linux-toradex.git/drivers/s390/char/sclp.c, branch v3.0.43

[S390] irq: merge irq.c and s390_ext.c

2011-05-26T07:48:24+00:00

Merge irq.c and s390_ext.c into irq.c. That way all external interrupt
related functions are together.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] irq: fix service signal external interrupt handling

2011-05-26T07:48:24+00:00

Interrupt sources like pfault, sclp, dasd_diag and virtio all use the
service signal external interrupt subclass mask in control register 0
to enable and disable the corresponding interrupt.
Because no reference counting is implemented each subsystem thinks it
is the only user of subclass and sets and clears the bit like it wants.
This leads to case that unloading the dasd diag module under z/VM
causes both sclp and pfault interrupts to be masked. The result will
be locked up system sooner or later.
Fix this by introducing a new way to set (register) and clear
(unregister) the service signal subclass mask bit in cr0.
Also convert all drivers.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] sclp: use register_external_interrupt()

2011-01-05T11:47:26+00:00

Use register_external_interrupt() instead of register_early_external_interrupt().
The early variant is not necessary since kmalloc works already.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] irq: have detailed statistics for interrupt types

2011-01-05T11:47:25+00:00

Up to now /proc/interrupts only has statistics for external and i/o
interrupts but doesn't split up them any further.
This patch adds a line for every single interrupt source so that it
is possible to easier tell what the machine is/was doing.
Part of the output now looks like this;

           CPU0       CPU2       CPU4
EXT:       3898       4232       2305
I/O:        782        315        245
CLK:       1029       1964        727   [EXT] Clock Comparator
IPI:       2868       2267       1577   [EXT] Signal Processor
TMR:          0          0          0   [EXT] CPU Timer
TAL:          0          0          0   [EXT] Timing Alert
PFL:          0          0          0   [EXT] Pseudo Page Fault
[...]
NMI:          0          1          1   [NMI] Machine Checks

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky

[S390] cleanup lowcore access from external interrupts

2010-10-25T14:10:19+00:00

Read external interrupts parameters from the lowcore in the first
level interrupt handler in entry[64].S.

Signed-off-by: Martin Schwidefsky

Fix IRQ flag handling naming

2010-10-07T13:08:55+00:00

Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells  [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf  [Tile]
Signed-off-by: Michal Simek  [Microblaze]
Tested-by: Catalin Marinas  [ARM]
Acked-by: Thomas Gleixner 
Acked-by: Haavard Skinnemoen  [AVR]
Acked-by: Tony Luck  [IA-64]
Acked-by: Hirokazu Takata  [M32R]
Acked-by: Greg Ungerer  [M68K/M68KNOMMU]
Acked-by: Ralf Baechle  [MIPS]
Acked-by: Kyle McMartin  [PA-RISC]
Acked-by: Paul Mackerras  [PowerPC]
Acked-by: Martin Schwidefsky  [S390]
Acked-by: Chen Liqin  [Score]
Acked-by: Matt Fleming  [SH]
Acked-by: David S. Miller  [Sparc]
Acked-by: Chris Zankel  [Xtensa]
Reviewed-by: Richard Henderson  [Alpha]
Reviewed-by: Yoshinori Sato  [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com

tree-wide: Assorted spelling fixes

2010-02-09T10:13:56+00:00

In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack 
Cc: Joe Perches 
Cc: Junio C Hamano 
Signed-off-by: Jiri Kosina

const: constify remaining dev_pm_ops

2009-12-15T16:53:25+00:00

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[S390] pm: power management support for SCLP drivers.

2009-06-16T08:31:16+00:00

The SCLP base driver defines a new notifier call back for all upper level SCLP
drivers, like the SCLP console, etc. This guarantees that in suspend first the
upper level drivers are suspended and afterwards the SCLP base driver. For
resume it is the other way round. The SCLP base driver itself registers a
new platform device at the platform bus and gets PM notifications via
the dev_pm_ops.

In suspend, the SCLP base driver switches off the receiver and sender mask
This is done in sclp_deactivate(). After suspend all new requests will be
rejected with -EIO and no more interrupts will be received, because the masks
are switched off. For resume the sender and receiver masks are reset in
the sclp_reactivate() function.

When the SCLP console is suspended, all new messages are cached in the
sclp console buffers. In resume, all the cached messages are written to the
console. In addition to that we have an early resume function that removes
the cached messages from the suspend image.

Signed-off-by: Michael Holzheu 
Signed-off-by: Martin Schwidefsky

[S390] sclp: handle empty event buffers

2009-02-19T14:19:19+00:00

Handle a malformed hardware response which some versions of the
Support Element (SE) may present during SE restart and which otherwise
would result in an endless loop in function sclp_dispatch_evbufs.

Signed-off-by: Peter Oberparleiter 
Signed-off-by: Martin Schwidefsky