linux-toradex.git/drivers/s390/scsi, branch v3.4.45

SCSI: zfcp: only access zfcp_scsi_dev for valid scsi_device

2012-10-12T20:38:47+00:00

commit d436de8ce25f53a8a880a931886821f632247943 upstream.

__scsi_remove_device (e.g. due to dev_loss_tmo) calls
zfcp_scsi_slave_destroy which in turn sends a close LUN FSF request to
the adapter. After 30 seconds without response,
zfcp_erp_timeout_handler kicks the ERP thread failing the close LUN
ERP action. zfcp_erp_wait in zfcp_erp_lun_shutdown_wait and thus
zfcp_scsi_slave_destroy returns and then scsi_device is no longer
valid. Sometime later the response to the close LUN FSF request may
finally come in. However, commit
b62a8d9b45b971a67a0f8413338c230e3117dff5
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit"
introduced a number of attempts to unconditionally access struct
zfcp_scsi_dev through struct scsi_device causing a use-after-free.
This leads to an Oops due to kernel page fault in one of:
zfcp_fsf_abort_fcp_command_handler, zfcp_fsf_open_lun_handler,
zfcp_fsf_close_lun_handler, zfcp_fsf_req_trace,
zfcp_fsf_fcp_handler_common.
Move dereferencing of zfcp private data zfcp_scsi_dev allocated in
scsi_device via scsi_transport_reserve_device after the check for
potentially aborted FSF request and thus no longer valid scsi_device.
Only then assign sdev_to_zfcp(sdev) to the local auto variable struct
zfcp_scsi_dev *zfcp_sdev.

Signed-off-by: Martin Peschke 
Signed-off-by: Steffen Maier 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

SCSI: zfcp: restore refcount check on port_remove

2012-10-12T20:38:47+00:00

commit d99b601b63386f3395dc26a699ae703a273d9982 upstream.

Upstream commit f3450c7b917201bb49d67032e9f60d5125675d6a
"[SCSI] zfcp: Replace local reference counting with common kref"
accidentally dropped a reference count check before tearing down
zfcp_ports that are potentially in use by zfcp_units.
Even remote ports in use can be removed causing
unreachable garbage objects zfcp_ports with zfcp_units.
Thus units won't come back even after a manual port_rescan.
The kref of zfcp_port->dev.kobj is already used by the driver core.
We cannot re-use it to track the number of zfcp_units.
Re-introduce our own counter for units per port
and check on port_remove.

Signed-off-by: Steffen Maier 
Reviewed-by: Heiko Carstens 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

SCSI: zfcp: remove invalid reference to list iterator variable

2012-10-12T20:38:47+00:00

commit ca579c9f136af4274ccfd1bcaee7f38a29a0e2e9 upstream.

If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure.  Thus this value should not be used after
the end of the iterator.  Replace port->adapter->scsi_host by
adapter->scsi_host.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).

Oversight in upsteam commit of v2.6.37
a1ca48319a9aa1c5b57ce142f538e76050bb8972
"[SCSI] zfcp: Move ACL/CFDC code to zfcp_cfdc.c"
which merged the content of zfcp_erp_port_access_changed().

Signed-off-by: Julia Lawall 
Signed-off-by: Steffen Maier 
Reviewed-by: Martin Peschke 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

SCSI: zfcp: Do not wakeup while suspended

2012-10-12T20:38:47+00:00

commit cb45214960bc989af8b911ebd77da541c797717d upstream.

If the mapping of FCP device bus ID and corresponding subchannel
is modified while the Linux image is suspended, the resume of FCP
devices can fail. During resume, zfcp gets callbacks from cio regarding
the modified subchannels but they can be arbitrarily mixed with the
restore/resume callback. Since the cio callbacks would trigger
adapter recovery, zfcp could wakeup before the resume callback.
Therefore, ignore the cio callbacks regarding subchannels while
being suspended. We can safely do so, since zfcp does not deal itself
with subchannels. For problem determination purposes, we still trace the
ignored callback events.

The following kernel messages could be seen on resume:

kernel: : parent  should not be sleeping

As part of adapter reopen recovery, zfcp performs auto port scanning
which can erroneously try to register new remote ports with
scsi_transport_fc and the device core code complains about the parent
(adapter) still sleeping.

kernel: zfcp.3dff9c: :\
 Setting up the QDIO connection to the FCP adapter failed

kernel: zfcp.574d43: :\
 ERP cannot recover an error on the FCP device

In such cases, the adapter gave up recovery and remained blocked along
with its child objects: remote ports and LUNs/scsi devices. Even the
adapter shutdown as part of giving up recovery failed because the ccw
device state remained disconnected. Later, the corresponding remote
ports ran into dev_loss_tmo. As a result, the LUNs were erroneously
not available again after resume.

Even a manually triggered adapter recovery (e.g. sysfs attribute
failed, or device offline/online via sysfs) could not recover the
adapter due to the remaining disconnected state of the corresponding
ccw device.

Signed-off-by: Steffen Maier 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

SCSI: zfcp: Bounds checking for deferred error trace

2012-10-12T20:38:46+00:00

commit 01e60527f0a49b3d7df603010bd6079bb4b6cf07 upstream.

The pl vector has scount elements, i.e. pl[scount-1] is the last valid
element. For maximum sized requests, payload->counter == scount after
the last loop iteration. Therefore, do bounds checking first (with
boolean shortcut) to not access the invalid element pl[scount].

Do not trust the maximum sbale->scount value from the HBA
but ensure we won't access the pl vector out of our allocated bounds.
While at it, clean up scoping and prevent unnecessary memset.

Minor fix for 86a9668a8d29ea711613e1cb37efa68e7c4db564
"[SCSI] zfcp: support for hardware data router"

Signed-off-by: Steffen Maier 
Reviewed-by: Martin Peschke 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

SCSI: zfcp: Make trace record tags unique

2012-10-12T20:38:46+00:00

commit 0100998dbfe6dfcd90a6e912ca7ed6f255d48f25 upstream.

Duplicate fssrh_2 from a54ca0f62f953898b05549391ac2a8a4dad6482b
"[SCSI] zfcp: Redesign of the debug tracing for HBA records."
complicates distinction of generic status read response from
local link up.
Duplicate fsscth1 from 2c55b750a884b86dea8b4cc5f15e1484cc47a25c
"[SCSI] zfcp: Redesign of the debug tracing for SAN records."
complicates distinction of good common transport response from
invalid port handle.

Signed-off-by: Steffen Maier 
Reviewed-by: Martin Peschke 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

SCSI: zfcp: Adapt to new FC_PORTSPEED semantics

2012-10-12T20:38:46+00:00

commit d22019778cd9ea04c1dadf7bf453920d5288f8d9 upstream.

Commit a9277e7783651d4e0a849f7988340b1c1cf748a4
"[SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS"
changed the semantics of FC_PORTSPEED defines to
FDMI port attributes of FC-HBA/SM-HBA
which is different from the previous bit reversed
Report Port Speed Capabilities (RPSC) ELS of FC-GS/FC-LS.

Zfcp showed "10 Gbit" instead of "4 Gbit" for supported_speeds.
It now uses explicit bit conversion as the other LLDs already
do, in order to be independent of the kernel bit semantics.
See also http://marc.info/?l=linux-scsi&m=134452926830730&w=2

Signed-off-by: Steffen Maier 
Reviewed-by: Martin Peschke 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

compat: fix compile breakage on s390

2012-02-27T15:54:27+00:00

The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.

This is the minimal patch which fixes the build issues.

Signed-off-by: Heiko Carstens 
Signed-off-by: Linus Torvalds

[SCSI] zfcp: return early from slave_destroy if slave_alloc returned early

2011-12-14T11:40:43+00:00

zfcp_scsi_slave_destroy erroneously always tried to finish its task
even if the corresponding previous zfcp_scsi_slave_alloc returned
early. This can lead to kernel page faults on accessing uninitialized
fields of struct zfcp_scsi_dev in zfcp_erp_lun_shutdown_wait. Take the
port field of the struct to determine if slave_alloc returned early.

This zfcp bug is exposed by 4e6c82b (in turn fixing f7c9c6b to be
compatible with 21208ae) which can call slave_destroy for a
corresponding previous slave_alloc that did not finish.

This patch is based on James Bottomley's fix suggestion in
http://www.spinics.net/lists/linux-scsi/msg55449.html.

Signed-off-by: Steffen Maier 
Cc:  #2.6.38+
Signed-off-by: James Bottomley

s390: add missing module.h/export.h includes

2011-10-31T23:30:58+00:00

Fix several compile errors on s390 caused by splitting module.h.

Some include additions [e.g. qdio_setup.c, zfcp_qdio.c] are in
anticipation of pending changes queued for s390 that increase
the modular use footprint.

[PG: added additional obvious changes since Heiko's original patch]

Signed-off-by: Heiko Carstens 
Signed-off-by: Paul Gortmaker