linux-toradex.git/drivers/s390, branch v3.2.73

s390/3215: fix tty output containing tabs

2015-02-20T00:49:40+00:00

commit e512d56c799517f33b301d81e9a5e0ebf30c2d1e upstream.

git commit 37f81fa1f63ad38e16125526bb2769ae0ea8d332
"n_tty: do O_ONLCR translation as a single write"
surfaced a bug in the 3215 device driver. In combination this
broke tab expansion for tty ouput.

The cause is an asymmetry in the behaviour of tty3215_ops->write
vs tty3215_ops->put_char. The put_char function scans for '\t'
but the write function does not.

As the driver has logic for the '\t' expansion remove XTABS
from c_oflag of the initial termios as well.

Reported-by: Stephen Powell 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Ben Hutchings

qeth: avoid buffer overflow in snmp ioctl

2014-01-03T04:33:18+00:00

commit 6fb392b1a63ae36c31f62bc3fc8630b49d602b62 upstream.

Check user-defined length in snmp ioctl request and allow request
only if it fits into a qeth command buffer.

Signed-off-by: Ursula Braun 
Signed-off-by: Frank Blaschka 
Reviewed-by: Heiko Carstens 
Reported-by: Nico Golde 
Reported-by: Fabian Yamaguchi 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

zfcp: fix schedule-inside-lock in scsi_device list loops

2013-09-10T00:57:28+00:00

commit 924dd584b198a58aa7cb3efefd8a03326550ce8f upstream.

BUG: sleeping function called from invalid context at kernel/workqueue.c:2752
in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700
CPU: 1 Not tainted 3.9.3+ #69
Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30)

Call Trace:
([<00000000001165de>] show_trace+0x106/0x154)
 [<00000000001166a0>] show_stack+0x74/0xf4
 [<00000000006ff646>] dump_stack+0xc6/0xd4
 [<000000000017f3a0>] __might_sleep+0x128/0x148
 [<000000000015ece8>] flush_work+0x54/0x1f8
 [<00000000001630de>] __cancel_work_timer+0xc6/0x128
 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c
 [<0000000000161816>] execute_in_process_context+0x96/0xa8
 [<00000000004d33d8>] device_release+0x60/0xc0
 [<000000000048af48>] kobject_release+0xa8/0x1c4
 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130
 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp]
 [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp]
 [<000000000016b75a>] kthread+0xf2/0xfc
 [<000000000070c9de>] kernel_thread_starter+0x6/0xc
 [<000000000070c9d8>] kernel_thread_starter+0x0/0xc

Apparently, the ref_count for some scsi_device drops down to zero,
triggering device removal through execute_in_process_context(), while
the lldd error recovery thread iterates through a scsi device list.
Unfortunately, execute_in_process_context() decides to immediately
execute that device removal function, instead of scheduling asynchronous
execution, since it detects process context and thinks it is safe to do
so. But almost all calls to shost_for_each_device() in our lldd are
inside spin_lock_irq, even in thread context. Obviously, schedule()
inside spin_lock_irq sections is a bad idea.

Change the lldd to use the proper iterator function,
__shost_for_each_device(), in combination with required locking.

Occurences that need to be changed include all calls in zfcp_erp.c,
since those might be executed in zfcp error recovery thread context
with a lock held.

Other occurences of shost_for_each_device() in zfcp_fsf.c do not
need to be changed (no process context, no surrounding locking).

The problem was introduced in Linux 2.6.37 by commit
b62a8d9b45b971a67a0f8413338c230e3117dff5
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit".

Reported-by: Christian Borntraeger 
Signed-off-by: Martin Peschke 
Signed-off-by: Steffen Maier 
Signed-off-by: James Bottomley 
Signed-off-by: Ben Hutchings

zfcp: fix lock imbalance by reworking request queue locking

2013-09-10T00:57:28+00:00

commit d79ff142624e1be080ad8d09101f7004d79c36e1 upstream.

This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().

The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.

This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():

BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
    last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]

It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.

This patch also fixes these warnings from the sparse tool (make C=1):

drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
 'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
 'zfcp_qdio_sbal_get' - unexpected unlock

Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.

It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.

Reported-by: Mikulas Patocka 
Reported-by: Heiko Carstens 
Signed-off-by: Martin Peschke 
Signed-off-by: Steffen Maier 
Signed-off-by: James Bottomley 
Signed-off-by: Ben Hutchings

zfcp: status read buffers on first adapter open with link down

2013-07-27T04:34:05+00:00

commit 9edf7d75ee5f21663a0183d21f702682d0ef132f upstream.

Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93
"[SCSI] zfcp: Use status_read_buf_num provided by FCP channel"
started using a value returned by the channel but only evaluated the value
if the fabric link is up.
Commit 8d88cf3f3b9af4713642caeb221b6d6a42019001
"[SCSI] zfcp: Update status read mempool"
introduced mempool resizings based on the above value.
On setting an FCP device online for the very first time since boot, a new
zeroed adapter object is allocated. If the link is down, the number of
status read requests remains zero. Since just the config data exchange is
incomplete, we proceed with adapter open recovery. However, we
unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in
this case.

This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process
"zfcperp" with last function mempool_resize in Krnl PSW
and zfcp_erp_thread in the Call Trace.

Don't evaluate channel values which are invalid on link down. The number of
status read requests is always valid, evaluated, and set to a positive
minimum greater than zero. The adapter open recovery can proceed and the
channel has status read buffers to inform us on a future link up event.
While we are not aware of any other code path that could result in mempool
resize attempts of size zero, we still also initialize the number of status
read buffers to be posted to a static minimum number on adapter object
allocation.

Signed-off-by: Steffen Maier 
Signed-off-by: James Bottomley 
[bwh: Backported to 3.2:
 - Copyright notice changed slightly
 - Don't use zfcp_fsf_convert_portspeed()]
Signed-off-by: Ben Hutchings

zfcp: block queue limits with data router

2013-07-27T04:34:05+00:00

commit 5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream.

Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564
"[SCSI] zfcp: support for hardware data router"
reduced the initial block queue limits in the scsi_host_template to the
absolute minimum and adjusted them later on. However, the adjustment was
too late for the BSG devices of Scsi_Host and fc_host.

Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a
BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result,
users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return
with error HBA_STATUS_ERROR.

Initialize the block queue limits in zfcp_scsi_host_template to the
greatest common denominator (GCD).

While we cannot exploit the slightly enlarged maximum request size with
data router, this should be neglectible. Doing so also avoids running into
trouble after live guest relocation (LGR) / migration from a data router
FCP device to an FCP device that does not support data router. In that
case, zfcp would figure out the new limits on adapter recovery, but the
fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and
now too large queue limits.

It should also OK, not to use half the size as in the DIX case, because
fc_host and Scsi_Host do not transport FCP requests including SCSI commands
using protection data.

Signed-off-by: Steffen Maier 
Reviewed-by: Martin Peschke 
Signed-off-by: James Bottomley 
[bwh: Backported to 3.2: copyright notice changed slightly]
Signed-off-by: Ben Hutchings

zfcp: fix adapter (re)open recovery while link to SAN is down

2013-07-27T04:34:05+00:00

commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.

FCP device remains in status ERP_FAILED when device is switched online
or adapter recovery is triggered  while link to SAN is down.

When Exchange Configuration Data command returns the FSF status
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process.
The only retries are done during the common error recovery procedure
(i.e. max. 3 retries with 8sec sleep between) and remains in status
ERP_FAILED with QDIO down.

This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c
(zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the
adapter recovery will be finished without any retries. QDIO will be
up now and status changes such as LINK UP will be received now.

Signed-off-by: Daniel Hansel 
Signed-off-by: Steffen Maier 
Signed-off-by: James Bottomley 
Signed-off-by: Ben Hutchings

s390/memory hotplug: prevent offline of active memory increments

2013-05-13T14:02:27+00:00

commit 94c163663fc1dcfc067a5fb3cc1446b9469975ce upstream.

In case a machine supports memory hotplug all active memory increments
present at IPL time have been initialized with a "usecount" of 1.
This is wrong if the memory increment size is larger than the memory
section size of the memory hotplug code. If that is the case the
usecount must be initialized with the number of memory sections that
fit into one memory increment.
Otherwise it is possible to put a memory increment into standby state
even if there are still active sections.
Afterwards addressing exceptions might happen which cause the kernel
to panic.
However even worse, if a memory increment was put into standby state
and afterwards into active state again, it's contents would have been
zeroed, leading to memory corruption.

This was only an issue for machines that support standby memory and
have at least 256GB memory.

This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix
initial usecount of increments".

Signed-off-by: Heiko Carstens 
Reviewed-by: Gerald Schaefer 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Ben Hutchings

KVM: s390: Handle hosts not supporting s390-virtio.

2013-03-06T03:22:34+00:00

commit 55c171a6d90dc0574021f9c836127cfd1a7d2e30 upstream.

Running under a kvm host does not necessarily imply the presence of
a page mapped above the main memory with the virtio information;
however, the code includes a hard coded access to that page.

Instead, check for the presence of the page and exit gracefully
before we hit an addressing exception if it does not exist.

Reviewed-by: Marcelo Tosatti 
Reviewed-by: Alexander Graf 
Signed-off-by: Cornelia Huck 
Signed-off-by: Gleb Natapov 
Signed-off-by: Ben Hutchings

s390/cio: fix pgid reserved check

2013-01-03T03:33:26+00:00

commit d99e79ec5574fc556c988f613ed6175f6de66f4a upstream.

The check to whom a device is reserved is done by checking the path
state of the affected channel paths. If it turns out that one path is
flagged as reserved by someone else the whole device is marked as such.

However the meaning of the RESVD_ELSE bit is that the addressed device
is reserved to a different pathgroup (and not reserved to a different
LPAR). If we do this test on a path which is currently not a member of
the pathgroup we could erroneously mark the device as reserved to
someone else.

To fix this collect the reserved state for all potential members of the
pathgroup and only mark the device as reserved if all of those potential
members have the RESVD_ELSE bit set.

Acked-by: Peter Oberparleiter 
Signed-off-by: Sebastian Ott 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Ben Hutchings