linux-toradex.git/drivers/scsi/atari_NCR5380.c, branch v3.17-rc2

scsi: use 64-bit LUNs

2014-07-17T20:07:37+00:00

The SCSI standard defines 64-bit values for LUNs, and large arrays
employing large or hierarchical LUN numbers become more and more
common.

So update the linux SCSI stack to use 64-bit LUN numbers.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Ewan Milne 
Signed-off-by: Christoph Hellwig

scsi/NCR5380: fix and standardize NDEBUG macros

2014-05-28T10:10:43+00:00

All three NCR5380 core driver implementations share the same NCR5380.h
header file so they need to agree on certain macro definitions.

The flag bit used by the NDEBUG_MERGING macro in atari_NCR5380 and
sun3_NCR5380 collides with the bit used by NDEBUG_LISTS.

Moreover, NDEBUG_ABORT appears in NCR5380.c so it should be defined in
NCR5380.h rather than in each of the many drivers using that core.

An undefined NDEBUG_ABORT macro caused compiler errors and led to dodgy
workarounds in the core driver that can now be removed.
(See commits f566a576bca09de85bf477fc0ab2c8c96405b77b and
185a7a1cd79b9891e3c17abdb103ba1c98d6ca7a.)

Move all of the NDEBUG_ABORT, NDEBUG_TAGS and NDEBUG_MERGING macro
definitions into NCR5380.h where all the other NDEBUG macros live.

Also, incorrect "#ifdef NDEBUG" becomes "#if NDEBUG" to fix the warning:
drivers/scsi/mac_scsi.c: At top level:
drivers/scsi/NCR5380.c:418: warning: 'NCR5380_print' defined but not used
drivers/scsi/NCR5380.c:459: warning: 'NCR5380_print_phase' defined but not used

The debugging code is now enabled when NDEBUG != 0.

Signed-off-by: Finn Thain 
Acked-by: Sam Creasey 
Signed-off-by: Christoph Hellwig

scsi/NCR5380: adopt dprintk()

2014-05-28T10:10:43+00:00

All NCR5380 drivers already include the NCR5380.h header. Better to
adopt those macros rather than have three variations on them.

Moreover, the macros in NCR5380.h are preferable because the atari_NCR5380
and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
dprintk(NDEBUG_MAIN | NDEBUG_QUEUES, ...)

Replace the *_PRINTK macros from atari_NCR5380.h and sun3_NCR5380.h with
the equivalent macros from NCR5380.h.

Signed-off-by: Finn Thain 
Acked-by: Sam Creasey 
Acked-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase()

2014-05-28T10:05:37+00:00

All NCR5380 drivers already include the NCR5380.h header. Better to
adopt those macros rather than have three variations on them.

Moreover, the macros in NCR5380.h are preferable anyway: the atari_NCR5380
and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
NCR5380_dprint(NDEBUG_MAIN | NDEBUG_QUEUES, ...)

Replace the NCR_PRINT* macros from atari_NCR5380.h and sun3_NCR5380.h with
the equivalent macros from NCR5380.h.

Signed-off-by: Finn Thain 
Acked-by: Sam Creasey 
Acked-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

m68k/atari - atari_scsi: change abort/reset return codes

2014-05-19T17:12:24+00:00

[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code]

The abort/reset lowlevel return codes had changed with the new
error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this.

Change reset handling for Atari to clear queues only, do not attempt
to call done() on each command aborted by the reset. The EH code
should do that for us. Queues _must_ be cleared, otherwise
atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking
further error recovery.

Update the Sun3 NCR5380 driver as well - the Sun3 driver was
derived from the Atari one. Kudos to Finn Thain for the Sun3 part
and cleaning up the header files. After the header cleanup, the
initio.h include (!) can be dropped from sun3_scsi.h now.

Signed-off-by: Michael Schmitz 
Signed-off-by: Finn Thain 
Acked-by: Sam Creasey 
Cc: Geert Uytterhoeven 
Cc: James E.J. Bottomley 
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Christoph Hellwig

atari_scsi: switch to ->show_info()

2013-04-09T18:13:29+00:00

Signed-off-by: Al Viro

[SCSI] atari_NCR5380: Provide a dummy NCR5380_exit()

2011-06-29T20:11:21+00:00

and call it from atari_scsi_release(), cfr. the other NCR5380 drivers.

This fixes:

drivers/scsi/NCR5380.h:303: warning: ‘NCR5380_exit’ declared ‘static’ but never defined

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: James Bottomley

[SCSI] atari_NCR5380: Remove obsolete variable oldto

2011-06-29T17:13:31+00:00

commit 8ce7955aa52c37db1425ea4bd4edcfa67e253454 ("[SCSI] atari_NCR5380:
update_timeout removal") removed all users, but not the avtual variable.

Suggested-by: Ben Hutchings 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: James Bottomley

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

SCSI host lock push-down

2010-11-16T21:33:23+00:00

Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik 
Acked-by: James Bottomley 
Signed-off-by: Linus Torvalds