linux-toradex.git/drivers/scsi/aacraid/aacraid.h, branch v3.11

[SCSI] aacraid: Dual firmware image support

2013-04-10T18:55:52+00:00

This patch adds dual flash firmware support for Series 7 and above controllers.

[thenzl: used ssleep(10) instead udelay]
Signed-off-by: Mahesh Rajashekhara 
Reviewed-by: Tomas Henzl 
Signed-off-by: James Bottomley

[SCSI] aacraid: 1024 max outstanding command support for Series 7 and above

2013-01-30T03:07:48+00:00

Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: James Bottomley

[SCSI] aacraid: SCSI dma mapping failure case handling

2012-11-27T04:59:46+00:00

This patch handles SCSI dma mapping failure case. Reporting error code to the
upper layer instead of BUG_ON().

Signed-off-by: Mahesh Rajashekhara 
Reviewed-by: Tomas Henzl 
Signed-off-by: James Bottomley

[SCSI] aacraid: Series 7 Async. (performance) mode support

2012-07-20T07:59:04+00:00

- Series 7 Async. (performance) mode support added
- New scatter/gather list format for Series 7
- Driver converts s/g list to a firmware suitable list for best performance on
  Series 7, this can be disabled with driver parameter "aac_convert_sgl" for
  testing purposes
- New container read/write command structure for Series 7
- Fast response support for the SCSI pass-through path added
- Async. status response buffer changes

Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: James Bottomley

[SCSI] aacraid: Use resource_size_t for IO mem pointers and offsets

2012-07-20T07:58:43+00:00

This also stops using the "legacy crap" in Scsi_Host (shost->base is an
unsigned long).

This affected 32-bit systems that have 64-bit resource sizes, causing the
IO address to be truncated.

Signed-off-by: Ben Collins 
Acked-by: Achim Leubner 
Signed-off-by: James Bottomley

[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers

2012-02-19T14:09:01+00:00

Added Sync. mode to support Series 7/8/9 controller families: This is a
compatibility mode for all these controller families. The Async. (Performance)
mode can be changed in the future.  First Async. mode version added for Series
7; Controller parameter aac_sync_mode added

Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: James Bottomley

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family

2011-03-23T16:36:58+00:00

Added new hardware device 0x28b interface for PMC-Sierra's SRC based
controller family.

- new src.c file for 0x28b specific functions
- new XPORT header required
- sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT)
- async. Interface: different inbound queue handling, no outbound I2O
  queue available, using doorbell ("PmDoorBellResponseSent") and
  response buffer on the host ("host_rrq") for status
- changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending"
  bit to inform about pending AIF, "AifRequest" command to read AIF,
  "NoMoreAifDataAvailable" to mark the end of the AIFs

Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: James Bottomley

[SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline

2010-05-17T02:58:27+00:00

Problem description:
--------------------

The problem reported by one of the customer was when a logical array
is deleted(from the SDK, from the GUI, from arcconf) then the
corresponding physical device (/dev/sdb, for example) is not removed
from the Linux namespace. So you end up with a "dead" device
entry. And some of the linux tools go slightly wonky.

Solution:
---------

Based on the notification from FW, the driver calls
"scsi_remove_device" for the DELETED drive. This call not only informs
the scsi device status to the SCSI mid layer and also it will remove
corresponding scsi device entries from the Linux sysfs.

Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: James Bottomley

[SCSI] aacraid: respond automatically to volumes added by config tool

2010-05-17T02:28:04+00:00

Problem description:
--------------------

When the JBOD is created from the OS using Adaptec Storage Manager
utility device is not available under FDISK until a system restart is
done.

Solution:
---------

AIF handling: If there is a JBOD drive added to the system, identify
the old one with scsi_device_lookup() and remove it to enable a fresh
scsi_add_device(); else the new JBOD is not available until reboot.

Signed-off-by: Mahesh Rajashekhara 
Signed-off-by: James Bottomley