TIME_WRITE Register and immediately try to read the rtc time from CURRENT_TIME register, the previous old value is returned instead of the new loaded time. This is because RTC takes nearly 1 sec to update the new loaded value into the CURRENT_TIME register. This behaviour is expected in our RTC IP. This patch updates the driver to read the current time from SET_TIME_WRITE register instead of CURRENT_TIME when rtc time is requested within an 1sec period after setting the RTC time. Doing so will ensure the correct time is given to the user. Since there is a delay of 1sec in updating the CURRENT_TIME we are loading set time +1sec while programming the SET_TIME_WRITE register, doing this will give correct time without any delay when read from CURRENT_TIME. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
We program RTC time using SET_TIME_WRITE register and read the RTC
current time using CURRENT_TIME register. When we set the time by
writing into SET_TIME_WRITE Register and immediately try to read the
rtc time from CURRENT_TIME register, the previous old value is
returned instead of the new loaded time. This is because RTC takes
nearly 1 sec to update the  new loaded value into the CURRENT_TIME
register. This behaviour is expected in our RTC IP.

This patch updates the driver to read the current time from SET_TIME_WRITE
register instead of CURRENT_TIME when rtc time is requested within an 1sec
period after setting the RTC time. Doing so will ensure the correct time is
given to the user.

Since there is a delay of 1sec in updating the CURRENT_TIME we are loading
set time +1sec while programming the SET_TIME_WRITE register, doing this
will give correct time without any delay when read from CURRENT_TIME.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
rtc: zynqmp: Write Calibration value before setting time 2016-05-20T10:33:51+00:00 Anurag Kumar Vulisha anurag.kumar.vulisha@xilinx.com 2016-04-12T12:15:45+00:00 58c4ed3ba2e0c97e33affd237dc05738fa55a725 It is suggested to program CALIB_WRITE register with the calibration value before updating the SET_TIME_WRITE register, doing so will clear the Tick Counter and force the next second to be signaled exactly in 1 second. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
It is suggested to program CALIB_WRITE register with the calibration
value before updating the SET_TIME_WRITE register, doing so will
clear the Tick Counter and force the next second to be signaled
exactly in 1 second.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
rtc: zynqmp: Enable RTC switching to battery power when VCC_PSAUX is N/A 2016-05-20T10:33:51+00:00 Anurag Kumar Vulisha anurag.kumar.vulisha@xilinx.com 2016-04-12T12:15:44+00:00 9092984f1a8440ea52bf53c2d53bf8f5953a5126 In order to conserve battery energy, during the PS operation, it is expected that the supply for the battery-powered domain to be switched from the battery (VCC_PSBATT) to (VCC_PSAUX) and automatically be switched back to battery when VCC_PSAUX voltage drops below a limit, doing so prevents the logic within the battery-powered domain from functioning incorrectly. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
In order to conserve battery energy, during the PS operation,
it is expected that the supply for the battery-powered domain
to be switched from the battery (VCC_PSBATT) to (VCC_PSAUX) and
automatically be switched back to battery when VCC_PSAUX voltage
drops below a limit, doing so prevents the logic within
the battery-powered domain from functioning incorrectly.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
rtc: add xilinx zynqmp rtc driver 2015-09-05T17:37:19+00:00 Suneel Garapati suneel.garapati@xilinx.com 2015-08-19T09:53:22+00:00 11143c19eb57a8aee4335e57b21f2897b9fff294 Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC platform. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC
platform.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>