linux-toradex.git/drivers/scsi/bfa/bfa_fcs.c, branch v3.4.45 Linux kernel for Apalis and Colibri modules [SCSI] bfa: Add FC-transport based Asynchronous Event Notification support. 2011-07-27T10:41:24+00:00 Krishna Gudipati kgudipat@brocade.com 2011-07-20T23:59:13+00:00 7826f304b1efa5ab839cf029742290f51c4fa009 - Added support to post vendor unique events on fc_host. - Supports adapter, port, ioc, flash and remote port based AEN events. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Added support to post vendor unique events on fc_host.
- Supports adapter, port, ioc, flash and remote port based AEN events.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] bfa: FCS bug fixes. 2011-06-29T22:12:11+00:00 Krishna Gudipati kgudipat@brocade.com 2011-06-25T03:24:52+00:00 d7be54cc5c5f6f9cb9ac67462aadda57813698b8 - Added logic to initiate a PLOGI to the target, while processing a LOGO from the same target in Direct attach mode. - Added logic to generate a FCCT Reject indicating unsupported command, upon receiving FCCT/FCGS requests. - Added logic to set the fcpim in offline state and avoid any PRLI retries if a PRLI response is a reject with a reason Command Not Supported. - Updated the FDMI Supported/Current speeds. - Added logic to wait for the response from the firmware before sending ACC to PLOGI and transitioning to subsequent states - while processing an Incoming PLOGI in online state. - Added a wait state in the fcs_vport state machine - For case where FDISC is in progress and we get a vport delete request we wait for fdisc response and will transition to the appropriate state based on rsp status, else its causing both driver/fw resources to be not freed. - Remove the fc_credit_recovery module param. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Added logic to initiate a PLOGI to the target, while processing a LOGO
  from the same target in Direct attach mode.
- Added logic to generate a FCCT Reject indicating unsupported command,
  upon receiving FCCT/FCGS requests.
- Added logic to set the fcpim in offline state and avoid any PRLI retries
  if a PRLI response is a reject with a reason Command Not Supported.
- Updated the FDMI Supported/Current speeds.
- Added logic to wait for the response  from the firmware before sending
  ACC to PLOGI and transitioning to subsequent states - while processing an
  Incoming PLOGI in online state.
- Added a wait state in the fcs_vport state machine - For case where
  FDISC is in progress and we get a vport delete request we wait for
  fdisc response and will transition to the appropriate state based on
  rsp status, else its causing both driver/fw resources to be not
  freed.
- Remove the fc_credit_recovery module param.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support. 2011-06-29T22:02:28+00:00 Krishna Gudipati kgudipat@brocade.com 2011-06-25T03:24:08+00:00 3fd459804ff8e002db2671900debd0fc6dc6c443 - Introduced partitioning of the BFA resources. - Added h/w queue ID in CPE messages, firmware uses h/w queue ID from messages to pick a matching RME queue. - Added message header to bfa_reqq_produce(). h/w queue ID is set in the message header and firmware modules use h/w queue ID from message header instead of from cpqe event. - Made changes to allow using all 256 queues of Brocade-1860 asic. Previously only a single queue per queue group was used. - Added function tag to BFI message header. Only used by FC BFI messages. Used to translate host tag to firmware tag. bfa_lpuid() is changed to bfa_fn_lpu() that encodes both PCI function and port ID in BFI message header. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Introduced partitioning of the BFA resources.
- Added h/w queue ID in CPE messages, firmware uses h/w queue ID
  from messages to pick a matching RME queue.
- Added message header to bfa_reqq_produce(). h/w queue ID is set
  in the message header and firmware modules use h/w queue ID from
  message header instead of from cpqe event.
- Made changes to allow using all 256 queues of Brocade-1860 asic.
  Previously only a single queue per queue group was used.
- Added function tag to BFI message header. Only used by FC BFI
  messages.  Used to translate host tag to firmware tag. bfa_lpuid()
  is changed to bfa_fn_lpu() that encodes both PCI function and port
  ID in BFI message header.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] bfa: Add BSG interface to support ELS, CT and vendor commands. 2011-06-29T20:59:53+00:00 Krishna Gudipati kgudipat@brocade.com 2011-06-13T22:55:11+00:00 b85daafe46eeb0a9ad32c4b2c3a4e09ffcae9599 - Added BSG interface support to BFA driver - Adds support to send ELS/CT FC passthru commands and few vendor specific BSG requests. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Added BSG interface support to BFA driver
- Adds support to send ELS/CT FC passthru commands and
  few vendor specific BSG requests.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] bfa: Driver initialization and model description fix 2011-06-29T20:56:05+00:00 Krishna Gudipati kgudipat@brocade.com 2011-06-13T22:54:31+00:00 75332a70a84908810ab5f525b03f230be9e31753 - Moved FCS initialization, which internally does the im_port creation as well as the scsi_host creation before bfa_init. Once the bfa_init is complete & successful: - Reset the FCS base port cfg params such as pwwn/nwwn and setup fc host params - based on the values learned during the ioc getattr request. - Change needed to support BSG commands even on bfa init failure. - Model description fixes for Brocade adapters. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Moved FCS initialization, which internally does the im_port creation
  as well as the scsi_host creation before bfa_init.

Once the bfa_init is complete & successful:
- Reset the FCS base port cfg params such as pwwn/nwwn and setup fc host
  params - based on the values learned during the ioc getattr request.
- Change needed to support BSG commands even on bfa init failure.
- Model description fixes for Brocade adapters.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] bfa: FC credit recovery and misc bug fixes. 2011-06-29T20:52:21+00:00 Krishna Gudipati kgudipat@brocade.com 2011-06-13T22:53:04+00:00 be540a991e2097c313d7304e0daaf89d68011bb9 - Introduce FC credit recovery. - Added module parameter to enable/disable credit recovery. Bug Fixes: - Removed check for ignoring plogi from initiator in switched fabric mode. - The ABTS for PLOGI is going out few millisecs earlier due to FW timer calibration (around 300 miilisecs earlier). So there is a window if an accept comes during this time HBA would have initiated an ABORT. - Added 1 to FC_ELS_TOV for compensating for FW timer. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
- Introduce FC credit recovery.
- Added module parameter to enable/disable credit recovery.

Bug Fixes:
- Removed check for ignoring plogi from initiator in switched fabric mode.
- The ABTS for PLOGI is going out few millisecs earlier due to FW
  timer calibration (around 300 miilisecs earlier). So there is a
  window if an accept comes during this time HBA would have initiated
  an ABORT.
- Added 1 to FC_ELS_TOV for compensating for FW timer.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] bfa: Changes to support vport disable and enable operations. 2011-06-29T20:37:48+00:00 Krishna Gudipati kgudipat@brocade.com 2011-06-13T22:51:24+00:00 dd5aaf4536c5111784a18d935b9b5adeac9f914c Made changes to FCS lport, vport state machines to support vport enable / disable operations. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
Made changes to FCS lport, vport state machines to support vport
enable / disable operations.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Fix common misspellings 2011-03-31T14:26:23+00:00 Lucas De Marchi lucas.demarchi@profusion.mobi 2011-03-31T01:57:33+00:00 25985edcedea6396277003854657b5f3cb31a628 Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> 
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
[SCSI] bfa: replace bfa_assert with WARN_ON 2010-12-31T15:36:53+00:00 Jing Huang huangj@brocade.com 2010-12-27T05:46:35+00:00 d4b671c58ebeb56dfc8fe8bcca25e0a06bc9359a Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
[SCSI] bfa: remove all OS wrappers 2010-12-21T18:32:56+00:00 Maggie Zhang xmzhang@brocade.com 2010-12-10T03:12:32+00:00 f16a17507b09e10e0cccc4d675ccbfe030d51ef1 Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> 
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>