linux-toradex.git/drivers/s390, branch v3.14.4

s390/chsc: fix SEI usage on old FW levels

2014-05-13T11:32:49+00:00

commit 06cd7a874ec6e09d151aeb1fa8600e14f1ff89f6 upstream.

Using a notification type mask for the store event information chsc
is unsupported on some firmware levels. Retry SEI with that mask set
to zero (which is the old way of requesting only channel subsystem
related events).

Reported-and-tested-by: Stefan Haberland 
Reviewed-by: Peter Oberparleiter 
Signed-off-by: Sebastian Ott 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/cio: fix driver callback initialization for ccw consoles

2014-05-06T14:59:24+00:00

commit 2253e8d79237c69086ded391e6767afe16972527 upstream.

ccw consoles are in use before they can be properly registered with
the driver core. For devices which are in use by a device driver we
rely on the ccw_device's pointer to the driver callbacks to be valid.
For ccw consoles this pointer is NULL until they are registered later
during boot and we dereferenced this pointer. This worked by
chance on 64 bit builds (cdev->drv was NULL but the optional callback
cdev->drv->path_event was also NULL by coincidence) and was unnoticed
until we received reports about boot failures on 31 bit systems.
Fix it by initializing the driver pointer for ccw consoles.

Reported-by: Mike Frysinger 
Reported-by: Heiko Carstens 
Reviewed-by: Peter Oberparleiter 
Signed-off-by: Sebastian Ott 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-03-04T16:44:32+00:00

Pull networking fixes from David Miller:

 1) Fix memory leak in ieee80211_prep_connection(), sta_info leaked on
    error.  From Eytan Lifshitz.

 2) Unintentional switch case fallthrough in nft_reject_inet_eval(),
    from Patrick McHardy.

 3) Must check if payload lenth is a power of 2 in
    nft_payload_select_ops(), from Nikolay Aleksandrov.

 4) Fix mis-checksumming in xen-netfront driver, ip_hdr() is not in the
    correct place when we invoke skb_checksum_setup().  From Wei Liu.

 5) TUN driver should not advertise HW vlan offload features in
    vlan_features.  Fix from Fernando Luis Vazquez Cao.

 6) IPV6_VTI needs to select NET_IPV_TUNNEL to avoid build errors, fix
    from Steffen Klassert.

 7) Add missing locking in xfrm_migrade_state_find(), we must hold the
    per-namespace xfrm_state_lock while traversing the lists.  Fix from
    Steffen Klassert.

 8) Missing locking in ath9k driver, access to tid->sched must be done
    under ath_txq_lock().  Fix from Stanislaw Gruszka.

 9) Fix two bugs in TCP fastopen.  First respect the size argument given
    to tcp_sendmsg() in the fastopen path, and secondly prevent
    tcp_send_syn_data() from potentially using order-5 allocations.
    From Eric Dumazet.

10) Fix handling of default neigh garbage collection params, from Jiri
    Pirko.

11) Fix cwnd bloat and over-inflation of RTT when transmit segmentation
    is in use.  From Eric Dumazet.

12) Missing initialization of Realtek r8169 driver's statistics
    seqlocks.  Fix from Kyle McMartin.

13) Fix RTNL assertion failures in 802.3ad and AB ARP monitor of bonding
    driver, from Ding Tianhong.

14) Bonding slave release race can cause divide by zero, fix from
    Nikolay Aleksandrov.

15) Overzealous return from neigh_periodic_work() causes reachability
    time to not be computed.  Fix from Duain Jiong.

16) Fix regression in ipv6_find_hdr(), it should not return -ENOENT when
    a specific target is specified and found.  From Hans Schillstrom.

17) Fix VLAN tag stripping regression in BNA driver, from Ivan Vecera.

18) Tail loss probe can calculate bogus RTTs due to missing packet
    marking on retransmit.  Fix from Yuchung Cheng.

19) We cannot do skb_dst_drop() in iptunnel_pull_header() because
    multicast loopback detection in later code paths need access to
    skb_rtable().  Fix from Xin Long.

20) The macvlan driver regresses in that it propagates lower device
    offload support disables into itself, causing severe slowdowns when
    running over a bridge.  Provide the software offloads always on
    macvlan devices to deal with this and the regression is gone.  From
    Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
  macvlan: Add support for 'always_on' offload features
  net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable
  ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer
  net: cpsw: fix cpdma rx descriptor leak on down interface
  be2net: isolate TX workarounds not applicable to Skyhawk-R
  be2net: Fix skb double free in be_xmit_wrokarounds() failure path
  be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode
  be2net: Fix to reset transparent vlan tagging
  qlcnic: dcb: a couple off by one bugs
  tcp: fix bogus RTT on special retransmission
  hsr: off by one sanity check in hsr_register_frame_in()
  can: remove CAN FD compatibility for CAN 2.0 sockets
  can: flexcan: factor out soft reset into seperate funtion
  can: flexcan: flexcan_remove(): add missing netif_napi_del()
  can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
  can: flexcan: factor out transceiver {en,dis}able into seperate functions
  can: flexcan: fix transition from and to low power mode in chip_{en,dis}able
  can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails
  can: flexcan: fix shutdown: first disable chip, then all interrupts
  USB AX88179/178A: Support D-Link DUB-1312
  ...

qeth: postpone freeing of qdio memory

2014-02-25T23:29:02+00:00

To guarantee that a qdio ccw_device no longer touches the
qdio memory shared with Linux, the qdio ccw_device should
be offline when freeing the qdio memory. Thus this patch
postpones freeing of qdio memory.

Signed-off-by: Ursula Braun 
Signed-off-by: Frank Blaschka 
Reviewed-by: Sebastian Ott 
Signed-off-by: David S. Miller

s390/cio: Fix missing subchannels after CHPID configure on

2014-02-21T07:48:33+00:00

Performing a Channel-Path configure on operation on a Channel-Path ID
(CHPID) does not trigger a scan for subchannels that might have become
available through that CHPID. As a result, some subchannels and
associated I/O devices might be missing. Fix this by adding the missing
scan.

This problem was introduced by commit c820de39, "[S390] cio: Rework
css driver.", but wasn't noticed earlier because the machine usually
also generates a Channel-Report-Word when the first CHPID of a
subchannel is configured on, resulting in a separate scan for that
subchannel. The problem only becomes apparent when this first CHPID is
not working properly and additional working CHPIDs are subsequently
configured on without any effect on the availability of the affected
subchannel.

Reviewed-by: Sebastian Ott 
Signed-off-by: Peter Oberparleiter 
Signed-off-by: Martin Schwidefsky

s390/zcrypt: additional check to avoid overflow in msg-type 6 requests

2014-02-12T08:49:45+00:00

Signed-off-by: Ingo Tuchscherer 
Signed-off-by: Martin Schwidefsky

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2014-02-11T20:23:50+00:00

Pull s390 bugfixes from Martin Schwidefsky:
 "A collection a bug fixes.  Most of them are minor but two of them are
  more severe.  The linkage stack bug can be used by user space to force
  an oops, with panic_on_oops this is a denial-of-service.  And the dump
  memory detection issue can cause incomplete memory dumps"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: improve cio_commit_config
  s390: fix kernel crash due to linkage stack instructions
  s390/dump: Fix dump memory detection
  s390/appldata: restore missing init_virt_timer()
  s390/qdio: correct program-controlled interruption checking
  s390/qdio: for_each macro correctness

s390/cio: improve cio_commit_config

2014-02-06T10:21:23+00:00

The modify subchannel wrapper cio_commit_config can fail when
(unexpected) status is pending on the subchannel.

Callers of cio_commit_config (that operated on enabled subchannels)
needed to do error handling for that case (clear the unexpected
status with test subchannel and retry). This error handling is
missing in some code paths and caused online setting of devices to
fail.

Fix this for all callers by moving the error handling inside
cio_commit_config.

Reviewed-by: Peter Oberparleiter 
Signed-off-by: Sebastian Ott 
Signed-off-by: Martin Schwidefsky

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-01-31T16:37:32+00:00

Pull more KVM updates from Paolo Bonzini:
 "Second batch of KVM updates.  Some minor x86 fixes, two s390 guest
  features that need some handling in the host, and all the PPC changes.

  The PPC changes include support for little-endian guests and
  enablement for new POWER8 features"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits)
  x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101
  x86, kvm: cache the base of the KVM cpuid leaves
  kvm: x86: move KVM_CAP_HYPERV_TIME outside #ifdef
  KVM: PPC: Book3S PR: Cope with doorbell interrupts
  KVM: PPC: Book3S HV: Add software abort codes for transactional memory
  KVM: PPC: Book3S HV: Add new state for transactional memory
  powerpc/Kconfig: Make TM select VSX and VMX
  KVM: PPC: Book3S HV: Basic little-endian guest support
  KVM: PPC: Book3S HV: Add support for DABRX register on POWER7
  KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells
  KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8
  KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs
  KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap
  KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8
  KVM: PPC: Book3S HV: Add handler for HV facility unavailable
  KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8
  KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs
  KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbers
  KVM: PPC: Book3S HV: Don't set DABR on POWER8
  kvm/ppc: IRQ disabling cleanup
  ...

Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block

2014-01-30T19:19:05+00:00

Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...