linux-toradex.git/drivers/s390/scsi, branch v4.18-rc4

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-06-10T20:01:12+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...

scsi: zfcp: enhance comments on fc_link_speed and supported_speed

2018-05-18T15:28:17+00:00

The comment on fsf_qtcb_bottom_port.supported_speed did read as if the field
can only assume one of two possible values (i.e. 0x1 for 1 GBit/s or 0x2 for
2 GBit/s). This is not true for two reasons: first it is a flag field and
can thus assume any combination and second there are meanwhile more speeds.

Clarify comment on fsf_qtcb_bottom_port.supported_speed and add a comment to
fsf_qtcb_bottom_config.fc_link_speed.

Signed-off-by: Jens Remus 
Reviewed-by: Steffen Maier 
Reviewed-by: Fedor Loshakov 
Acked-by: Benjamin Block 
Acked-by: Hendrik Brueckner 
Signed-off-by: Steffen Maier 
Signed-off-by: Martin K. Petersen

scsi: zfcp: add port speed capabilities

2018-05-18T15:28:16+00:00

Add port speed capabilities as defined in FC-LS RPSC ELS that have a
counterpart FC_PORTSPEED_* defined in scsi/scsi_transport_fc.h.

Suggested-by: Steffen Maier 
Signed-off-by: Jens Remus 
Reviewed-by: Steffen Maier 
Reviewed-by: Fedor Loshakov 
Acked-by: Hendrik Brueckner 
Acked-by: Benjamin Block 
Signed-off-by: Steffen Maier 
Signed-off-by: Martin K. Petersen

scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger

2018-05-18T15:28:16+00:00

Otherwise iterating with list_for_each() over the adapter->erp_ready_head
and adapter->erp_running_head lists can lead to an infinite loop. See commit
"zfcp: fix infinite iteration on erp_ready_head list".

The run-time check is only performed for debug kernels which have the kernel
lock validator enabled. Following is an example of the warning that is
reported, if the ERP lock is not held when calling zfcp_dbf_rec_trig():

WARNING: CPU: 0 PID: 604 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x172/0x188
Modules linked in: ...
CPU: 0 PID: 604 Comm: kworker/u128:3 Not tainted 4.16.0-... #1
Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)
Workqueue: zfcp_q_0.0.1906 zfcp_scsi_rport_work
Krnl PSW : 00000000330fdbf9 00000000367e9728 (zfcp_dbf_rec_trig+0x172/0x188)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
Krnl GPRS: 00000000c57a5d99 3288200000000000 0000000000000000 000000006cc82740
           00000000009d09d6 0000000000000000 00000000000000ff 0000000000000000
           0000000000000000 0000000000e1b5fe 000000006de01d38 0000000076130958
           000000006cc82548 000000006de01a98 00000000009d09d6 000000006a6d3c80
Krnl Code: 00000000009d0ad2: eb7ff0b80004        lmg        %r7,%r15,184(%r15)
           00000000009d0ad8: c0f4000d7dd0        brcl       15,b80678
          #00000000009d0ade: a7f40001            brc        15,9d0ae0
          >00000000009d0ae2: a7f4ff7d            brc        15,9d09dc
           00000000009d0ae6: e340f0f00004        lg         %r4,240(%r15)
           00000000009d0aec: eb7ff0b80004        lmg        %r7,%r15,184(%r15)
           00000000009d0af2: 07f4                bcr        15,%r4
           00000000009d0af4: 0707                bcr        0,%r7
Call Trace:
([<00000000009d09d6>] zfcp_dbf_rec_trig+0x66/0x188)
 [<00000000009dd740>] zfcp_scsi_rport_work+0x98/0x190
 [<0000000000169b34>] process_one_work+0x3d4/0x6f8
 [<000000000016a08a>] worker_thread+0x232/0x418
 [<000000000017219e>] kthread+0x166/0x178
 [<0000000000b815ea>] kernel_thread_starter+0x6/0xc
 [<0000000000b815e4>] kernel_thread_starter+0x0/0xc
2 locks held by kworker/u128:3/604:
 #0:  ((wq_completion)name){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8
 #1:  ((work_completion)(&port->rport_work)){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8
Last Breaking-Event-Address:
 [<00000000009d0ade>] zfcp_dbf_rec_trig+0x16e/0x188
---[ end trace b2f4020572e2c124 ]---

Suggested-by: Steffen Maier 
Signed-off-by: Jens Remus 
Reviewed-by: Benjamin Block 
Reviewed-by: Steffen Maier 
Signed-off-by: Steffen Maier 
Signed-off-by: Martin K. Petersen

scsi: zfcp: cleanup indentation for posting FC events

2018-05-18T15:28:15+00:00

I just happened to see the function header indentation of
zfcp_fc_enqueue_event() and I picked some more from checkpatch:

$ checkpatch.pl --strict -f drivers/s390/scsi/zfcp_fc.c
...
CHECK: Alignment should match open parenthesis
 #113: FILE: drivers/s390/scsi/zfcp_fc.c:113:
+		fc_host_post_event(adapter->scsi_host, fc_get_event_number(),
+				event->code, event->data);

CHECK: Blank lines aren't necessary before a close brace '}'
 #118: FILE: drivers/s390/scsi/zfcp_fc.c:118:
+
+}
...

The change complements v2.6.36 commit 2d1e547f7523 ("[SCSI] zfcp: Post
events through FC transport class").

Signed-off-by: Steffen Maier 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin K. Petersen

scsi: zfcp: support SCSI_ADAPTER_RESET via scsi_host sysfs attribute host_reset

2018-05-18T15:28:15+00:00

Make use of feature introduced with v3.2 commit 294436914454 ("[SCSI] scsi:
Added support for adapter and firmware reset").  The common code interface
was introduced for commit 95d31262b3c1 ("[SCSI] qla4xxx: Added support for
adapter and firmware reset").

$ echo adapter > /sys/class/scsi_host/host/host_reset

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1                      ZFCP_DBF_REC_TRIG
Tag            : scshr_y                SCSI sysfs host_reset yes
LUN            : 0xffffffffffffffff                     none (invalid)
WWPN           : 0x0000000000000000                     none (invalid)
D_ID           : 0x00000000                             none (invalid)
Adapter status : 0x4500050b
Port status    : 0x00000000                             none (invalid)
LUN status     : 0x00000000                             none (invalid)
Ready count    : 0x00000001
Running count  : 0x00000000
ERP want       : 0x04                   ZFCP_ERP_ACTION_REOPEN_ADAPTER
ERP need       : 0x04                   ZFCP_ERP_ACTION_REOPEN_ADAPTER

This is the common code equivalent to the zfcp-specific
&dev_attr_adapter_failed.attr in zfcp_sysfs_adapter_attrs.attrs[]:

$ echo 0 > /sys/bus/ccw/drivers/zfcp//failed

The unsupported case returns EOPNOTSUPP:

$ echo firmware > /sys/class/scsi_host/host/host_reset
-bash: echo: write error: Operation not supported

Example trace record formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : scshr_n                        SCSI sysfs host_reset no
Request ID     : 0x0000000000000000                     none (invalid)
SCSI ID        : 0xffffffff                             none (invalid)
SCSI LUN       : 0xffffffff                             none (invalid)
SCSI LUN high  : 0xffffffff                             none (invalid)
SCSI result    : 0xffffffa1                     -EOPNOTSUPP==-95
SCSI retries   : 0xff                                   none (invalid)
SCSI allowed   : 0xff                                   none (invalid)
SCSI scribble  : 0xffffffffffffffff                     none (invalid)
SCSI opcode    : ffffffff ffffffff ffffffff ffffffff    none (invalid)
FCP rsp inf cod: 0xff                                   none (invalid)
FCP rsp IU     : 00000000 00000000 00000000 00000000    none (invalid)
                 00000000 00000000

For any other invalid value, common code returns EINVAL without invoking
our callback:

$ echo foo > /sys/class/scsi_host/host/host_reset
-bash: echo: write error: Invalid argument

Signed-off-by: Steffen Maier 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin K. Petersen

scsi: zfcp: explicitly support initiator in scsi_host_template

2018-05-18T15:28:14+00:00

While the default did already correctly print "Initiator" let's make it
explicit and convert zfcp to the feature.

$ cat /sys/class/scsi_host/host0/supported_mode
Initiator

$ cat /sys/class/scsi_host/host0/active_mode
Initiator

The default worked, because not setting the field has it initialized to zero
== MODE_UNKNOWN. scsi_host_alloc() sets shost->active_mode = MODE_INITIATOR
in this case. The sysfs accessor function show_shost_supported_mode()
assumes MODE_INITIATOR in this case.  This default behavior was introduced
with v2.6.24 commit 7a39ac3f25be ("[SCSI] make supported_mode default to
initiator.").  The feature flag was introduced with v2.6.24 commit
5dc2b89e1242 ("[SCSI] add supported_mode and active_mode attributes to the
host").  So there was no release where zfcp would have shown "unknown".

Signed-off-by: Steffen Maier 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin K. Petersen

scsi: zfcp: remove unused return values of ERP trigger functions

2018-05-18T15:28:14+00:00

Since v2.6.27 commit 553448f6c483 ("[SCSI] zfcp: Message cleanup"), none of
the callers has been interested any more.  Values were not returned
consistently in all ERP trigger functions.

Signed-off-by: Steffen Maier 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin K. Petersen

scsi: zfcp: zfcp_erp_action_exists() does only check for running

2018-05-18T15:28:13+00:00

Simplify its signature to return boolean and rename it to
zfcp_erp_action_is_running() to indicate its actual unmodified semantics.
It has always been used like this since v2.6.0 history commit ea127f975424
("[PATCH] s390 (7/7): zfcp host adapter.").

Signed-off-by: Steffen Maier 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin K. Petersen

scsi: zfcp: remove unused ERP enum values

2018-05-18T15:28:12+00:00

All constant defines were introduced with v2.6.0 history commit ea127f975424
("[PATCH] s390 (7/7): zfcp host adapter.") and refactored into enums with
commit 287ac01acf22 ("[SCSI] zfcp: Cleanup code in zfcp_erp.c").

ZFCP_STATUS_ERP_DISMISSING and ZFCP_ERP_STEP_FSF_XCONFIG were never used.

v2.6.27 commit 287ac01acf22 ("[SCSI] zfcp: Cleanup code in zfcp_erp.c")
removed the use of ZFCP_ERP_ACTION_READY on refactoring
zfcp_erp_action_exists() to now only check adapter->erp_running_head but no
longer adapter->erp_ready_head. The same commit could have changed the
function return type from int to "enum zfcp_erp_act_state".
ZFCP_ERP_ACTION_READY was never used outside of zfcp_erp_action_exists().

Signed-off-by: Steffen Maier 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin K. Petersen