linux-toradex.git/drivers/scsi/aacraid, branch v4.9.91

scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path

2018-02-03T16:05:40+00:00

[ Upstream commit e4717292ddebcfe231651b5aff9fa19ca158d178 ]

As part of the scsi EH path, aacraid performs a reinitialization of the
adapter, which encompass freeing resources and IRQs, NULLifying lots of
pointers, and then initialize it all over again.  We've identified a
problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ
is enabled on kernel config file.

Happens that, in case this flag was set, right after free_irq()
effectively clears the interrupt, it checks if it was requested as
IRQF_SHARED. In positive case, it performs another call to the IRQ
handler on driver. Problem is: since aacraid currently free some
resources *before* freeing the IRQ, once free_irq() path calls the
handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL
pointer dereference with the following trace:

  aac_src_intr_message+0xf8/0x740 [aacraid]
  __free_irq+0x33c/0x4a0
  free_irq+0x78/0xb0
  aac_free_irq+0x13c/0x150 [aacraid]
  aac_reset_adapter+0x2e8/0x970 [aacraid]
  aac_eh_reset+0x3a8/0x5d0 [aacraid]
  scsi_try_host_reset+0x74/0x180
  scsi_eh_ready_devs+0xc70/0x1510
  scsi_error_handler+0x624/0xa20

This patch prevents the crash by changing the order of the
deinitialization in this path of aacraid: first we clear the IRQ, then
we free other resources. No functional change intended.

Signed-off-by: Guilherme G. Piccoli 
Reviewed-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: Process Error for response I/O

2017-11-08T09:08:35+00:00

[ Upstream commit 4ec57fb4edaec523f0f78a0449a3b063749ac58b ]

Make sure that the driver processes error conditions even in the fast
response path for response from the adapter.

Signed-off-by: Raghava Aditya Renukunta 
Signed-off-by: Dave Carroll 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: Reorder Adapter status check

2017-03-12T05:41:45+00:00

commit c421530bf848604e97d0785a03b3fe2c62775083 upstream.

The driver currently checks the SELF_TEST_FAILED first and then
KERNEL_PANIC next. Under error conditions(boot code failure) both
SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time.

The driver has the capability to reset the controller on an KERNEL_PANIC,
but not on SELF_TEST_FAILED.

Fixed by first checking KERNEL_PANIC and then the others.

Fixes: e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family)
Signed-off-by: Raghava Aditya Renukunta 
Reviewed-by: David Carroll 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: Fix INTx/MSI-x issue with older controllers

2017-02-14T23:25:39+00:00

commit 8af8e1c22f9994bb1849c01d66c24fe23f9bc9a0 upstream.

commit 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang")

caused a problem on older controllers which do not support MSI-x (namely
ASR3405,ASR3805). This patch conditionalizes the previous patch to
controllers which support MSI-x

Fixes: 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang")
Reported-by: Arkadiusz Miskiewicz 
Signed-off-by: Dave Carroll 
Reviewed-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: remove wildcard for series 9 controllers

2017-01-09T07:32:22+00:00

commit ae2aae2421983f6f68eb7c4692624bc43ea50712 upstream.

Controllers with this PCI ID never shipped outside of
PMCS/Microsemi. Remove the ID from the aacraid driver. smartpqi is the
correct driver for these controllers.

[mkp: patch description]

Reviewed-by: Scott Teel 
Signed-off-by: Kevin Barnett 
Signed-off-by: Don Brace 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2016-10-07T16:28:53+00:00

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (hpsa,
  be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
  called smartpqi for which a driver is added, there's some cleanup work
  of the ibm vscsi target and updates to libfc, plus a whole host of
  minor fixes and updates and finally the removal of several ISA drivers
  which seem not to have been used for years"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
  scsi: mvsas: Mark symbols static where possible
  scsi: pm8001: Mark symbols static where possible
  scsi: arcmsr: Simplify user_len checking
  scsi: fcoe: fix off by one in eth2fc_speed()
  scsi: dtc: remove from tree
  scsi: t128: remove from tree
  scsi: pas16: remove from tree
  scsi: u14-34f: remove from tree
  scsi: ultrastor: remove from tree
  scsi: in2000: remove from tree
  scsi: wd7000: remove from tree
  scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
  scsi: lpfc: Mark symbols static where possible
  scsi: hpsa: correct call to hpsa_do_reset
  scsi: ufs: Get a TM service response from the correct offset
  scsi: ibmvfc: Fix I/O hang when port is not mapped
  scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
  scsi: ipr: Remove redundant messages at adapter init time
  scsi: ipr: Don't log unnecessary 9084 error details
  scsi: smartpqi: raid bypass lba calculation fix
  ...

scsi: aacraid: mark aac_src_select_comm() static

2016-09-09T11:08:38+00:00

We get 1 warning when building kernel with W=1:
drivers/scsi/aacraid/src.c:616:5: warning: no previous prototype for 'aac_src_select_comm' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is declared
and don't need a declaration, but can be made static.  so this patch
marks this function with 'static'.

Signed-off-by: Baoyou Xie 
Acked-by: Arnd Bergmann 
Acked-by: Dave Carroll 
Signed-off-by: Martin K. Petersen

aacraid: Check size values after double-fetch from user

2016-08-09T01:34:02+00:00

In aacraid's ioctl_send_fib() we do two fetches from userspace, one the
get the fib header's size and one for the fib itself. Later we use the
size field from the second fetch to further process the fib. If for some
reason the size from the second fetch is different than from the first
fix, we may encounter an out-of- bounds access in aac_fib_send(). We
also check the sender size to insure it is not out of bounds. This was
reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was
assigned CVE-2016-6480.

Reported-by: Pengfei Wang 
Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)'
Cc: stable@vger.kernel.org
Signed-off-by: Dave Carroll 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen

aacraid: use kmemdup

2016-07-13T03:16:31+00:00

Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.

Signed-off-by: Muhammad Falak R Wani 
Reviewed-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

aacraid: do not activate events on non-SRC adapters

2016-05-22T18:53:07+00:00

Only SRC-based adapters support the AifReqEvent function, so there is no
point in trying to activate it on older, non-SRC based adapters.  Doing
so lead to crashes on older adapters.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen