linux-toradex.git/drivers/scsi/aic7xxx, branch v4.3.2

aic7xxx: Fix typo in error message

2015-08-07T12:36:05+00:00

This fixes "referenced" where it is spelled "referrenced".

Signed-off-by: Nik Nyby 
Signed-off-by: Jiri Kosina

aic7xxx: replace kmalloc/memset by kzalloc

2015-04-09T20:22:10+00:00

This replaces kmalloc + memset by a call to kzalloc

This also fixes one checkpatch.pl issue in the process.

This improvement was suggested by "make coccicheck"

Signed-off-by: Michael Opdenacker 
Reviewed-by: Hannes Reinecke 
Signed-off-by: James Bottomley

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2015-02-11T18:28:45+00:00

Pull first round of SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas,
  megaraid_sas, ses) plus an assortment of minor updates.

  There's also an update to ufs which adds new phy drivers and finally a
  new logging infrastructure for SCSI"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits)
  scsi_logging: return void for dev_printk() functions
  scsi: print single-character strings with seq_putc
  scsi: merge consecutive seq_puts calls
  scsi: replace seq_printf with seq_puts
  aha152x: replace seq_printf with seq_puts
  advansys: replace seq_printf with seq_puts
  scsi: remove SPRINTF macro
  sg: remove an unused variable
  hpsa: Use local workqueues instead of system workqueues
  hpsa: add in P840ar controller model name
  hpsa: add in gen9 controller model names
  hpsa: detect and report failures changing controller transport modes
  hpsa: shorten the wait for the CISS doorbell mode change ack
  hpsa: refactor duplicated scan completion code into a new routine
  hpsa: move SG descriptor set-up out of hpsa_scatter_gather()
  hpsa: do not use function pointers in fast path command submission
  hpsa: print CDBs instead of kernel virtual addresses for uncommon errors
  hpsa: do not use a void pointer for scsi_cmd field of struct CommandList
  hpsa: return failed from device reset/abort handlers
  hpsa: check for ctlr lockup after command allocation in main io path
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2015-02-11T02:57:15+00:00

Pull trivial tree changes from Jiri Kosina:
 "Patches from trivial.git that keep the world turning around.

  Mostly documentation and comment fixes, and a two corner-case code
  fixes from Alan Cox"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  kexec, Kconfig: spell "architecture" properly
  mm: fix cleancache debugfs directory path
  blackfin: mach-common: ints-priority: remove unused function
  doubletalk: probe failure causes OOPS
  ARM: cache-l2x0.c: Make it clear that cache-l2x0 handles L310 cache controller
  msdos_fs.h: fix 'fields' in comment
  scsi: aic7xxx: fix comment
  ARM: l2c: fix comment
  ibmraid: fix writeable attribute with no store method
  dynamic_debug: fix comment
  doc: usbmon: fix spelling s/unpriviledged/unprivileged/
  x86: init_mem_mapping(): use capital BIOS in comment

scsi: print single-character strings with seq_putc

2015-02-02T17:57:46+00:00

Using seq_putc to print a single character saves at least a strlen()
call and a memory access, and may also give a small .text reduction.

Signed-off-by: Rasmus Villemoes 
Reviewed-by: Finn Thain 
Signed-off-by: Christoph Hellwig

scsi: replace seq_printf with seq_puts

2015-02-02T17:57:45+00:00

Using seq_printf to print a simple string is a lot more expensive than
it needs to be, since seq_puts exists. Replace seq_printf with
seq_puts when possible.

Signed-off-by: Rasmus Villemoes 
Reviewed-by: Finn Thain 
Signed-off-by: Christoph Hellwig

scsi: aic7xxx: fix comment

2015-01-20T12:49:43+00:00

Signed-off-by: Geert Uytterhoeven 
Cc: Hannes Reinecke 
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jiri Kosina

scsi: drop reason argument from ->change_queue_depth

2014-11-24T13:45:27+00:00

Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Mike Christie 
Reviewed-by: Hannes Reinecke

scsi: don't set tagging state from scsi_adjust_queue_depth

2014-11-12T10:19:43+00:00

Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Mike Christie 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Martin K. Petersen

scsi: always assign block layer tags if enabled

2014-11-12T10:19:43+00:00

Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq.  This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Mike Christie 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Hannes Reinecke