Pull s390 fixes from Martin Schwidefsky:
 "Two late bug fixes for kernel 4.4.

  Merry Christmas"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dis: Fix handling of format specifiers
  s390/zcrypt: Fix AP queue handling if queue is full

The common I/O layer may pass an error value as the irb in the device's
interrupt handler (for classic channel I/O). This won't happen in
current virtio-ccw implementations, but it's better to be safe than
sorry.

Let's just return the error conveyed by the irb and clear any possible
pending I/O indications.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When the AP queue depth of requests was reached additional requests
have been ignored. These request are stuck in the request queue.

The AP queue handling now push the next waiting request into the
queue after fetching a previous serviced and finished reply.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull s390 fixes from Martin Schwidefsky:
 "Assorted bug fixes, the mlock2 system call gets added, and one
  improvement.  The boot from dasd devices is now possible from a wider
  range of devices"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: remove SALIPL loader
  s390: wire up mlock2 system call
  s390: remove g5 elf platform support
  s390: avoid cache aliasing under z/VM and KVM
  s390/sclp: _sclp_wait_int(): retain full PSW mask
  s390/zcrypt: Fix initialisation when zcrypt is built-in
  s390/zcrypt: Fix kernel crash on systems without AP bus support
  s390: add support for ipl devices in subchannel sets > 0
  s390/ipl: fix out of bounds access in scpdata_write
  s390/pci_dma: improve debugging of errors during dma map
  s390/pci_dma: handle dma table failures
  s390/pci_dma: unify label of invalid translation table entries
  s390/syscalls: remove system call number calculation
  s390/cio: simplify css_generate_pgid
  s390/diag: add a s390 prefix to the diagnose trace point
  s390/head: fix error message on unsupported hardware

ap_bus and zcrypt_api assumed module information to always be present
and initialisation to be done in module loading order (symbol
dependencies). These assumptions don't hold if zcrypt is built-in;
THIS_MODULE will be NULL in this case and init call order is linker
order, i.e. Makefile order.

Fix initialisation order by ordering the object files in the Makefile
according to their dependencies, like the module loader would do.

Fix message type registration by using a dedicated "name" field rather
than piggy-backing on the module ("owner") information. There's no
change to the requirement that module name and msgtype name are
identical. The existing name macros are used.

We don't need any special code for dealing with the drivers being
built-in; the generic module support code already does the right
thing.

Test results:
1. CONFIG_MODULES=y, CONFIG_ZCRYPT=y

   KVM: boots, no /sys/bus/ap (expected)
   LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present

2. CONFIG_MODULES=y, CONFIG_ZCRYPT=m=:

   KVM: boots, loading zcrypt_cex4 (and ap) fails (expected)
   LPAR with CEX5: boots, loading =zcrypt_cex4= succeeds,
   /sys/bus/ap/devices/card*/type present after explicit module
   loading

3. CONFIG_MODULES unset, CONFIG_ZCRYPT=y:
   KVM: boots, no /sys/bus/ap (expected)
   LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present

No further testing (user-space functionality) was done.

Fixes: 3b6245fd303f ("s390/zcrypt: Separate msgtype implementation from card modules.")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

On systems without AP bus (e.g. KVM) the kernel crashes during init
calls when zcrypt is built-in:

kernel BUG at drivers/base/driver.c:153!
illegal operation: 0001 ilc:1 [#1] SMP
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.0+ #221
task: 0000000010a40000 ti: 0000000010a48000 task.ti:0000000010a48000
Krnl PSW : 0704c00180000000 0000000000592bd6(driver_register+0x106/0x140)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
           0000000000000012 0000000000000000 0000000000c45328 0000000000c44e30
           00000000009ef63c 000000000067f598 0000000000cf3c58 0000000000000000
           000000000000007b 0000000000cb1030 0000000000000002 0000000000000000
           0000000000ca8580 0000000010306700 00000000001001d8 0000000010a4bd88
Krnl Code: 0000000000592bc6: f0b00004ebcf	srp 4(12,%r0),3023(%r14),0
           0000000000592bcc: f0a0000407f4       srp     4(11,%r0),2036,0
          #0000000000592bd2: a7f40001           brc     15,592bd4
          >0000000000592bd6: e330d0000004       lg      %r3,0(%r13)
           0000000000592bdc: c0200021edfd       larl    %r2,9d07d6
           0000000000592be2: c0e500126d8f       brasl   %r14,7e0700
           0000000000592be8: e330d0080004       lg      %r3,8(%r13)
           0000000000592bee: a7f4ffab           brc     15,592b44
Call Trace:
([<00000000001001c8>] do_one_initcall+0x90/0x1d0)
 [<0000000000c6dd34>] kernel_init_freeable+0x1e4/0x2a0
 [<00000000007db53a>] kernel_init+0x2a/0x120
 [<00000000007e8ece>] kernel_thread_starter+0x6/0xc
 [<00000000007e8ec8>] kernel_thread_starter+0x0/0xc
Last Breaking-Event-Address:
 [<0000000000592bd2>] driver_register+0x102/0x140

When zcrypt is built as a module, the module loader ensures that the
driver modules cannot be loaded if the AP bus module returns an error
during initialisation. But if zcrypt and the driver are built-in, the
driver is getting initialised even if the AP bus initialisation
failed. The driver invokes ap_driver_register() during initialisation,
which then causes operations on uninitialised data structures to be
performed.

Explicitly protect ap_driver_register() by introducing an
"initialised" flag that gets set iff the AP bus initialisation was
successful. When the AP bus initialisation failed,
ap_driver_register() will error out with -ENODEV, causing the driver
initialisation to fail as well.

Test results:
1. Inside KVM (no AP bus), zcrypt built-in

   Boots. /sys/bus/ap not present (expected).

2. Inside KVM (no AP bus), zcrypt as module

   Boots. Loading zcrypt_cex4 fails because loading ap_bus fails
   (expected).

3. On LPAR with CEX5, zcrypt built-in

   Boots. /sys/bus/ap/devices/card* present but .../card*/type missing
   (i.e. zcrypt_device_register() fails, unrelated issue).

4. On LPAR with CEX5, zcrypt as module

   Boots. Loading zcrypt_cex4 successful,
   /sys/bus/ap/devices/card*/type present. No further testing
   (user-space functionality) was done.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Allow to ipl from CCW based devices residing in any subchannel set.

Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Simplify the css_generate_pgid code by using stap() independent of
CONFIG_SMP. For !CONFIG_SMP builds stap() will deliver the address
of the cpu we IPL'ed from (which can be != 0).

Note: the ifdef was likely added to be compatible with _very_ old
machines which we don't support anyway.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>

Pull s390 updates from Martin Schwidefsky:
 "There is only one new feature in this pull for the 4.4 merge window,
  most of it is small enhancements, cleanup and bug fixes:

   - Add the s390 backend for the software dirty bit tracking.  This
     adds two new pgtable functions pte_clear_soft_dirty and
     pmd_clear_soft_dirty which is why there is a hit to
     arch/x86/include/asm/pgtable.h in this pull request.

   - A series of cleanup patches for the AP bus, this includes the
     removal of the support for two outdated crypto cards (PCICC and
     PCICA).

   - The irq handling / signaling on buffer full in the runtime
     instrumentation code is dropped.

   - Some micro optimizations: remove unnecessary memory barriers for a
     couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for
     spin_unlock.  Use the builtin bswap if available and make
     test_and_set_bit_lock more cache friendly.

   - Statistics and a tracepoint for the diagnose calls to the
     hypervisor.

   - The CPU measurement facility support to sample KVM guests is
     improved.

   - The vector instructions are now always enabled for user space
     processes if the hardware has the vector facility.  This simplifies
     the FPU handling code.  The fpu-internal.h header is split into fpu
     internals, api and types just like x86.

   - Cleanup and improvements for the common I/O layer.

   - Rework udelay to solve a problem with kprobe.  udelay has busy loop
     semantics but still uses an idle processor state for the wait"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
  s390: remove runtime instrumentation interrupts
  s390/cio: de-duplicate subchannel validation
  s390/css: unneeded initialization in for_each_subchannel
  s390/Kconfig: use builtin bswap
  s390/dasd: fix disconnected device with valid path mask
  s390/dasd: fix invalid PAV assignment after suspend/resume
  s390/dasd: fix double free in dasd_eckd_read_conf
  s390/kernel: fix ptrace peek/poke for floating point registers
  s390/cio: move ccw_device_stlck functions
  s390/cio: move ccw_device_call_handler
  s390/topology: reduce per_cpu() invocations
  s390/nmi: reduce size of percpu variable
  s390/nmi: fix terminology
  s390/nmi: remove casts
  s390/nmi: remove pointless error strings
  s390: don't store registers on disabled wait anymore
  s390: get rid of __set_psw_mask()
  s390/fpu: split fpu-internal.h into fpu internals, api, and type headers
  s390/dasd: fix list_del corruption after lcu changes
  s390/spinlock: remove unneeded serializations at unlock
  ...