linux-toradex.git/drivers/s390/char/Makefile, branch v3.2.7

[S390] get CPC image name

2011-05-23T08:24:32+00:00

Provide sysfs attributes that contain the CPC name and the HMC network
name of the machine the operating system is running on. This information
is retrieved with the operation communication parameters (OCF) sclp
interface.

Signed-off-by: Martin Schwidefsky

[S390] Remove tape block device driver.

2011-05-23T08:24:28+00:00

Remove the tape block device driver. It's not of real use but has
already created some confusion when users wanted to access tape devices
and used the block device nodes instead of the character device nodes.

Also remove the whole tape documentation since it's completely outdated
and we have the device drivers book which is the place where everything
is properly documented.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] add call home support

2009-09-11T08:29:49+00:00

Signed-off-by: Hans-Joachim Picht 
Signed-off-by: Martin Schwidefsky

[S390] sclp: convert channel path configure code to use sync interface.

2008-01-26T13:11:10+00:00

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] Standby cpu activation/deactivation.

2008-01-26T13:11:09+00:00

Add a new interface so that cpus can be put into standby state and
configured state.
Only offline cpus can be put into standby state or configured state.
For that the new percpu sysfs attribute "configure" must be used.
To put a cpu in standby state a "0" must be written to the attribute.
In order to switch it into configured state a "1" must be written to
the attribute.
Only cpus in configured state can be brought online.
In addition this patch introduces a static mapping of physical to
logical cpus. As a result only the sysfs directories of present cpus
will be created. To scan for new cpus the new sysfs attribute "rescan"
must be used.
Writing to /sys/devices/system/cpu/rescan will trigger a rescan of
cpus and will create directories for new cpus.

On IPL only configured cpus will be used. And on reboot/shutdown all
cpus will remain in their current state (configured/standby).

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] sclp: sysfs interface for SCLP cpi

2008-01-26T13:11:08+00:00

Signed-off-by: Michael Ernst 
Signed-off-by: Martin Schwidefsky

[S390] z/VM unit record device driver

2007-07-17T11:36:19+00:00

z/VM Unit record character device driver to access VM reader, punch,
and printer.

Signed-off-by: Frank Munzert 
Signed-off-by: Martin Schwidefsky

[S390] Processor degradation notification.

2007-04-27T14:01:46+00:00

Generate uevents for all cpus if cpu capability changes. This can
happen e.g. because the cpus are overheating. The cpu capability can
be read via /sys/devices/system/cpu/cpuN/capability.

Signed-off-by: Martin Schwidefsky 
Signed-off-by: Heiko Carstens

[S390] zfcpdump support.

2007-04-27T14:01:44+00:00

s390 machines provide hardware support for creating Linux dumps on SCSI
disks. For creating a dump a special purpose dump Linux is used. The first
32 MB of memory are saved by the hardware before the dump Linux is
booted. Via an SCLP interface, the saved memory can be accessed from
Linux. This patch exports memory and registers of the crashed Linux to
userspace via a debugfs file. For more information refer to
Documentation/s390/zfcpdump.txt, which is included in this patch.

Signed-off-by: Michael Holzheu 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Heiko Carstens

[S390] cio: Channel-path configure function.

2007-04-27T14:01:39+00:00

Add a new attribute to the channel-path sysfs directory through which
channel-path configure operations can be triggered. Also listen for
hardware events requesting channel-path configure operations and
process them accordingly.

Signed-off-by: Peter Oberparleiter 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Heiko Carstens