linux-toradex.git/drivers/scsi/aacraid/commsup.c, branch v3.6.1 Linux kernel for Apalis and Colibri modules [SCSI] aacraid: Series 7 Async. (performance) mode support 2012-07-20T07:59:04+00:00 Mahesh Rajashekhara Mahesh_Rajashekhara@pmc-sierra.com 2012-07-14T12:48:51+00:00 85d22bbf6787c240921539bba224eb221bfb8ee1 - Series 7 Async. (performance) mode support added - New scatter/gather list format for Series 7 - Driver converts s/g list to a firmware suitable list for best performance on Series 7, this can be disabled with driver parameter "aac_convert_sgl" for testing purposes - New container read/write command structure for Series 7 - Fast response support for the SCSI pass-through path added - Async. status response buffer changes Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Series 7 Async. (performance) mode support added
- New scatter/gather list format for Series 7
- Driver converts s/g list to a firmware suitable list for best performance on
  Series 7, this can be disabled with driver parameter "aac_convert_sgl" for
  testing purposes
- New container read/write command structure for Series 7
- Fast response support for the SCSI pass-through path added
- Async. status response buffer changes

Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] aacraid: Relax the tight timeout loop on fib commands 2012-07-20T07:58:44+00:00 Ben Collins bcollins@ubuntu.com 2012-06-11T18:44:44+00:00 30002f1c02ada69342443e7ed5ee9118feb89510 The loop that waited for syncronous fib commands was causing a CPU stall when a timeout actually occured. 1) Switch to using a more accurate timeout mechanism. 2) Do not pace the loop with udelay(). Use cpu_relax() to allow for scheduling to occur. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
The loop that waited for syncronous fib commands was causing a CPU stall
when a timeout actually occured.

1) Switch to using a more accurate timeout mechanism.
2) Do not pace the loop with udelay(). Use cpu_relax() to allow for
   scheduling to occur.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers 2012-02-19T14:09:01+00:00 Mahesh Rajashekhara Mahesh_Rajashekhara@pmc-sierra.com 2012-02-09T06:51:04+00:00 116046127d1a3bad2853d02781ad9fee33f05e5a Added Sync. mode to support Series 7/8/9 controller families: This is a compatibility mode for all these controller families. The Async. (Performance) mode can be changed in the future. First Async. mode version added for Series 7; Controller parameter aac_sync_mode added Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
Added Sync. mode to support Series 7/8/9 controller families: This is a
compatibility mode for all these controller families. The Async. (Performance)
mode can be changed in the future.  First Async. mode version added for Series
7; Controller parameter aac_sync_mode added

Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] aacraid: reset should disable MSI interrupt 2011-09-22T07:17:32+00:00 Vasily Averin vvs@parallels.com 2011-09-02T15:31:46+00:00 d0efab26f89506387a1bde898556660e06d7eb15 scsi reset on hardware with enabled MSI interrupts generates WARNING message [11027.798722] aacraid: Host adapter abort request (0,0,0,0) [11027.798814] aacraid: Host adapter reset request. SCSI hang ? [11087.762237] aacraid: SCSI bus appears hung [11135.082543] ------------[ cut here ]------------ [11135.082646] WARNING: at drivers/pci/msi.c:658 pci_enable_msi_block+0x251/0x290() Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
scsi reset on hardware with enabled MSI interrupts generates WARNING message

[11027.798722] aacraid: Host adapter abort request (0,0,0,0)
[11027.798814] aacraid: Host adapter reset request. SCSI hang ?
[11087.762237] aacraid: SCSI bus appears hung
[11135.082543] ------------[ cut here ]------------
[11135.082646] WARNING: at drivers/pci/msi.c:658 pci_enable_msi_block+0x251/0x290()

Signed-off-by: Vasily Averin <vvs@sw.ru>
Acked-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Fix common misspellings 2011-03-31T14:26:23+00:00 Lucas De Marchi lucas.demarchi@profusion.mobi 2011-03-31T01:57:33+00:00 25985edcedea6396277003854657b5f3cb31a628 Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> 
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family 2011-03-23T16:36:58+00:00 Mahesh Rajashekhara Mahesh_Rajashekhara@pmc-sierra.com 2011-03-17T09:10:32+00:00 e8b12f0fb8352237525961f14ec933e915848840 Added new hardware device 0x28b interface for PMC-Sierra's SRC based controller family. - new src.c file for 0x28b specific functions - new XPORT header required - sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT) - async. Interface: different inbound queue handling, no outbound I2O queue available, using doorbell ("PmDoorBellResponseSent") and response buffer on the host ("host_rrq") for status - changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending" bit to inform about pending AIF, "AifRequest" command to read AIF, "NoMoreAifDataAvailable" to mark the end of the AIFs Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 
Added new hardware device 0x28b interface for PMC-Sierra's SRC based
controller family.

- new src.c file for 0x28b specific functions
- new XPORT header required
- sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT)
- async. Interface: different inbound queue handling, no outbound I2O
  queue available, using doorbell ("PmDoorBellResponseSent") and
  response buffer on the host ("host_rrq") for status
- changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending"
  bit to inform about pending AIF, "AifRequest" command to read AIF,
  "NoMoreAifDataAvailable" to mark the end of the AIFs

Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
tree-wide: fix comment/printk typos 2010-11-01T19:38:34+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2010-11-01T19:38:34+00:00 b595076a180a56d1bb170e6eceda6eb9d76f4cd3 "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[SCSI] aacraid: semaphore cleanup 2010-09-17T02:54:09+00:00 Thomas Gleixner tglx@linutronix.de 2010-09-07T14:32:47+00:00 6de76cfc7db8844bc26ab9a60b20f50ad7851833 Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: aacraid@adaptec.com Signed-off-by: James Bottomley <James.Bottomley@suse.de> 
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: aacraid@adaptec.com
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
[SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline 2010-05-17T02:58:27+00:00 Rajashekhara, Mahesh Mahesh_Rajashekhara@adaptec.com 2010-05-10T11:29:25+00:00 9cccde93fed1ca988eb2fb17ab9194bf7b5ed1b0 Problem description: -------------------- The problem reported by one of the customer was when a logical array is deleted(from the SDK, from the GUI, from arcconf) then the corresponding physical device (/dev/sdb, for example) is not removed from the Linux namespace. So you end up with a "dead" device entry. And some of the linux tools go slightly wonky. Solution: --------- Based on the notification from FW, the driver calls "scsi_remove_device" for the DELETED drive. This call not only informs the scsi device status to the SCSI mid layer and also it will remove corresponding scsi device entries from the Linux sysfs. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 
Problem description:
--------------------

The problem reported by one of the customer was when a logical array
is deleted(from the SDK, from the GUI, from arcconf) then the
corresponding physical device (/dev/sdb, for example) is not removed
from the Linux namespace. So you end up with a "dead" device
entry. And some of the linux tools go slightly wonky.

Solution:
---------

Based on the notification from FW, the driver calls
"scsi_remove_device" for the DELETED drive. This call not only informs
the scsi device status to the SCSI mid layer and also it will remove
corresponding scsi device entries from the Linux sysfs.

Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
[SCSI] aacraid: respond automatically to volumes added by config tool 2010-05-17T02:28:04+00:00 Rajashekhara, Mahesh Mahesh_Rajashekhara@adaptec.com 2010-05-10T11:05:50+00:00 5ca05594097438f81337e53ad50c2d17ffc28238 Problem description: -------------------- When the JBOD is created from the OS using Adaptec Storage Manager utility device is not available under FDISK until a system restart is done. Solution: --------- AIF handling: If there is a JBOD drive added to the system, identify the old one with scsi_device_lookup() and remove it to enable a fresh scsi_add_device(); else the new JBOD is not available until reboot. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 
Problem description:
--------------------

When the JBOD is created from the OS using Adaptec Storage Manager
utility device is not available under FDISK until a system restart is
done.

Solution:
---------

AIF handling: If there is a JBOD drive added to the system, identify
the old one with scsi_device_lookup() and remove it to enable a fresh
scsi_add_device(); else the new JBOD is not available until reboot.

Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>